Trailer Wiring Harness Installation - 2013 Buick Enclave- Video
Today on our 2013 Buick Conclave, we'll be installing the Tow Ready, T1 Vehicle Wiring Harness, part number 118579. To begin our installation on the vehicle wiring harness, we'll need to raise the rear hatch of the vehicle. We'll need to remove each of the taillight assemblies. To do this, we'll need to remove two covers that cover up small bolts on each side. You'll see that there's a bolt under each cover. We'll need to remove each of these bolts. Once these two have been removed, we can gently slide the whole light assembly out towards the rear of the vehicle. more
2/10/2014 5:02:29 PM
Trailer Wiring Harness Installation - 2013 Buick Enclave 119147KIT- Video
Today on this 2013 Buick Enclave, we're going to install part number 119147KIT from Tow Ready. First thing we need to do is go ahead and open up the back hatch and get access to the tail lights. Then, we need to remove two plastic covers for the screws. You can pry them just a little bit and they simply pop off. Once we have access to the screws, we'll go ahead and unbolt the tail light. With the screws removed we'll go ahead and gently pull the tail light out backwards and away from the body work. more
10/23/2013 8:18:38 PM
