Best 2009 Buick Enclave Trailer Wiring Options- Video
Speaker 1: Today you're going to be taking a look at the best wiring options for your 2009 Buick Enclave. For your Enclave doesn't have the factory tow package, we're going to have a few different options for that. Over here we're going to have the CURT T-Connector wiring harness. Next to that we're going to have the Tekonsha wiring harness. Then finally over here we're going to have the Hopkins wiring harness.Now obviously they're all going to look a little bit different but the end result is going to give us a four-pole flat trailer connector that's going to provide all the lights to our trailer and safely get down the road.With our Tekonsha and our CURT, you can see they're going to look very similar. Really the main difference here is going to be the color of the wire. more
10/17/2018 9:58:16 AM
Trailer Wiring Harness Installation - 2009 Buick Enclave- Video
Today on this 2009 Buick Enclave we will be installing wiring harness part number 118450. The connection points for our wiring harness are located directly behind the tail light assemblies on both of the drivers and passengers sides. So the first thing we need to do is go ahead and remove both of those. And that will expose the two screws that are holding the tail light onto the vehicle. We will go ahead and remove those. We will just gently pull away the tail light connector that we are going to be connecting our harness into located right here. We want to go ahead and press the tab here at the top of the connector. And that will allow us to pull the two pieces apart. I am going to set the tail light aside for the time being. We will take the harness here and we will start with the connectors that have the yellow and brown wires on it. more
8/26/2009 12:35:13 PM
