Best 2008 Buick Enclave Trailer Wiring Options- Video
Speaker 1: Today you're going to be taking a look at the best wiring options for your 2008 Buick Enclave. For your Enclave doesn't have the factory tow package, we're going to have a few different options for that. Over here we're going to have the CURT T-Connector wiring harness. Next to that we're going to have the Tekonsha wiring harness. Then finally over here we're going to have the Hopkins wiring harness.Now obviously they're all going to look a little bit different but the end result is going to give us a four-pole flat trailer connector that's going to provide all the lights to our trailer and safely get down the road.With our Tekonsha and our CURT, you can see they're going to look very similar. Really the main difference here is going to be the color of the wire. more
10/16/2018 1:06:04 PM
Trailer Wiring Harness Installation - 2008 Buick Enclave- Video
Today on this 2008 Buick Enclave, we're going to install part number 118450 from TowReady, the T1 Vehicle Wiring Harness. To start off our install, we're going to need to open up the back hatch so we can remove the taillights. Once we get access to the taillights, we need to remove 2 screws.They're hidden behind 2 covers. We'll go ahead and pop the covers loose, and then remove the screws. In this case we're using the 7mm socket. Once the screws are removed, we'll go ahead and pull back the taillight. more
11/4/2014 9:06:45 AM
