Tekonsha ZCI Circuit Protected Vehicle Wiring Harness Installation - 2018 Audi Q7- Video
Hi there Audi owners today in your 2017 Audi Q7, we're going to be taking a look at and showing you how to install Tekonsha ZCI four-pole flat connector trailer wiring system. We're going to look at some of the features first, so stick around towards the end, and then we're going to do the installation with you. And this is what our wiring looks like when it's installed. You almost can't even tell that it's there because it's going to be completely hidden on your Q7. When you open up the lift gate, there's an access panel located on the inside right here. And if we open that up, our wiring is located inside. more
3/24/2020 1:32:55 PM
Best 2018 Audi Q7 Trailer Wiring Options- Video
Hi there, Audi owners. Today we're going to be taking a look at the best vehicle wiring options for our 2018 Audi Q7. Here we have our two best wiring options. The option on the left is the one from Tekonsha. And in most aspects, these wiring harnesses are going to be basically identical, but there are a few minor differences between them and we'll cover those now.This is our Tekonsha harness, and as you can see, the module is relatively small, which is nice to be able to fit it into smaller areas, versus our Curt here, which is quite a bit larger.As you can see here on our 2014 Audi Q7, we've got the smaller Tekonsha module installed and we're able to take our wiring and tuck it all up into the little compartment behind our tail light. Whereas if we we're using our Curt the Curt itself would take up just about all the space inside of our compartment here, leaving no place for our wiring, which would require us to have to route it into another location and store it somewhere else, making a lot more work for us.I will say, however, the Curt does have a higher output at 5 amps on the stop turn circuit while our Tekonsha only has 4.2 amps on the stop turn. more
4/15/2019 8:52:17 AM
