bing tracking image

2017 Acura MDX Custom Fit Vehicle Wiring Installation And Review Videos

     

Best 2017 Acura MDX Trailer Wiring Options- Video

Best 2017 Acura MDX Trailer Wiring Options

Ryan: Hey everybody, Ryan here at etrailer. Today, we're going to be taking a look at our best trailer wiring options for your 2017 Acura MDX. So today we're going to be talking about four different wiring kits. These three here are all going to have a 4-way flat connector. And this one over here is going to have a 7-way connector. With that being said, over here we're going to have the Tekonsha 4-way wiring, right here we're going to have the CURT 4-way wiring. more


Watch Video

10/8/2020 2:28:25 PM



Tekonsha T-One Vehicle Wiring Harness Installation - 2017 Acura MDX- Video

Tekonsha T-One Vehicle Wiring Harness Installation - 2017 Acura MDX

Hi there, MDX owners. Today on our 2017 Acura MDX, we're going to be taking a look at and showing you how to install Tekoncha's T-One vehicle wiring harness. And this is what our wiring looks like when it's installed. It's designed to live inside your vehicle, and when you're ready to use it, it simply drapes off the back.It pinches between the weather stripping on your vehicle, which won't cause any damage to the harness and holds it nice in place. This will provide you with all of your necessary lighting, which includes your left turn signal, right turn signal, tail lamps, and brake lamps, keeping you DOT compliant in all states.When not in use, we simply store it in our rear compartment. You can fold up your wiring. more


Watch Video

8/8/2019 11:58:12 AM



Trailer Wiring Harness Installation - 2017 Acura MDX- Video

Trailer Wiring Harness Installation - 2017 Acura MDX

Speaker 1: Today on our 2017 Acura MDX we're going to be installing Curt 4-Pole Flat Trailer Connector wiring harness. Part number C56192.This 4-pole flat connector is going to live inside your vehicle and provide you with all the necessary lighting that you'll need. When you're ready to use it, just flip up your cover exposing your wire. You can then drape it over the back, plug it into your trailer, close your lift gate and it will pinch right between your weather stripping which will be fine. It won't damage the wire, it will hold it right in place.This will give you all the necessary lighting that you need for you trailer including your left turn, right turn, brake lamps, and tail lamps. It's going to be DOT compliant in all states.Included with your kit you'll get a dust cap. more


Watch Video

9/19/2018 10:57:13 AM



  1