Curt T-Connector Vehicle Wiring Harness Installation - 2014 Acura MDX- Video
Hello, neighbors. It's Brad here at etrailer. And today, we're taking a look and installing the CURT trailer wiring harness four-pole on a 2014 Acura MDX. Having a trailer wiring is a great way to keep yourself safe if you do plan on ever towing a trailer because it's gonna send the light sequence that you're using in your vehicle, which is gonna be your running lights, turn signals, and brake lights to the trailer, letting the people behind you know what you're doing and when you're turning and braking. So, that's gonna be a required application when you are towing. Now, this is also a really nice system because it lives outside the vehicle currently. more
7/29/2022 1:54:01 PM
Best 2014 Acura MDX Trailer Wiring Options- Video
Hey, everybody. Ryan here at etrailer.Today, we're going to be taking a look at our best trailer wiring options for your 2014 Acura MDX. So today we're going to be talking about four different wiring kits.These three here are all going to have a 4-way flat connector.And, this one over here is going to have a 7-way connector.With that being said, over here, we're going to have the Tekonsha 4-way wiring.Right here, we're going to have the Curt 4-way wiring.This is going to be the Hopkins 4-way wiring.And as far as our 7-way goes, this is also made by Tekonsha.Now, before we kind of get too carried away, I would like to just say what wiring I would choose if I was putting it on my own MDX. If I needed the 7-way, I would really only have one choice, and that's the Tekonsha over here, which is a great choice. I actually really like the kit, and we'll kind of talk about this setup a little bit later. So for now, let's kind of focus more on the 4-way connectors.If I had to choose one of these for my own Acura, I think I'd definitely go with the Tekonsha, and that's really just because the quality of construction. more
10/7/2020 8:07:09 AM
Trailer Wiring Harness Installation - 2014 Acura MDX- Video
Today on this 2014 Acura MDX, we're going to install part number 118628 from Tow Ready. This is a T-One vehicle wiring harness with a four-pole flat trailer connector. All right. The wiring harness we're going to install inside the vehicle. We'll go underneath the floor covering here and then this cover we have to pull up and out of the way, and this is our spare tire area and off to the left hand side here, we'll install our wiring harness. Using a flat screwdriver, we'll go ahead and pop open this lid. This is the socket where our wiring harness will plug into. We're going to take our plug here for our wiring harness and we're going to route it on the inside plastic and over here. Make sure we keep our white inaudible 00:01:00 ring terminal pulled to the outside because we'll ground that using a factory ground in a few moments. OK. more
11/25/2014 10:27:08 AM
