Tekonsha T-One Vehicle Wiring Harness Installation - 2010 Acura MDX- Video
Today in our 2010 Acura MDX, we're going to be installing Tekonsha's T-One vehicle wiring harness with 4-pole flat trailer connector. This 4-pole trailer wiring harness, it's going to provide you with all your necessary lighting. This includes your left turn signal, right turn signal, tail lamps and brake lamps, keeping you DOT compliant in all states.The wiring itself is designed to live inside the vehicle and when you're ready to use it, you can just drape it out over the back like we have here. As part of our harness there's a module that senses the signals from your turn signals and brake lamps and sends them down to your 4-pole connector. What's nice about this is if you have any faults on your trailer, the module will shut down those circuits, protecting the circuits in your vehicle from any damage.When you're ready to use your wiring, simply pull up your panel. Drape it down over the back, making sure that you avoid your striker there and just shut your lift gate. more
3/18/2019 11:47:14 AM
Best 2010 Acura MDX Trailer Wiring Options- Video
Speaker 1: Today we're going to be taking a look at the best wiring options for our 2010 Acura MDX. Our best two options are going to come from CURT and Tekonsha. They're both going to be similar in their functions, but there are going to be some differences in them that might make one a little bit better suited for your needs.At first glance you'll notice that this one here by CURT does have a fuse, so this one will be fuse-protected, where our Tekonsha's not. It'll just have the internal module protection. The CURT also has internal module protection, but having that extra fuse is kind of nice just in case you do have a short that the module doesn't catch. It won't cause any damage to the component. more
10/29/2018 1:32:44 PM
Trailer Wiring Harness Installation - 2010 Acura MDX- Video
Today, on our 2010 Acura MDX, we will be installing the Curt Wiring Harness, Part Number C56038. First thing we'll start with is opening up the hatch and gaining access to the back of the vehicle. We'll want to go ahead and move this weather cover out of the way, and get into our storage compartment. With that out of the way, we'll pop this threshold trim off. Remove the jack cover. Remove this cover, right here, which houses a lot of our electrical connections. It just takes a screw driver, and pop the top off, and slides up and out. more
6/20/2014 9:17:17 AM
