Trailer Wiring Harness Installation - 2005 Acura MDX- Video
Today, on our 2005 Acura MDX, well be installing the Tow Ready T-One Vehicle Wiring Harness with 4-Pole Flat Connector, Part Number 118336.To begin our install, well first open up the rear hatch door and then the rear cargo compartment. Next, well need to remove the two push pin fasteners and secure the rear threshold. Using a flat blade screwdriver or an interior trim panel tool, well get underneath the fastener and just pry it out removing it from its position.Well go ahead and take our trim panel tool or flat blade screwdriver and underneath the threshold and release the fasteners underneath. Once we release these fasteners, well go ahead and pull up on the threshold and remove it.Now, with the threshold out of the way, we can see the manufacturers tool port. To access the tool port, well press on the locking tab and remove it from the cap. Next we can go ahead and remove the cap from its push pin fastened position. more
6/14/2013 2:00:12 PM
