Roadmaster Base Plate Installation - 2010 Chevrolet Traverse- Video
Today on our 2010 Chevrolet Traverse, we will be installing the Roadmaster EZ base plate kit, part number 523149-1. Now to begin our installation we will need to remove the front bumper cover, to do this we will remove the ten plastic fasteners attaching the radiator cover to the course of port fascia here on the top. Now on each side of the vehicle theres one plastic fastener attaching the weather stripping here at the back for the hood, to the cover, so well need to remove those as well. With that done we can go ahead and set the cover aside for reinstallation later. We will now remove the six 7 mm bolts attaching the radiator core to the course of port; this will loosen up the upper bumper cover. We will now move into our fender wells here where we will need to remove the 7 mm bolt and the two Phillips head screws, these are all located on the inside edge of the fender well. more
11/29/2012 9:08:31 AM
