Best 2012 Chevrolet Sonic Flat Tow Set Up - Base Plate- Video
Hey, everybody. Ryan here at etrailer. Today we're gonna be taking a look at our best flat tow setup options for your 2012 Chevrolet Sonic. So there's gonna be a total of five main components needed to flat tow your Sonic down the road. First one's going to be a base plate. And that's gonna provide us with a solid and reliable connection point. more
5/7/2021 9:52:51 AM
Roadmaster EZ4 Base Plate Kit Installation - 2012 Chevrolet Sonic- Video
Today in our 2012 Chevrolet Sonic, we're going to be installing the Roadmaster EZ4 base plate kit. Part number 523173-4. First we're going to go ahead need to remove some fasteners here on the top side of our front front fascia. There's some push fasteners, as well as some bolts that will need to be removed. The locations will be the same for over on the driver's side. Now we're going to begin here with the push fasteners ones. more
5/27/2014 10:12:04 AM
Roadmaster Tow Bar Installation - 2012 Chevrolet Sonic- Video
Today on our 2012 Chevy Sonic, well be installing the Roadmaster Falcon all terrain tow bar, part number rm-522. Well be installing this on to the Roadmaster easy two baseplate with removable arms, part number 523173-1. The first step of installing our Falcon tow bar, well be installing the quick disconnect brackets on to the removable arms of the baseplate. To do this, well take the bracket lining up the predrilled holes on the bracket with the predrilled holes on the arms. Then well take our bolt and run it through the bolt plate, through the bracket, and through the arm securing it with a flat washer, split lock washer and nut. Therell be a total of two bolts per arm, for a total of four bolts altogether.Now with all of our hardware installed finger tight, well then take the quick disconnect base and drop it into position on top of the quick disconnect brackets. more
2/8/2013 8:51:54 AM
Roadmaster Base Plate Installation - 2012 Chevrolet Sonic- Video
Today in our 2012 Chevrolet Sonic, we'll be installing the Roadmaster EZ2 Base Plate Kit with Removable Arms, part number 523173-1. Note, we've already gone ahead and raised the vehicle and removed the front tires. However, it is not necessary. It can make it easier in the removal and reassembly of the front clip. We'll remove the six pushpin fasteners and four bolts going across the top of the front of the clip underneath the hood. Next, we're going to go ahead and move underneath the vehicle, where we will remove seven Torx bit fasteners, one plastic pushpin fastener, and two bolts so that we can go ahead and disconnect the front clip from the lower fascia and remove the lower panel. more
2/8/2013 4:03:25 AM
