Bulldog Winch 500 Amp Shut-Off Switch Installation - 2018 GMC Sierra 2500- Video
Speaker 1: Today on our 2018 GMC Sierra 2500 we're gonna be taking a look at and showing you how to install the Bulldog Winch 500 Amp Shut-Off Switch with the metal housing, part number BDW20248.Here's what our cut off switch is gonna look like. Now I do want to mention that the bracket and all the cables are not included, it is just gonna be the switch. Our switch is gonna have a nice metal housing on it, so it's gonna be extra durable and the red handle is gonna make it extra easy to find even in low light situations.Now in our application we're using two, one for each battery on our truck. Now even though we're using ours in a flat tow set up to cut the batteries out these switches are idea for any heavy duty application where you need to cut the power off to whatever accessory you're sending it to such as a winch that's hooked up to your trailer or even a winch on your truck. Our switch is gonna work with a 12 or 24 volt system and it can handle up to 500 amps.Now that we've taken a look at our switches let's show you how to get them installed. To begin our installation the first thing you're gonna want to do is you're gonna want to take the negative cable off of both of your batteries. more
12/1/2017 1:52:12 PM
Roadmaster Tow Defender Protective Screening Installation - 2018 GMC Sierra 2500- Video
Speaker 1: Today on our 2018 GMC Sierra 2500 we're gonna be taking a look at and showing you how to install the Roadmaster Tow Defender Protective Screening, part number RM-4750.Here's what our Tow Defender looks like installed, it's gonna protect our Sierra from rocks, debris, and any other kind of road debris coming up while we're flat towing and going down the road. The nylon mesh is gonna allow air to flow through and keep it from bouncing up and down when we're driving down the road but also keep things from coming up and hitting our truck.Now it's gonna measure 40 inches long by 72 inches wide and it's gonna be held in place by these gas struts and support bars. The gas struts are gonna provide enough tension to keep our screen taut, but also allow enough for movement while we're going down the road. Now I do want to mention that in our application we do have a rear exiting exhaust so you don't want to idle the motor home too long with the Tow Defender in place because it can cause some warping and damage to the material.The construction of our Tow Defender, all the brackets are gonna be made out of steel with a black powder coat finish to prevent any kind of rust or corrosion on them. Now when we're not using our Tow Defender we can remove the pin and clip from each side, we can take the Tow Defender out of the bracket, and then simply roll it up to where we can store it on the back of our motor home. Then they do provide us with some straps that we can wrap around the Tow Defender and in a nice, neat package to where we can just leave it right here whenever we're ready to tow.Our Tow Defender's gonna work with all Blue Ox and Demco tow bars with the appropriate brackets as well as all Roadmaster motor home mounted tow bars. more
11/29/2017 4:17:52 PM
