BAKBox 2 Collapsible Truck Bed Toolbox Installation - 2005 GMC Sierra- Video
Today on our 2005 GMC Sierra, we're going to be installing the Bakbox 2 collapsible truck bed toolbox for the back rolex and back flip tunnel covers. Part number BAK92100. Now here's what our Bakbox 2 looks like installed. As you can see here, even with the tunnel cover completely closed, there's still plenty of room bewteen the top of the box and the bottom of your tunnel cover. Now, to fold down or collapse the box, you'll simply pull up on the hook and loop strap. I'll do it here on the other side as well. Then we'll fold the front panel down. This is one way that you can collapse the box. more
5/1/2014 9:01:10 AM
Trailer Brake Controller Installation - 2005 GMC Sierra- Video
Today, on a 2005 GMC Sierra, were going to be installing Hopkins Flex-Mount brake control, part number hm47297. In conjunction with Hopkins direct fit brake control adapter which is part number hm47795.To begin our install, were going to mount the Flex-Mount display unit here in the center console. First, well remove the center console trays and route the wire up through the pre-drilled hole in there. Well follow the 12-volt power supply back down through the console. Then, well zip tie the wire to the 12-volt power supply wires to secure it in place, cut off the excess from the zip-tie and re-install the panel.Then, well secure the Flex display in place using double sided tape. Now, to install the Flex control system were going to mount it on the side of the center console, that way its easy to access all of the different controls as well as the manual override. more
5/13/2013 10:19:22 AM
Convert-A-Ball Cushioned Weight Distribution Shank Review - 2005 GMC Sierra- Video
Today on our 2005 GMC Sierra, we'll be test fitting the Convert-A-Ball Cushion Weight Distribution Shank for 2 inch hitches, part number AMAC1.Now to begin our test fit, we'll need to get our hitch height measurement. This is the measurement from the top of the receiver tube to the ground. On our vehicle, that measurement is 20 and a half inches. Now keep in mind, that measurement can change due to hitch style, tire size, or any other accessory which may change your vehicles right height.We'll now take the shank of our ball mount, slide it into the hitch lining up the hitch pinholes. We'll then take our pin and clip, slide it through the hitch pinholes, clip it on the other side and secure our ball mount to the vehicle.Now with our ball mount secured, were going to go ahead and use Convert-A-Balls part number BA1. This will allow us to use our weight distribution shank with the standard trailer hitch ball.Now with our ball platform secured to the weight distribution shank, we'll go ahead and give you a measurement. more
4/5/2013 11:00:34 AM
Trailer Brake Controller Installation - 2005 GMC Sierra 3015-P- Video
Alright today on this 2005 GMC Sierra, we are going to install part number 90885, the Prodigy P2 brake controller and part number 3015-P, the brake controller adapter. First step that we need to do is to remove this cover for access to the port that is behind here. So we will undo this nut and pop the cover off. We will take our cord and just plug it into place. Moving on, we will reinstall the cover and then put the nut back into place. Alright next we will go ahead and install our brake controller bracket and we are going to do that on a sheet metal at the bottom of the dash here. more
12/20/2011 7:01:40 AM
