Trailer Brake Controller Installation - 2010 Ford Explorer- Video
Today on our 2010 Ford Explorer will be installing the Tekonsha Prodigy P2 Brake Controller, Part #90885 in conjunction with the etrailer Universal Installation Kit for Brake Controllers, Part #ETBC7. To start, we'll first go ahead and assemble the 7-pole adapter bracket. With the hardware provided we'll use it to attach the bracket to the 7-pole adapter. We'll go ahead and take the bracket, feed it over the wires and up to the back of the mounting surface for the 7-pole adapter. Then we'll take the screws, feed them through the front side of the 7-pole and secure it with the nuts on the backside. Once we have all four in place, we'll go ahead and tighten them down. I'm gonna go ahead and take some black electrical tape and wrap up 8 to 10 inches of our wire. This will assist in bundling our wires together and help protect it from the elements. Next we'll go ahead and attach the Draw-Tite No-Drill Mounting Bracket, Part #18136. Using the fasteners provided with the bracket we can secure it to the 7-pole bracket. Now we'll go ahead and take the purple wire, which in this application will not be used, and cut it off. more
10/21/2014 1:29:52 PM
