Trailer Brake Controller Installation - 2001 Ford Explorer- Video
Today on our 2001 Ford Explorer we'll be installing the ETBC7 seven-pole and brake controller installation kit, part number ETBC7, in conjunction with connecting the customer's already installed brake controller which is was the Tekonsha P3, part number 90195. Our first step will be installing the bracket onto our new seven-pole connector. This will be the mounting bracket that will attach to the bumper. We'll go ahead and use the hardware provided to attach the bracket to the seven-pole connector. Next I'm going to take some black electrical tape and wrap up the wires of our new seven-pole connector. This will help to assist in protecting the wires and clean up our install look. Now we're ready to go ahead and attach it to the bumper. To do this I'll use a couple of self-tapping screws to secure the bracket to the bumper. Now with our seven-pole connected, we'll go ahead and feed the wires over and behind the hitch. Next we'll go ahead and disconnect the manufacturer's seven-pole and feed it over and behind the hitch also. more
11/14/2014 2:13:09 PM
