2009 Dodge Ram Pickup Accessories and Parts Installation And Review Videos

Curt Trailer Brake Controller Wiring Adapter Installation - 2009 Dodge Ram Pickup- Video

Hello, everybody Clayton here @etrailer.com. Here at etrailer, we install, test and review a lot of different products. Tell Peter is a customer make a more educated decision before your purchase. Today we're going to be working on our 2009 Dodge Ram 1500. We're gonna be taking a look at and I'll be showing you how to install Curt custom wiring adapter for brake controllers. This is what our wired effort is gonna look like installed. more

3/18/2021 11:55:45 AM

Timbren Rear Suspension System Installation - 2009 Dodge Ram- Video

All right, today, on a Dodge 2009 Ram Pickup, we're going to install part TDR2500ca from Timbren. First thing we need to do is get access to the jounce stop. This particular application replaces it. We'll use a hitch bolt in its place. What we're going to do is take our bracket that goes to the bottom of the frame and we're going to install a spacer, and then an additional spacer, which is sold separately. This additional part number will be A25723-90AH00. more

2/27/2014 3:11:03 PM

Trailer Brake Controller Installation - 2009 Dodge Ram 1500- Video

Today we are going to install the Tekonsha Primus IQ brake controller on a 2009 Dodge Ram 1500. We will also be using the Tekonsha wire harness, part number 3020-P. The Primus IQ is a proportional style brake controller. It sense how hard or how softly you are braking in the vehicle and sends the proper voltage to the trailer brakes so the whole braking action is smooth and even. It features a digital LED display and also has three levels of boosts to increase or decrease the trailer braking power as needed. It can be mounted between 0 degrees and 70 degrees nose up. And it is covered by a limited lifetime warranty. In the packaging for the brake controller, you will find the brake controller itself, as well as a fixed black plastic mounting bracket and a black metal bracket that we will not be using. You will also find a packet of screws for attaching the bracket to the vehicle and the controller to the bracket, as well as a generic harness with loose wire ends. But since we have our custom fit harness today, we will not be using that wiring. Let us head to the vehicle. 1:13 more

8/4/2011 9:28:40 AM

Trailer Brake Controller Installation - 2009 Dodge Ram Pickup- Video

Today on this 2009 Dodge Ram we will be installing the Tekonsha P3 brake controller along with the wiring harness for it, part number 90195-3020P. The first thing I want to point out is the factory installed 7-pole at the rear of the vehicle and this will be the indicator of whether or not your vehicle is going to have the factory installed brake control port under the dash. The factory 7-pole we are looking for is built into the bumper. It will have the Chrysler logo built on the front. If you do not have this plug you will likely not have the port under the dash that we are going to be plugging into. Thus will have to hardwire your brake controller into the vehicle. 00:38 more

1/27/2010 9:10:24 AM