Trailer Brake Controller Installation - 1990 Dodge Ram Pickup- Video
Today on this 1990 Dodge Ram Pickup we are going to be installing Prodigy brake controller part number 90185 along with brake controller wiring kit part number ETBC7. We are going to start our installation back here at the rear of the vehicle and we are going to install our 7-pole at the rear first. The first thing we want to do is mount the bracket for the 7-pole. This particular vehicle has a nice large bumper that we can drill into. You just want to find a nice mounting location. Mark the holes and drill those out. I am just going to be using some self tapping screws to accomplish this. You can also drill 1/ 4 inch hole out if you like and use the provided hardware down through the bumper. Next we are going to take the 7-pole adapter from the ETBC7. Mount it on to the bracket and we are going to be doing that using the provided hardware. The next step is to merge up the 4-pole end on our 7 and 4 way adapter to the existing 4-pole that is on the vehicle. If you do not have an existing 4-pole you will need to add that on as well. However, this existing 4-pole unfortunately is not compatible with our 4-pole that we have on our adapter so what I am going to have to do is cut the ends off and wire them in direct. 01:14 more
6/4/2010 9:23:21 AM
