Trailer Brake Controller Installation - 2009 Chrysler Aspen- Video
Today on this 2009 Chrysler Aspen we are going to install part number 90885, the Prodigy P2 brake controller. We are also going to use the install kit, part number ETBC7. The first thing we are going to do is install the bracket for the ETBC7 kit. We are going to install it right next to the hitch. And we are actually going to mount the bracket backwards so we can hide the connector a little bit behind the plastic on the bumper cover. The next step is to go ahead and do some partial assembly on the 7-pole itself. What we will do is we will go ahead and add the gray cable and we will hook it up to our 7-pole connector. What we are going to do is actually just wind this up with electric tape and leave our leads out that we need. We will leave our 4-pole sticking out and we are going to need our brake wire which is going to be blue and our black wire for 12 volt power supply. And then we will just wrap up our purple and white wires. Our white wire is going to go directly to the frame for ground. And then the purple wire is going to be for reverse lights, if it is ever needed. 1:01 more
3/16/2011 1:05:46 PM
