Trailer Brake Controller Installation - 2012 Chevrolet Silverado 20127- Video
Today on our 2012 Chevrolet Silverado we're going to be doing an installation of the Tekonsha Voyager trailer brake controller. This is a one to four-axle controller and it is proportional. Part number is 39510. We're also going to be using the Tow Ready replacement brake control plug-in harness. This part number is 20127. You can see with everything hooked up, when your trailer is connected you're going to have a green light there indicating everything is fine. Now if you we're to manually input power you'll see that change. more
4/7/2015 4:51:06 PM
Reese Quick-Install Custom Fifth Wheel Base Rails Installation - 2012 Chevrolet Silverado- Video
Today on our 2012 Chevy Silverado. We'll be installing the Reese quick install custom base rails with the outpour install kit part number Rp56001-53. To begin our install, we'll first go ahead and remove the rear wheels along with the spare tire. Next we'll take the rear base rail, set it in the bed of the truck measuring from the end of the bed. Note this will not be from the end of the tailgate, from the end of the bed to the rear edge of the base rail as per the instructions. Once we have that measured out, then we'll go ahead and make sure we have the base rail centered from side to side. Now at the rear base rail in position, we'll go ahead mark the five attachment points. more
10/18/2013 2:50:48 PM
