Trailer Brake Controller Installation - 2010 Chevrolet Silverado- Video
Today on our 2010 Chevrolet Silverado well be installing the Tekonsha Voyager Brake Controller, part number 39510 in conjunction with the Tekonsha Pigtail Wiring Harness, part number 7894. The first step of our install will be locating the manufacturers wiring up underneath the dash. This will be taped to the outside of a wire loom and a white sticker color indicator wrapped around it. Our first step will be cutting these wires free and pulling the sticker so we know which color has which power feed. Now for this application well only be using four of the five wires and the orange wire will not be used so Im going to go ahead and wrap it up then wrap up some of the wires with some black electrical tape. Then well go ahead and strip back each one of the wires adding a butt connector. more
3/25/2013 6:39:13 AM
K-Source Back-Up Camera Installation - 2010 Chevrolet Silverado- Video
Today on this 2010 Chevy Silverado we're going to install part number KSVS-8. The K Source Vision System mirror replacement. To start off our install we're going to go ahead and remove the original mirror. Theres a small torqued screw underneath the base of the screw where it attaches to the windshield. We'll go ahead and remove that screw then we can go ahead and take off the mirror. We'll go ahead and disconnect the wiring that goes to the mirror. more
12/31/2012 7:08:56 AM
