Roadmaster 12 Volt Outlet Kit Installation - 2010 Honda CR-V- Video
Today on our 2010 Honda CRV we'll be taking a look at installing the 20 amp 12 volt out-leg kit, part number RM-9332. Now we have our 12 volt power ready to use whenever we need it for our auxiliary braking system for our towed vehicle. Now when we don't have any use you can put it up here in the holder or we can also place it down back underneath the back side of the stream panel making sure that it doesn't fall down while we're driving. On one end we're going to have our fuse and spade connector and on the other end we're going to have to make ground around that ring terminal there. Both of the pieces that we're going to need are going to be included in the kit. So right now we're going to find a fuse that has power going through it so we can run our constant power towards our 12 volt circuit. So go up underneath the dash and locate that fuse panel that's sitting right here right above this kick panel on the side. Now we're just going to locate a fuse, it gives us the ability to draw power when our key is not in the ignition. more
10/22/2015 3:07:31 PM
