bing tracking image

Chrysler Town and Country Hitch Bike Racks Installation And Review Videos

     

Thule Hitch Bike Racks Review - 2016 Chrysler Town and Country TH9029XT- Video

Thule  Hitch Bike Racks Review - 2016 Chrysler Town and Country TH9029XT

Today on our 2016 Chrysler Town and Country, we're doing a test fit of the Thule Vertex hanging style 4 bike rack. That part number is TH9029XT. We already have our bike on the rack. We're first going to show you how we strap that down. We have two cradles in place and then three straps altogether: two on our frame and then one as our anti-sway strap in the back. To release those we're going to pull down and lift up and we're going to save that anti-sway strap for last. Then we can just pull our bike off and set it off to the side, and with that out of the way we always want to make sure we reconnect our straps so we don't lose or damage any of them. Now we'll take a few measurements. more


Watch Video

12/8/2015 11:46:06 AM



Swagman Hitch Bike Racks Review - 2015 Chrysler Town and Country s64675- Video

Swagman  Hitch Bike Racks Review - 2015 Chrysler Town and Country s64675

Today on our 2015 Chrysler Town & Country we're taking a look at the Swagman Original towing-style 4-bike rack. Now to start with it does a great job of transporting four bikes. Uses the top plate system. It's fully lockable and really does a great job of holding the bikes in place. I wasn't so sure about it, but as soon as I tightened this knob down I could tell it really does a great job, and the reviews back that up. Each area is going to have nice small grooves designed in the kratons. You can see them here. more


Watch Video

7/16/2015 5:51:41 PM



Swagman Hitch Bike Racks Review - 2015 Chrysler Town and Country s64351- Video

Swagman  Hitch Bike Racks Review - 2015 Chrysler Town and Country s64351

Today on our 2015 Chrysler Town and Country, we're taking a look at the Swagman original tilting 3-bike rack. Now, they've designed this so we can use it with the inch and a quarter or with the two inch hitch. The part number on it is S-64351. Now, the Swagman uses a steel plate upper here. It's going to hold our bike in place really, really well. Two knobs apply pressure through our Kratons, which are lined to protect our bike's finish and also provide a great gripping surface. As you can see, our bike is really nice and solidly locked in there. All the customer reviews that I've seen are ... more


Watch Video

7/16/2015 5:51:06 PM



Kuat NV Hitch Bike Racks Review - 2015 Chrysler Town and Country- Video

Kuat NV Hitch Bike Racks Review - 2015 Chrysler Town and Country

Today on our 2015 Chrysler Town & Country, we're doing a test fit on the Kuat NV. This is a platform-style 4-bike rack. It's been designed for use in 2" hitches. Part number on it here as you see it in the black and chrome is N105-107. It's also available in my favorite, which is the gun metal gray and orange. That part number is N101-103. Now the big highlight about the NV, other than the way it looks, its durability, its quality, all those are really right up front there, but this rack does everything that a standard rack does, but it never touches the frame of the bike. more


Watch Video

7/7/2015 1:52:19 PM



SportRack Hitch Bike Racks Review - 2015 Chrysler Town and Country- Video

SportRack  Hitch Bike Racks Review - 2015 Chrysler Town and Country

Today on our 2015 Chrysler Town & Country, we're test fitting the SportRack Ridge Swing. This is a swing-away-style folding 4-bike rack. It's been designed for use in 2" hitches. Part number on it is SR2415. Now first and foremost, the swing-away feature is what everybody wants to see. Basically we come right down here and we're going to loosen the black t-handle. more


Watch Video

7/7/2015 1:51:06 PM



Softride Element Parallelogram Hitch Bike Racks Review - 2015 Chrysler Town and Country- Video

Softride Element Parallelogram Hitch Bike Racks Review - 2015 Chrysler Town and Country

Today on our 2015 Chrysler Town & Country we're taking a look at the Softride Element Parallelogram. This is a folding and tilting removable-arm 4-bike rack. It's been designed for use with 2" hitches or 1-1/4" hitches. Part number on it is SR26248. Now one of the cool things I really like about the rack, got a black t-handle located on the right side or passenger side. We pull out on that, we're going to be able to tilt this down and away from our vehicle. Check the hatch here. more


Watch Video

7/6/2015 6:01:22 PM



Swagman Hitch Bike Racks Review - 2015 Chrysler Town and Country S64684- Video

Swagman  Hitch Bike Racks Review - 2015 Chrysler Town and Country S64684

Today on our 2015 Chrysler Town & Country we're doing a test fit on the Swagman Dispatch. The Dispatch is a platform-style 2-bike rack designed for use in 2" hitches. Part number on it is S64684. Now a few details about the rack. Very nice heavy dutily continued rack. We've got fully adjustable wheel cradles front and rear so it's going to handle a wide variety of bike lengths. more


Watch Video

7/6/2015 6:01:06 PM



Hollywood Racks Traveler Tow n Go Hitch Bike Racks Review - 2015 Chrysler Town and Country- Video

Hollywood Racks Traveler Tow n Go Hitch Bike Racks Review - 2015 Chrysler Town and Country

Today we're taking a look at the Hollywood Racks Traveler Tow 'n Go. We've got it on our 2015 Chrysler Town & Country and we're going to go over a test fit of it, just see how it shapes up. To start with, what we've got here is a bike rack that's designed to mount right onto a 2" ball mount. Really convenient. We've got the Hidden Hitch. This is the super extra long, part number 80232, that we're using today. more


Watch Video

7/6/2015 5:57:05 PM



Thule Hitch Bike Racks Review - 2014 Chrysler Town and Country th9031xt- Video

Thule  Hitch Bike Racks Review - 2014 Chrysler Town and Country th9031xt

Today on our 2014 Chrysler Town & Country we're going to be doing a test fit on the Thule Vertex Swing. This is a swing-away-style 4-bike rack. It's been designed for use in 2" hitches. The part number on it is TH9031XT. Now first and foremost, the best feature about the racks is its ability to give us complete, unobstructed access to our rear cargo area. To do that we're going to turn our black t-handle located right down here at the base. more


Watch Video

5/27/2015 12:38:09 PM



Swagman Hitch Bike Racks Review - 2014 Chrysler Town and Country s64684- Video

Swagman  Hitch Bike Racks Review - 2014 Chrysler Town and Country s64684

Today on our 2014 Chrysler Town & Country we're taking a look at the Swagman Dispatch. This is a platform-style 2-bike rack. They've designed it for use in 2" hitches. The part number on it is S64684. Now we've got two wheel cradles and straps that are going to secure the lower part of our bike, and a frame hook for the top. Frame hook has a padded cover to it, as well as the wheel straps. more


Watch Video

5/27/2015 12:37:14 PM



Inno Hitch Bike Racks Review - 2014 Chrysler Town and Country- Video

Inno  Hitch Bike Racks Review - 2014 Chrysler Town and Country

Today on our 2014 Chrysler Town and Country, we are doing a test on the ENO tire holder. This is a folding and tilting three bikes rack. They designed it for use with inch and a quarter or two inch hitch. Part number on it in this configuration is INH305-306. That's gives us our INH305 and the 106 add a slot making it a three bike rack. Very nice, heavy duty rack, hold or bike in place just by the tires. more


Watch Video

5/27/2015 12:36:21 PM



Thule Hitch Bike Racks Review - 2014 Chrysler Town and Country TH9029XT- Video

Thule  Hitch Bike Racks Review - 2014 Chrysler Town and Country TH9029XT

Today on our 2014 Chrysler Town and Country, we're going to be taking a look and doing a test fit on the Thule Vertex. This is a folding and tilting four bike rack. They've designed this so we can use it with the inch and a quarter or with the two inch hitch, part number on it is TH9029. Something that is nice about the rack we're going to have a lock designed in with cables right here in the front comes right back here to the back where we're going to be able to secure that using the Thule one key lock system so we can secure just the one lock or if you have numerous Thule products, they can all be keyed the same. When not in use, its got a convenient storage area here, keeps it tucked down in the mast out of the way until we need it. Now as far as bike security, we've got two straps here on the top holding it in place, we've got a third one here on the back that's for our anti sway cradle. That does a good job of keeping the bikes in their position and it will prevent them coming up making contact with the mast or maybe our other bikes. Now to free our bike up, we're just going to remove the three straps, we get that out of the way and you can take a good look at those cradles that we've got in there. more


Watch Video

5/27/2015 12:25:29 PM



Kuat NV Hitch Bike Racks Review - 2014 Chrysler Town and Country- Video

Kuat NV Hitch Bike Racks Review - 2014 Chrysler Town and Country

Today on our 2014 Chrysler Town & Country we're going to be taking a look at the Kuat NV 4-bike platform-style rack. This is a folding and tilting rack. They've designed it for use with 2" hitches. The part number, as you see it here in the black and chrome, is N105-107. We also have a good looking gun metal gray and orange; that's part number N101-103. Really cool thing about the rack is going to be it's ability to tilt away from the vehicle even when we've got a bike loaded. There's a chrome lever that's located here on the right side. more


Watch Video

5/27/2015 11:16:38 AM



Curt Hitch Bike Racks Review - 2013 Chrysler Town and Country- Video

Curt  Hitch Bike Racks Review - 2013 Chrysler Town and Country

Today on our 2013 Chrysler Town and Country, we're going to be doing a test fit of the Curt Premium 4. This is going to be your hanging-style for a bike rack. It's going to be Part #C18064. This comes with your 2 inch shank for your 2 inch hitches only. And it is a nice tilting model. As you can see, we've already got a bike on here, so you can see what it would look like and how it would fit, once it's all complete. We're going to start off by getting a few measurements, that way you know where your tolerances are for your vehicle. more


Watch Video

5/18/2015 8:28:11 AM



Yakima FullTilt Hitch Bike Racks Review - 2015 Chrysler Town and Country- Video

Yakima FullTilt Hitch Bike Racks Review - 2015 Chrysler Town and Country

Today on our 2015 Chrysler Town and Country, we'll be test fitting the Yakima Full Tilt 4 Bike Rack, that's part number Y02462. Now this can be used for either 1 1/4 or 2 inch hitches. We've got our adapter on there for our 2 inch here today. We can go ahead and begin by inserting our shank into our receiver. All right we want this to clip in where our pin holes line up and make a nice little snap into place sound just like that and we'll come back here to our anti rattle device, we'll start tightening that down and what is that going to do is it's going to help reduce the play and the rattle within our hitch and our bike rack. We'll get that nice and tight, give that a quick shake and then we can take a few measurements. Starting with our nearest point is going to be from here to our bumper and that's about 4 inches away. more


Watch Video

2/6/2015 10:43:36 AM



Swagman Titan Hitch Bike Racks Review - 2015 Chrysler Town and Country- Video

Swagman Titan Hitch Bike Racks Review - 2015 Chrysler Town and Country

Today on our 2015 Chrysler Town & Country we will be test fitting the Swagman Titan tilting 4-bike rack. That's part number S63410. Now this can be used for either 1-1/4" or 2" hitches. We've got our little adapter here for our 2" hitch here today. We can go ahead and begin by inserting our shank into our receiver until our pinholes line up. Once we get that lined up we'll go ahead and take our included anti-rattle bolt, thread that through. more


Watch Video

2/6/2015 10:41:36 AM



SportRack Hitch Bike Racks Review - 2015 Chrysler Town and Country sr2902- Video

SportRack  Hitch Bike Racks Review - 2015 Chrysler Town and Country sr2902

Today on our 2015 Chrysler Town and Country, we'll be test fitting the SportRack platform style four bike rack. That's part #SR2902. This is meant for 2" hitches. We can go ahead and begin by inserting our shank into our receiver, line up our pin holes. Once we get that lined up, we'll go ahead and take our included anti-rattle bolt, thread that through. Once we get that hand-tightened, we'll tighten it down with our socket wrench. The nice thing about this anti-rattle bolt it's going to help reduce the play and the rattle within our hitch in our bike rack. more


Watch Video

2/6/2015 10:40:09 AM



SportRack Hitch Bike Racks Review - 2015 Chrysler Town and Country sr2403- Video

SportRack  Hitch Bike Racks Review - 2015 Chrysler Town and Country sr2403

Today on our 2015 Chrysler Town & Country we will be test fitting the Sport Rack tilting 3-bike rack. That's part number SR2403. This can be used for either 1-1/4" or 2" hitches. We've got a 2" hitch here today so we can go ahead and begin by inserting our shank into our receiver. We'll line up our pinholes. That looks pretty good. more


Watch Video

2/6/2015 10:39:09 AM



Saris Thelma Hitch Bike Racks Review - 2015 Chrysler Town and Country- Video

Saris Thelma Hitch Bike Racks Review - 2015 Chrysler Town and Country

Today on our 2015 Chrysler Town and Country, we'll be test fitting the Saris Thelma Platform Style 3 Bike Rack, that's part number SA4239B. This can be used for either 1 1/4 or 2 inch hitches. We've got a 2 inch hitch here today. We can go ahead and begin by inserting our shank into our receiver, we'll line up our pin holes. All right then we'll take our included anti rattle bolt, go ahead and thread that through and we'll tighten that the rest of the way down with our socket wrench. The nice thing about this anti rattle bolt is it's going to help reduce the rattle and play within our hitch and our bike rack as you can see there. more


Watch Video

2/6/2015 10:36:50 AM



Pro Series Hitch Bike Racks Review - 2015 Chrysler Town and Country- Video

Pro Series  Hitch Bike Racks Review - 2015 Chrysler Town and Country

Today on our 2015 Chrysler Town and Country, we'll be test fitting the Pro Series Q Slot Platform Style 2 Bike Rack and 4 Bike Rack, that's part number PS63138. Now this is meant for 2 inches, we got a 2 inch hitch here today, we can go ahead and begin by inserting our shank into our receiver, we'll line up our pin holes, that looks pretty good, we'll then take our included anti rattle bolt, going to thread that through, and we'll tighten that the rest of the way down with our socket wrench. Nice thing about this anti rattle bolt is it's going to help reduce the play and the rattle within our hitch and our bike rack if you could see there. We'll come around here, I'll put our clip in place and we can take a few measurements. Starting with our nearest point it's going to be from here to our bumper about, I'd say about 2 inches away. Overall to our vehicle for our 4 bike platform style we've added about 42 inches. Now if we we're to remove that and make it a 2 bike platform style our overall length would be about 24 inches right here. more


Watch Video

2/6/2015 10:28:02 AM



Saris Bike Porter Hitch Bike Racks Review - 2015 Chrysler Town and Country- Video

Saris Bike Porter Hitch Bike Racks Review - 2015 Chrysler Town and Country

Today on our 2015 Chrysler Town & Country we will be test fitting the Saris Bike Porter tilting 4-bike rack. That's part number SA404B. This can be used for either 1-1/4" or 2" hitches. We've got our little adapter here for our 2" hitch here today. We can go ahead and begin by inserting our shank into our receiver. We'll line up our pinholes. more


Watch Video

2/3/2015 4:44:02 PM



Swagman Hitch Bike Racks Review - 2015 Chrysler Town and Country s63380- Video

Swagman  Hitch Bike Racks Review - 2015 Chrysler Town and Country s63380

Today on our 2015 Chrysler Town and Country, we'll be test fitting the Swagman Trailhead Tilting 4 Bike Rack, that's part number S63380. This bike rack can be either used for either 1 1/4 or 2 inch hitches. We've got our adapter here for our 2 inch hitch. We can go ahead and begin by inserting our shank into our receiver. Next thing we want to do is line up our pin holes, and once we got that lined up, we'll go ahead and take our included anti rattle bolt and thread that through and we will take our socket wrench and tighten that the rest of the way down. The nice thing about this anti rattle bolt this is going to help reduce the play and the rattle within our hitch and our bike rack. more


Watch Video

2/3/2015 4:38:10 PM



Hollywood Racks Traveler Hitch Bike Racks Review - 2015 Chrysler Town and Country- Video

Hollywood Racks Traveler Hitch Bike Racks Review - 2015 Chrysler Town and Country

Today on our 2015 Chrysler Town and Country, we'll be test fitting the Hollywood Racks Traveler Tilting 5 Bike Rack, that's part number HR9200. This is used for 2 inch hitches, we've got a 2 inch hitch here today. We can go ahead and begin by inserting our shank into our receiver. We'll line up our pin holes, that looks pretty good and we'll take our included anti rattle bolt, thread that through. Once we've got that threaded through, we'll go ahead and tighten that down with our socket wrench. The nice thing about this anti rattle bolt it's going to help reduce the play and the rattle within our hitch and our bike rack as you can see there. more


Watch Video

2/3/2015 4:34:45 PM



Hollywood Racks Traveler Hitch Bike Racks Review - 2015 Chrysler Town and Country hr8500- Video

Hollywood Racks Traveler Hitch Bike Racks Review - 2015 Chrysler Town and Country hr8500

Today on our 2015 Chrysler Town & Country we will be test fitting the Hollywood Racks Traveler tilting 4-bike rack. That's part number HR8500. This can be used for either 1-1/4" or 2" hitches. We've got our adapter here for our 2" hitch here today. We can go ahead and begin by inserting our shank into our receiver. Next thing we want to do is line up our pinholes. more


Watch Video

2/3/2015 4:34:13 PM



Thule Hitch Bike Racks Review - 2015 Chrysler Town and Country th9031xt- Video

Thule  Hitch Bike Racks Review - 2015 Chrysler Town and Country th9031xt

Today on our 2015 Chrysler Town & Country, we will be test-fitting the Thule Vertex Swing 4-Bike Rack. That's part number TH9031XT. It can be used for 2" hitches. We got a 2" hitch here today. We can go ahead and begin by inserting our shank into our receiver. We'll line our pinholes up. more


Watch Video

2/3/2015 12:12:15 PM



Thule Hitch Bike Racks Review - 2015 Chrysler Town and Country th9029xt- Video

Thule  Hitch Bike Racks Review - 2015 Chrysler Town and Country th9029xt

Today on our 2015 Chrysler Town & Country we will be test fitting the Thule Vertex 4 tilting 4-bike rack. That's part number TH9029XT. Now this can be used for an 1-1/4" or 2" hitches. We've got our adapter here for our 2" hitch here today so we can go ahead and begin by inserting our shank into our receiver. We'll line our pinholes up. Once we get that lined up we'll go ahead and take our included anti-rattle bolt and thread that through. more


Watch Video

2/3/2015 9:32:27 AM



Thule Hitch Bike Racks Review - 2015 Chrysler Town and Country th9028xt- Video

Thule  Hitch Bike Racks Review - 2015 Chrysler Town and Country th9028xt

Today on our 2015 Chrysler Town & Country we will be test fitting the Thule Vertex 2 tilting 2-bike rack. That's part number TH9028XT. This can be used for either 1-1/4" or 2" hitches. We've got a 2" hitch today so we've got our adapter on. We can go ahead and begin by inserting our shank into our receiver. We'll line up our pinholes. more


Watch Video

2/3/2015 9:19:03 AM



Thule Hitch Bike Racks Review - 2015 Chrysler Town and Country th9030xt- Video

Thule  Hitch Bike Racks Review - 2015 Chrysler Town and Country th9030xt

Today on our 2015 Chrysler Town & Country we will be test fitting the Thule Vertex 5 tilting 5-bike rack. That's part number TH9030XT. This is for 2" hitches so we can go ahead and begin by inserting our shank into our receiver. We'll line our pinholes up. That looks pretty good. Then we'll take our anti-rattle bolt, go ahead and thread that through. more


Watch Video

1/30/2015 9:26:23 AM



Saris Freedom Hitch Bike Racks Review - 2015 Chrysler Town and Country- Video

Saris Freedom Hitch Bike Racks Review - 2015 Chrysler Town and Country

Today on our 2015 Chrysler Town and Country, we will be test fitting the Saris Freedom Platform Style 4 Bike Rack, that's part number SA44145B. This can be used for 2 inch hitches, we can go ahead and insert our shank into our receiver, we'll line our pin holes up, and we've get those lined up, we'll go ahead and take our included anti rattle bolt, go ahead and thread that through, once we get that hand tightened, we'll go ahead and tighten that the rest of the way down with our socket wrench. The nice thing about this anti rattle bolt is it's going to help reduce the play and the rattle within our hitch and our bike rack as you can see there. We'll go ahead and put our clip in place and we'll take a few measurements. Starting with our nearest point its like it's going to be from here to our bumper and that's going to be right about 2 inches away from there to there. Overall we've added 17 1/2 inches to our vehicle and for our ground clearance we are looking at about 13 1/2 inches. All right we can go ahead and lower this down, we came up here to this gray handle, go ahead and pull it out like that, lower it down until it snaps into place, just like that and by doing that, our nearest point is now about 6 1/2 inches from here to our bumper. more


Watch Video

1/30/2015 9:19:12 AM



Saris Freedom SuperClamp Hitch Bike Racks Review - 2015 Chrysler Town and Country- Video

Saris Freedom SuperClamp Hitch Bike Racks Review - 2015 Chrysler Town and Country

Today on our 2015 Chrysler Town and Country, we'll be test fitting the Saris Freedom Super Clamp Platform Style 2 Bike Rack, that's part number SA4025. This can be used for either 1 1/4 or 2 inch hitches. We've got a 2 inch hitch here today, we can go ahead and begin by inserting our shank into our receiver. We'll line up our pin holes. Once we get that lined up, we'll go ahead and take our included anti rattle bolt and lock and thread that through and once we get that hand tightened, we'll finish tightening that down with our socket wrench. Nice thing about this anti rattle bolt it's going to help reduce the play and the rattle within our bike rack and our hitch. more


Watch Video

1/28/2015 6:23:27 PM



Saris Thelma Hitch Bike Racks Review - 2014 Chrysler Town and Country- Video

Saris Thelma Hitch Bike Racks Review - 2014 Chrysler Town and Country

Today on our 2014 Chrysler Town & Country we're going to be test fitting the Saris Thelma. This is a platform-style tilting 3-bike rack. They've designed it for use with either the 1-1/4" or 2" hitches. The part number is SA4239B. Now to begin our test fit we're going to slide the shank of the rack right up into the receiver tube of our hitch. We want to slide it in far enough so we have our threaded hole lined up with our hitch pinhole. With those in line we'll take our anti-rattle bolt, we'll slide that in and begin threading it down by hand. more


Watch Video

10/22/2014 3:43:38 PM



Softride Element Parallelogram Hitch Bike Racks Review - 2014 Chrysler Town and Country- Video

Softride Element Parallelogram Hitch Bike Racks Review - 2014 Chrysler Town and Country

Today on our 2014 Chrysler Town and Country, we're going to be test fitting the Softride Element Parallelogram. This is a tilting style bike rack. It's got folding cradle arms. The part number on it is SR26248. Now, they've designed this for use on the 2-inch hitch. To begin our test fit, we're simply going to slide the shank of the rack right into the receiver tube of the hitch. more


Watch Video

7/23/2014 5:07:51 PM



Saris Freedom SuperClamp Hitch Bike Racks Review - 2014 Chrysler Town and Country- Video

Saris Freedom SuperClamp Hitch Bike Racks Review - 2014 Chrysler Town and Country

Today on our 2014 Chrysler Town & country we're going to be test fitting the Saris Freedom Superclamp. This is a platform-style 2-bike rack. It's been designed for use in the 1-1/4" or 2" hitches. Part number on it is SA4025. Now to begin our test fit we're going to slide the shank of the rack right into the receiver tube of our hitch. We'll line our threaded pinhole up with our hitch pinhole. more


Watch Video

7/23/2014 5:01:59 PM



Saris Freedom Hitch Bike Racks Review - 2014 Chrysler Town and Country- Video

Saris Freedom Hitch Bike Racks Review - 2014 Chrysler Town and Country

Today on our 2014 Chrysler Town & Country we're going to be frustrating the Saris Freedom. Now this is a folding and tilting platform-style 4-bike rack. They've designed it for use in the 2" hitches. Its part number is SA4414B. Now to begin our test fit we'll slide the shank of the rack right into the receiver tube of our hitch. Now we want to get our threaded hole here lined up with our hitch pinhole. more


Watch Video

7/23/2014 4:59:19 PM



Saris Bike Porter Hitch Bike Racks Review - 2014 Chrysler Town and Country- Video

Saris Bike Porter Hitch Bike Racks Review - 2014 Chrysler Town and Country

Today on our 2014 Chrysler Town & Country we're going to be test fitting the Saris Bike Porter. This is a folding and tilting 4-bike rack. It's been designed for use with the 1-1/4" or 2" hitches. Its part number is SA404B. Now we also have this in a 2-bike configuration; that part number is SA402B. To begin our test fit we're going to slide the shank of the rack right into the receiver tube of our hitch. As we slide it in we want to line up our threaded pinhole with our hitch pinhole. more


Watch Video

7/23/2014 4:57:00 PM



Saris Axis Hitch Bike Racks Review - 2014 Chrysler Town and Country- Video

Saris Axis Hitch Bike Racks Review - 2014 Chrysler Town and Country

Today on our 2014 Chrysler Town & Country we're going to be test fitting the Saris Axis. This is a folding and tilting 3-bike rack. They've designed it for use with the 1-1/4" or 2" hitches. Part number is SA843B. Now to begin our test fit we're going to slid the shank of the rack right into the receiver tube of our hitch. As we do this we need to line our threaded hole up with our hitch pinhole, then slide in our anti-rattle bolt. more


Watch Video

7/23/2014 4:54:39 PM



Saris Freedom Hitch Bike Racks Review - 2013 Chrysler Town and Country- Video

Saris Freedom Hitch Bike Racks Review - 2013 Chrysler Town and Country

Today on our 2013 Chrysler Town and Country, we're going to be test fitting the Saris Freedom, 4-bike platform style rack for 2-inch hitches, part number SA4414B. We'll begin our test fit by inserting the shank of the rack into the hitch on our vehicle. You'll want to watch for the hitch pinholes to line up. With those in line, we'll take the threaded anti-rattle hitch bolt and thread that into place. We'll go ahead and get this hand tight and then we can finish it off with our wrench. Tightening this down will help take any extra play out off the rack helping to eliminate movement overall going down the road. more


Watch Video

7/7/2014 9:32:55 AM



Saris Freedom SuperClamp Hitch Bike Racks Review - 2013 Chrysler Town and Country- Video

Saris Freedom SuperClamp Hitch Bike Racks Review - 2013 Chrysler Town and Country

Today on our 2013 Chrysler Town & Country, we're going to be test fitting the Saris Freedom super clamp, two bike platform style rack, part number Sa4025. We'll begin our test fit by inserting the shank of the rack into the hitch on our town and country. You'll want to watch for the hitch pin holes to line up. With those in line we can take the provided hitch pin lock and thread that into place. Go ahead and get that hand tight and then we can finish it off with our wrench.Tightening this down will help take any extra play out of the shank of the rack, helping to eliminate movement while going down the road. With that tightened down, we'll snap our lock on to the other side, then turn it to the lock position, that way it snaps on. more


Watch Video

7/3/2014 5:08:40 PM



Saris Axis Hitch Bike Racks Review - 2013 Chrysler Town and Country- Video

Saris Axis Hitch Bike Racks Review - 2013 Chrysler Town and Country

Today on our 2013 Chrysler Town and Country, we're going to be test fitting the Saris Axis 3-bike rack for inch and a quarter and two inch hitches. Part number SA843B. We'll begin our test fit by inserting the shank of the rack into the hitch on our vehicle. We'll want to watch for the hitch pin holes to line up. With those in line we can insert the included anti-rattle hitch lock. We'll go ahead and thread that down hand tight. Once we have that hand tight we can finish it off with our wrench. more


Watch Video

7/3/2014 4:50:27 PM



Yakima FullTilt 4 Bike Rack Review - 2013 Chrysler Town and Country- Video

Yakima FullTilt 4 Bike Rack Review - 2013 Chrysler Town and Country

Today on our 2013 Chrysler Town and Country we're going to be test fitting the Yakima FullTilt 4 Bike Rack for 1-1/4- and 2-inch hitches, part #Y02462. We'll begin our test fit by inserting the shank of our rack into the hitch on our Town and Country. You may want to keep a hand on the anti-rattle device to make sure it slides in without binding up. You'll notice the self-locking hitch pin. We'll go ahead and just push that in until it goes into the appropriate hole. We can then tighten the anti-rattle device here at the base of the rack. more


Watch Video

7/3/2014 7:10:02 AM



Saris Porter 4 Bike Rack Review - 2013 Chrysler Town and Country- Video

Saris Porter 4 Bike Rack Review - 2013 Chrysler Town and Country

Today on our 2013 Chrysler Town and Country we're going to be test fitting the Saris Bike Porter four bike rack for inch and a quarter and two inch hitches part number SA404B. We'll begin our test fit by inserting the shank of the rack into the hitch on our Town and Country. You'll want to watch for the hitch pinhole to line up. With that in mind we'll go ahead and take the included threaded anti-rattle hitch bolt and thread that into place. We'll go ahead and get that hand-tight and then we can finish it off with our wrench. Tightening this down helps to take the extra play out of the shank of the rack, which helps to eliminate movement overall as you're going down the road. We'll attach our clip to the other side and grab a few measurements. The closest point of the rack to the vehicle is going to be here at the back of the mast. That measures about five and a half inches. more


Watch Video

7/3/2014 6:51:24 AM



Thule Hitching Post Pro Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Thule Hitching Post Pro Hitch Bike Rack Review - 2011 Chrysler Town and Country

Today on our 2011 Chrysler Town & Country, we'll be test fitting the Thule Hitching Post Pro, part number TH934XTR. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti-rattle bolt and tighten it with a wrench. With the bike rack secured, we'll go over a few clearance measurements and see how the two fit together. We have about 13 inches of ground clearance at the rear of the bike rack. Closest part of the bike rack to the closest part of the vehicle is about 6 inches, and with the cradle arms folded down, we've added about 15 inches to the overall length of our Chrysler Town & Country. We can now pull the gold pin at the top of the mast to swing the cradle arms out. With the cradles arms out, we've added about 35 inches to the overall length of our vehicle. To access the cargo area, we can pull the gold pin at the base of the bike rack and tilt the mast down. more


Watch Video

5/20/2014 11:21:58 AM



Thule Apex 4 Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Thule Apex 4 Hitch Bike Rack Review - 2011 Chrysler Town and Country

Today on our 2011 Chrysler Town and Country, well be test fitting the Thule Apex Hitch Mounted Four Bike Rack, part number TH9025. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well allow the integrated hitch pin to fall into place, and well then turn the black knob to engage the anti-rattle device. With the bike rack secured, well go over a few clearance of measurements to see how the two fit together. We have about 13-1/2 inches of ground clearance at the rear of the bike rack. The closest part of the bike rack to the closest part of the vehicle is about 1 inch away. more


Watch Video

5/14/2014 9:33:09 AM



Hollywood Racks Traveler Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Hollywood Racks Traveler Hitch Bike Rack Review - 2011 Chrysler Town and Country

Today on our 2011 Chrysler Town & Country we'll be test fitting the Hollywood Racks Traveler Hitch Mounted 4 Bike Rack, part number HR8500. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch, threading in our anti-rattle bolt, and tighten it with a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about 10-1/2" of ground clearance at the rear of the bike rack. Closest part of the vehicle to the closest part of our Town & Country is about 2" away, and we've added about 8" to the overall length of our vehicle with the cradle arms pointing down. We can now pull the black pin at the top of the mast to swing the cradle arms out. With the cradle arms out we've added about 31" to the overall length of our Chrysler. To access the rear hatch we can pull the pin at the base of the bike rack and tilt the mast down. more


Watch Video

5/14/2014 9:31:02 AM



Yakima StickUp 2 Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Yakima StickUp 2 Hitch Bike Rack Review - 2011 Chrysler Town and Country

Today on our 2011 Chrysler Town and Country, we'll be test fitting the Yakima Stickup hitch mounted two bike rack part number Y02420. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti rattle bolt and tighten it with the wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. With the bike rack folded up, we have about fourteen and a half inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about three and a half inches away and we've added about eleven and a half inches to the overall length of our Town and Country. To lower the platform, we can pull the red pin at the base of the bike rack and tilt it down. With the platform folded down, we have about eighteen inches of ground clearance at the rear of the bike rack. more


Watch Video

5/12/2014 3:27:53 PM



Thule Vertex 4 Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Thule Vertex 4 Hitch Bike Rack Review - 2011 Chrysler Town and Country

Today on our 2011 Chrysler Town and County, we'll be test fitting the Thule Vertex hitch mounted for bike rack part number Th9029. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll thread in our anti rattle bolt and tighten it with a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about thirteen inches of ground clearance to the rear of the bike rack. Closest part of the bike rack to the closest part of the vehicle is about three inches away and we've added about ten inches to the overall length of our Chrysler Town and Country. We can now pull the gray lever at the top of the mast to swing the cradle arms out and with the cradle arms out we've added about thirty four inches to the overall length of our Town and Country. To access the cargo area, we can pull the gray lever at the base of the bike rack and tilt the mast down. more


Watch Video

5/12/2014 3:26:04 PM



Thule Helium Aero Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Thule Helium Aero Hitch Bike Rack Review - 2011 Chrysler Town and Country

Today on our 2011 Chrysler Town and Country, we'll be test fitting the Thule Helium Aero hitch mounted two bike rack part number Th9042. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll allow the integrated hitch pin to fall into place and we'll then turn the black knob to engage the anti rattle device. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about seventeen and one quarter inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about an inch and a quarter. With the cradle arms pointing down, we've added about sixteen inches to the overall length of our vehicle. We can now pull the gray lever at the top of the mast to swing the cradle arms out and with the cradle arms folded out, we've added about twenty four and a half inches to the overall length of our Town and Country. To access the rear hatch we can pull the gray lever at the base of the bike rack and tilt the mast down. more


Watch Video

5/12/2014 3:25:04 PM



Thule Apex 4 Swing Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Thule Apex 4 Swing Hitch Bike Rack Review - 2011 Chrysler Town and Country

Today on our 2011 Chrysler Town and Country well be test fitting the Thule Apex Swing hitch mounted four bike rack, part number TH9027. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. Well allow the integrated hitch pin to fall into place, and well turn the black knob to engage the anti-rattle device. With the bike rack secured well go ahead and go over a few clearance measurements to see how the two fit together. We have about 12 inches of ground clearance at the rear of the bike rack. The closest part of the bike rack to the closest part of the vehicle is about one inch away. more


Watch Video

5/12/2014 3:23:42 PM



Prorack 4 Hitch Bike Rack Review - 2011 Chrysler Town and Country- Video

Prorack 4 Hitch Bike Rack Review - 2011 Chrysler Town and Country

Today on our 2011 Chrysler Town and Country we'll be test fitting the Pro Rack hitch mounter four bike rack part number Pr8062404. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll line up our pin holes, thread our anti rattle bolt through the pinholes and tighten it with a wrench. With the bike rack secured, we'll go over a few clearance measurements to see how the two fit together. We have about ten inches of ground clearance. Closest part of the bike rack to the closest part of the vehicle is about four inches away and we've added about twenty eight and a half inches to the overall length of our Town and Country. To access the cargo area, we can pull the silver pin at the base of the bike rack and tilt the mast down. more


Watch Video

5/9/2014 11:12:39 AM



Hollywood Racks Traveler Tow n Go Bike Rack Review - 2011 Chrysler Town and Country- Video

Hollywood Racks Traveler Tow n Go Bike Rack Review - 2011 Chrysler Town and Country

Today on our 2011 Chrysler Town & Country we'll be test fitting the Hollywood Racks Traveler Tow N' Go 3 bike rack, part number HR135. With this test fit we'll be using the Hidden Hitch Super Extra Long Ball Mount, part number 80232. We'll begin our test fit by sliding the shank of the ball mount into the opening of the hitch and securing with a pin and clip, which is also sold separately. To load a bike we'll undo the black pin at the top of the mast and swing out our dual arms. We'll undo the cradle straps, place our bike into the frame cradles, and secure it with the straps. Keep in mind, this bike rack will not allow you to access the rear hatch. Now we'll take the rack out on our slalom course to show you the side to side movement. Then we'll go to our alternating bumps and then to our straight bumps to show you the up and down as well as the side to side movement. That will complete today's test fit for the Hollywood Racks Traveler Tow N' Go, part number HR135, on our 2011 Chrysler Town & Country. more


Watch Video

5/9/2014 11:09:44 AM



  2     3