Hollywood Racks Hitch Cargo Carrier Review - 2015 Subaru Forester- Video

Today on our 2015 Subaru Forester, we are going to be doing a test fit on the Hollywood Racks 151/2x50 cargo carrier. They've designed this for use in two inch hitches and it has a 220 pound weight capacity. Part number on it is HR1485. Now this can also easily be added to the rear of the Hollywood racks sport rider SE or SE2 models. When using it in conjunction with your bike rack, you will be limited to a 90 pound capacity, just keep that in mind. Now to begin our test fit, we'll slide the shank of the carrier right into the receiver tube of our hitch. As we do this, we'll line up the pin hole with our hitch pin hole, easier said that done I suppose. more

Watch Video

10/6/2014 11:42:47 AM

Pro Series Hitch Cargo Carrier Review - 2014 Subaru Outback Wagon- Video

Today on our 2014 Subaru Outback, we're going to be test fitting the 31 by 47 Pro Series Solo Cargo Carrier. This has been designed for use with 2 inch hitches and it offers a 400 pound weight capacity. Its part number is PS1040100. To begin our test fit, we need to slide the shank of the carrier into the receiver tube of our hitch. It's one of the larger carriers that we have, so using 2 people to install it is helpful. A way I've adopted of installing it, just with 1 person, is to stick the shank into the receiver tube, then pick up on the rear as you push in, and that should help you get it up in there where you need it if you're doing it by yourself. We then need to line up our pin holes. We'll then take a standard 5/8ths pin and slide that through. more

Watch Video

9/25/2014 12:25:26 PM

Pro Series Hitch Cargo Carrier Review - 2013 Subaru Outback Wagon- Video

Today on our 2013 Subaru Outback we're going to be test fitting the 31 by 37 Pro Series Solo cargo carrier. This is designed for use in a 2" hitch. It has a 450 pound weight capacity. Its part number is PS1040100. To begin our test fit we're going to slide the shank of the carrier into the receiver tube of our hitch. Now it's a larger carrier. more

Watch Video

9/24/2014 7:26:21 PM

Rola Dart Hitch Cargo Carrier Review - 2015 Subaru Forester- Video

Rate your transcript OrderClientKevin BrossRef #20573Order #TC0622248399 Today on our 2015 Subaru Forester, we are going to do a test fit on the 23 by 56 Rola Dart. This folding cargo carrier has been designed for use with two inch hitches and it offers a 450 weight capacity. Part number on it is 59550. To begin our test fit, we are going to slide the shank of the carrier right into the receiver tube of our hitch. As we do we want to keep an eye on our threaded hole to see when that lines up with our hitch pinhole. We'll then take our anti rattle bolt and thread that in. With that threaded in, you can see we still got some play in the connection point. more

Watch Video

8/14/2014 4:00:52 PM

Pro Series Hitch Cargo Carrier Review - 2015 Subaru Forester- Video

Today on our 2015 Subaru Forester, we're going to do a test fit on the Pro Series Solo 31x47 Cargo Carrier. They designed this for use in 2" hitches. It offers a 400 pound weight capacity. The part number on it is PS1040100. This is one of the larger cargo carriers that we offer. If you don't have a friend to help you, it's probably the best way to get it on your vehicle. I've adopted a little technique. more

Watch Video

8/14/2014 3:55:20 PM

MaxxTow Hitch Cargo Carrier Review - 2015 Subaru Forester MT70275- Video

Today on our 2015 Subaru Forester we're going to do a test fit on the 29 x 49 MaxxTow cargo carrier. This has the sixty inch bi-fold ramp. It's designed for use in two inch hitches and offers a five hundred pound weigh capacity. The part number is MT70275. To begin our test fit, we need to slide the shank of our carrier into the receiver tube of our hitch. As you can see, I'm resting it on that lower edge. I'm going to lift up on the rear as I push in at the same time. We'll need to slide it far enough in to where our pin holes line up with our hitch pin hole. more

Watch Video

8/14/2014 3:50:42 PM

MaxxTow Hitch Cargo Carrier Review - 2015 Subaru Forester MT70108- Video

Today on our 2015 Subaru Forester, we're going to do a test fit on the 20 by 47 Max Tow Aluminum Cargo Carrier. They've designed it for use in 2 inch hitches, offers a 500 pound weight capacity. The part number on it is MT70108. To begin our test fit, we need to slide the shank of the carrier right into the receiver tube of our hitch. If weight's an issue for you, this would be a great choice. It's a nice light carrier, easy to get on and off the vehicle. Once we have our pin holes lined up, we need to slide through a standard 5/8 inch pin. more

Watch Video

8/14/2014 3:49:15 PM

MaxxTow Hitch Cargo Carrier Review - 2015 Subaru Forester MT70107- Video

Today on our 2015 Subaru Forester, were going to test fit the 17x50 Maxxtow Compact Cargo Carrier. Theyve design this for use with 2 inch hitches. It offers a 500 pound weight capacity. The part number is MT70107. Now to begin our test fit, were going to slide the shank of the rack right into the receiver tube of our hitch. As we do, were going to line up our pin hole with the hitch pin hole. more

Watch Video

8/14/2014 3:48:33 PM

Detail K2 20x60 Hitch Cargo Carrier Review - 2015 Subaru Forester- Video

Today on our 2015 Subaru Forester, we're going to be doing a test fit of the 20x60 Detail K2 Folding Cargo Carrier. They've designed this for use in 2" hitches. Has a weight capacity of up to 500 pounds. The part number on it is K2HCC602. Now to begin our test fit, we need to slide the shank of the rack right into the receiver tube of our hitch. As we do this, we want to line up our pin holes. We can then slide through a standard 5/8" pin. more

Watch Video

8/14/2014 2:56:14 PM

Curt 24x60 Hitch Cargo Carrier Review - 2015 Subaru Forester- Video

Today on our 2015 Subaru Forester, we're going to do a test fit of the 24x60 folding Curt cargo carrier. They designed it for use in 2" hitches and it offers a 500-lbs weight capacity. The part number on it is C18153. To begin our test fit, we need to slide the shank of the carrier into the receiver tube of our hitch. As we do this, we'll keep an eye on our pin holes to see when they line up. With those in line, we'll take a standard 5/8" pin, slide that through and secure it on the other side with a clip. The pin and clip are sold separately, we have that listed on our website as part number PC3. Let's get some clearance measurements now. more

Watch Video

8/14/2014 2:53:42 PM

Pro Series Hitch Cargo Carrier Review - 2014 Subaru XV Crosstrek- Video

Today on our 2014 Subaru XV Crosstrek, we are going to be taking a look and test fitting the Pro Series Solo Cargo Carrier. Now this one measures 31 by 47. It's design for use in two inch hitches and it has a 400 pound weight capacity. Part number on it is PS1040100. Now to begin our test fit, what I like to do, I always put this on by myself and it's a little awkward for just one person but a style that I've developed for doing it and it works very well. Its just to kind of slide the carrier up here to the rear of the vehicle. We want the shank to be resting right there in the bottom of the receive tube, then we are going to lift up on the rear of the carrier and push in at the same time. And it will allow to slide that right in. more

Watch Video

8/14/2014 12:16:29 PM

MaxxTow Hitch Cargo Carrier Review - 2014 Subaru XV Crosstrek MT70108- Video

Today on our 2014 Subaru XV Crosstrek, we're going to be taking a look at the 20 by 47 MaxxTow Aluminum Cargo Carrier. Now, they've designed this so you can use it with the 2 by 2 hitch or the Class 3 hitch. Part number of it is MT70108. Now, this carrier with its aluminum construction is nice and light, so if weight is going to be an issue for you, this maybe a great choice. To begin our test fit, we'll slide the shank of the rack into the receiver tube of our hitch. We'll line up the pin hole with our hitch pin hole. more

Watch Video

8/14/2014 12:14:46 PM

Rola Dart Hitch Cargo Carrier Review - 2014 Subaru XV Crosstrek- Video

Rate your transcript OrderClientKevin BrossRef #20544Order #TC0977636316 Today on our 2014 Subaru XV Cross Track, we're going to be doing a test fit on the 23 x 56 ROLA Dart Folding Cargo Carrier. They've designed this for use on 2 inch hitches. It offers a 450 pound weight capacity. The part number on it is 59550. To begin our test fit we'll slide the shank of the rack right into the receiver tube of our hitch. We need to slide this in far enough so that our threaded hole lines up with our hitch pin hole. We'll then take our provided anti-rattle bolt. more

Watch Video

8/14/2014 11:47:46 AM

MaxxTow Hitch Cargo Carrier Review - 2014 Subaru XV Crosstrek MT70107- Video

Today on our 2014 Subaru XV Crosstrack, we're going to be taking a look and doing a test fit on the MaxxTow 17x50 Compact Cargo Carrier. They've designed for use in 2" hitches, and it's going to offer a 500 pound weight capacity. The part number is MT70107. Now to begin our test fit, we're going to slide the shank of the carrier right into the receiver tube of our hitch. We want to slide this is in far enough so that our hitch pin holes line up with our pin hole that goes to the shank. We're then going to take our standard 5/8" pin. It is sold separately. Part number on it is PC3. more

Watch Video

8/14/2014 11:46:38 AM

Detail K2 20x60 Hitch Cargo Carrier Review - 2014 Subaru XV Crosstrek- Video

Rate your transcript OrderClientKevin BrossRef #20542Order #TC0703339306 Today on our 2014 Subaru XV Crosstrek, were going to be taking a look at the 20x60 Detail K2 Folding Cargo Carrier. Theyve designed this for use in 2 hitches. It offers a 500 pound weight capacity. The part number on it is K2HCC602. To begin our test fit, were going to slide the shank of the rack right into the receiver tube of our hitch. We want to slide this in far enough so that our pinhole lines up with our hitch pinhole. more

Watch Video

8/14/2014 11:44:02 AM

Curt 24x60 Hitch Cargo Carrier Review - 2014 Subaru XV Crosstrek- Video

Rate your transcript OrderClientKevin BrossRef #20541Order #TC0925969025 Today on our 2014 Subaru XV Crosstrek we're going to be taking a look at the Curt 24X60 Folding Cargo Carrier. Theyve designed it so we can use it with the two inch hitch. It has a folding option that tilts away from your vehicle nicely and offers a 500 pound weight capacity. Part number is C18153. To begin our test fit we need to slide the shank of the carrier right into the receiver tube of our hitch. As we do this we want to slide it in far enough so we line up the pin hole with the hitch pin hole. We're then going to take our standard pin, it's a 5/8th pin, secure it with a clip. more

Watch Video

8/14/2014 11:41:09 AM

Curt 19x60 Hitch Cargo Carrier Review - 2014 Subaru XV Crosstrek- Video

Rate your transcript OrderClientKevin BrossRef #20540Order #TC0609941976 Today on our 2014 Subaru XV Crosstrek, we're going to be test fitting the 20 x 60 Curt aluminum folding cargo carrier. They've designed this for use in the 2 inch hitch. It offers a 500 pound weight capacity. Part number on it is C18100. This is a nice, light weight cargo carrier. If weight is going to be an issue for you, this may be a great choice. To begin our test fit, we're going to slide the shank of the rack right into the receiver tube of our hitch and line up the pin hole with our hitch pin hole. more

Watch Video

8/14/2014 11:37:23 AM

Curt 17x46 Hitch Cargo Carrier Review - 2014 Subaru XV Crosstrek- Video

Rate your transcript OrderClientKevin BrossRef #20539Order #TC1048545591 Today we are going to be taking a look at the 17 by 46 Curt Cargo Carrier. They've designed this so we can use it with either the inch and a quarter or two inch hitch, part number on it is C18145. Now this cargo carrier is going to offer us a weight capacity of 500 pounds. To begin our test fit, we are going to slide the shank of the carrier right into the receiver tube of our hitch. Now we want to slide in far enough so we line up our threaded hole with our hitch pinhole. We'll then take our anti rattle bolt, we'll thread that through and then we are going to tighten it down using our wrench. Now as we tighten this down it's going to draw the shank of the carrier right over against the receiver tube. more

Watch Video

8/14/2014 11:36:01 AM

Surco Products 24x60 Hitch Cargo Carrier Review - 2014 Subaru XV Crosstrek- Video

Rate your transcript OrderClientKevin BrossRef #20425Order #TC0719523727 Today on our 2014 Subaru XV Crosstrek we're going to be talking a look at the Surco 24 by 60 Cargo Carrier. It's been designed for use in 2" hitches and it offers a 500 pound weight capacity. Part number on it is 52018. To begin our test fit we're going to slide the shank of the rack right into the receiver tube of our hitch. We'll slide it in far enough so that the pinhole and our hitch pinhole line up. We'll then thread in our anti-rattle bolt. I'm sorry, we'll slide through our standard pin; it's a 5/8 pin. more

Watch Video

8/13/2014 10:03:38 AM

MaxxTow Hitch Cargo Carrier Review - 2014 Subaru Outback Wagon- Video

Today on our 2014 Silver outback we're going to be test fitting the 20 by 40 seven max two cargo carrier. This is designed for use in two inches, it usually offers a 500 pound weight capacity. This part number 00:00:12 is empty 70108. To begin our test fit, were going slide the shank of the carrier right into the racier tube and the hitch. Ill slide it in far enough until we have our pinholes lined up. We can then take a standard 58 spin. more

Watch Video

7/24/2014 2:47:30 PM

Surco Products 24x60 Hitch Cargo Carrier Review - 2013 Subaru Outback Wagon- Video

Today on our 2013 Subaru Outback, were going to be test fitting the Surco 24x60 Cargo Carrier. This is designed for use in 2 inch hitches and it offers a 500 pound weight capacity. Its part number is 52018. To begin the test fit, well slide the shank of the carrier right into the receiver tube of our hitch. As we slide it in, we want to line up our pin holes. Well then take a standard 5/8s pin and slide that through, then well secure it with our clip. more

Watch Video

7/16/2014 12:19:32 PM

Rola Dart Hitch Cargo Carrier Review - 2013 Subaru Outback Wagon- Video

Today on our 2013 Subaru Outback we're going to be test fitting the 23 by 56 Rola Dart. This is a folding cargo carrier. It's designed for use with 2" hitches and it has a 500 pound weight capacity. Its part number is 59550. To begin our test fit we're going to slide the shank of the carrier into the receiver tube of our hitch. We'll slide it in far enough so that our threaded hole lines up with our hitch pinhole. more

Watch Video

7/16/2014 12:12:40 PM

Curt 24x60 Hitch Cargo Carrier Review - 2013 Subaru Outback Wagon- Video

Today on our 2013 Subaru Outback we're going to be test fitting the 24 by 60 folding CURT cargo carrier. This has been designed for use in 2" hitches. It offers a 500 pound weight capacity. Its part number is C18153. To begin our test fit we're going to slide the shank of the carrier into the receiver tube of our hitch. As we do this we'll slide it in until the pinholes line up. more

Watch Video

7/16/2014 12:02:23 PM

Curt 19x60 Hitch Cargo Carrier Review - 2013 Subaru Outback Wagon- Video

Today on our 2013 Subaru Outback, were going to be test fitting the 19x60 Curt Folding Cargo Carrier. This is designed for use in 2 inch hitches and it offers a 500 pound weight capacity. Its part number is C18100. Now to begin our test fit, well slide the shank of the carrier into the receiver tube of our hitch until our pin hole is lined up. With those in line, well slide through our standard 5/8s pin and secure it on the other side with our clip. Now the pin and clip are sold separately. more

Watch Video

7/16/2014 11:59:54 AM

Rola Dart Hitch Cargo Carrier Review - 2014 Subaru Outback Wagon- Video

Today on our 2014 Subaru Outback, we are going to be test fitting the rola dart. This is a twenty three by fifty six folding cargo carrier. It is designed for use in two inch hitches and it offers a four hundred and fifty pound weight capacity. This part number is 59550. We are going to test fit, we are going to slide the shank of the carrier into the receiver tube of our hitch, then you slide it in far enough so the threaded hole lines up with our hitch pinhole. Then take our anti rattle bolt and thread that in, then we use a wrench to tighten it down. more

Watch Video

7/14/2014 6:40:34 PM

MaxxTow Hitch Cargo Carrier Review - 2014 Subaru Outback Wagon mt70107- Video

Today on our 2014 Subaru Outback, We're going to be test fitting the 17 by 50 compact cargo carrier from Maxxtow. This offers a 2-inch hitch capability. It has a 500 pound weight capacity and it's part number is Mt70107. To begin the test fit, we need to slide the shank of the carrier right into receiver tube of our hitch. We'll slide it in far enough so that our pinholes line up. We'll then take our standard pinning clip. We're going to use part number PC3. It is sold separately, you could find it on our website. more

Watch Video

7/14/2014 6:27:15 PM

Curt 24x60 Hitch Cargo Carrier Review - 2014 Subaru Outback Wagon- Video

Today on our 2014 Subaru Outback we're going to be test fitting the 24 by 60 CURT folding cargo carrier. This has been designed for use in 2" hitches and it offers a 500 pound weight capacity. Its part number is C18153. Now to begin our test fit we're going to slide the shank of the carrier right into the receiver tube of our hitch. As we slide it in we need to get our pinholes lined up, then take our standard 5/8 pin and slide that through and secure it here on the other side with the clip. The pin and clip are sold separately; it's part number PC3. more

Watch Video

7/14/2014 6:08:28 PM

Curt 17x46 Hitch Cargo Carrier Review - 2014 Subaru Outback Wagon- Video

Today on our 2014 Subaru Outback, we are going to be test-fitting this 17 by 46 Curt cargo carrier. This is designed for use with inch-and-a-quarter or 2-inch hitches. It's part number is C18145. The carrier's going to offer us a 500-pound weight capacity which is great for getting any of our goodies in there. To begin our test fit, we are going to slide the shank of the carrier right into the receiver tube of our hitch. We'll slide it in far enough so that the threaded pinhole lines up with the hitch pinhole. We'll then slide in our anti-rattle bolt and thread it on down. Once we have it hand tight, we'll use our wrench to tighten it down the rest of the way. more

Watch Video

7/14/2014 6:03:03 PM

Curt Hitch Cargo Carrier Review - 2013 Subaru Outback Wagon- Video

Today on our 2013 Subaru Outback, we're going to be test fitting the 17X46 Curt cargo carrier. This one has been designed for use in both the 1 1/4 and the 2-inch hitches. It offers a 500-pound weight capacity. Its part number is C18145. To begin our test fit, we're going to slide the shank of the carrier into the receiver tube of our hitch. We'll slide it in far enough so that the threaded hole lines up. more

Watch Video

7/9/2014 8:39:03 AM

MaxxTow Aluminum Hitch Cargo Carrier Review - 2013 Subaru Outback Wagon- Video

Today, on our 2013 Subaru Outback, we're going to be test fitting the 20 x 47 Maxxtow Cargo Carrier. It's been designed for use in 2-inch hitches. It offers a 500-pound weight capacity. Part Number is Mt70108. Now to begin our test fit, we're going to slide the shank of the carrier right into the receiver tube of our hitch. We'll slide it in far enough for the pinholes line up. more

Watch Video

7/7/2014 11:03:37 AM

MaxxTow Hitch Cargo Carrier Review - 2013 Subaru Outback Wagon- Video

Today on our 2013 Subaru Outback, we're going to be test fitting the 17X50 Maxxtow compact cargo carrier. This is designed for use with 2-inch hitches. It offers a 500 weight capacity. Its part number is MT70107. To begin the test fit, we're going to slide the shank of the carrier right into the receiver tube of our hitch. We'll slide it in far enough to where our pinholes are lined up. more

Watch Video

7/7/2014 11:03:25 AM

Pro Series Solo Hitch Cargo Carrier Review - 2006 Subaru Outback Wagon- Video

Today on our 2006 Subaru Outback wagon we're going to be test fitting the Pro Series Solo. This is a 31 by 47 cargo carrier. It's designed for use in 2" hitches and it offers a 400 pound weight capacity. Its part number is PS1040100. Now this is one of the larger racks that we carry, so it's good to have a friend with you to help you get it installed on the vehicle. If you don't have a friend, we'll then this is a technique I've adopted for installing it. Just get it kind of low here, bring it towards your vehicle, and allow the shank to rest right into the lower portion of the receiver tube. more

Watch Video

7/3/2014 6:01:52 AM

MaxxTow Aluminum Hitch Cargo Carrier Review - 2006 Subaru Outback Wagon- Video

Today on our 2006 Subaru Outback we're going to be test fitting the 24 by 47 MaxxTow aluminum cargo carrier. They've designed this for use in 2" hitches and it offers a 500 pound weight capacity. Its part number is MT70108. Now to begin our test fit we're going to slide the shank of the carrier into the receiver tube of our hitch. We'll slide it in far enough so we have our pinholes lined up. We're then going to take a standard 5/8 pin and we'll slide that through. more

Watch Video

7/3/2014 5:59:16 AM

MaxxTow Hitch Cargo Carrier Review - 2006 Subaru Outback Wagon- Video

Today on our 2006 Subaru Outback we're going to be test fitting the 17 by 50 MaxxTow compact cargo carrier. They've designed this for use in 2" hitches. This offers a 400 pound weight capacity. Its part number is MT70107. Now to begin the test fit we're going to slide the shank of the rack right into the receiver tube of our hitch. We'll slide it in far enough so that the hitch pinhole lines up with the hole in the shank. more

Watch Video

7/3/2014 5:58:45 AM

Rola Dart Folding Hitch Cargo Carrier Review - 2006 Subaru Outback Wagon- Video

Today on our 2006 Subaru Outback we're going to be test fitting the Rola Dart. This is a 23 by 56 cargo carrier, has the folding option, and it's designed to fit 2" hitches. It offers a 450 pound weight capacity. Its part number is 59550. To begin our test fit we're going to slide the shank of the carrier right into the receiver tube of our hitch. We'll slide it in far enough so that our threaded hole lines up with our hitch pinhole. more

Watch Video

7/3/2014 5:53:28 AM

Detail K2 Cargo Carrier Review - 2006 Subaru Outback Wagon- Video

Today on our 2006 Subaru Outback were going to be test fitting the K2 Detail. This is a 20x60 folding cargo carrier. Its been designed for use with 2 inch hitches and it offers a 500 pound weight capacity. Its part number is K2HCC602. Now to begin our test fit were going to slide the shank of the carrier right into the receiver tube of our hitch. As we slide it in we want to line up the hole in the shank of the carrier with our hitch pin hole. Were then going to take a standard 5/8 pin. The pin is sold separately. more

Watch Video

7/3/2014 5:50:35 AM

Curt Cargo Carrier Review - 2006 Subaru Outback Wagon- Video

Today on our 2006 Subaru Outback wagon we're going to be test fitting the 20 by 60 CURT folding cargo carrier. They've designed this for use in 2" hitches. It offers a 500 pound weight capacity. Its part number is C18153. Now to begin the test fit we're going to slide the shank of the carrier right into the receiver tube of our hitch. We need to slide it in far enough so we have our pinholes lined up. more

Watch Video

7/3/2014 5:46:11 AM

Curt Hitch Cargo Carrier Review - 2011 Subaru Outback Wagon- Video

Today on our 2011 Subaru Outback Wagon, we'll be test fitting the Curt 20 inch by 48 inch Cargo carrier, part number c1845. Now our Outback is equipped with a class two, one and a quarter inch hitch so we'll need to remove the adapter to mount the carrier. Well take the shank of the carrier and insert it into the receiver tube of our hitch. We'll line up the hitch bit holes and then thread in our anti-rattle bolt using a wrench to tighten it down. With that done, our carrier is mounted and we're going to go over a handful of clearance measurements to give you an idea of how the carrier will fit behind the Outback. We've got about eleven and a half inches of ground clearance at the rear of the carrier and one inch of space between the bumper and the closest part of the carrier. more

Watch Video

10/4/2012 5:18:31 PM

Curt Hitch Cargo Carrier Review - 2012 Subaru Impreza- Video

Today on our 2012 Subaru Impreza, we'll be test fitting the Curt 20x48 Cargo Carrier for 1-1/4 and 2-inch hitches, part number C18145. Now, we removed the included adapter for the 2-inch hitch so we're ready to fit it to the vehicle. We'll slide the cargo carrier shank into the hitch, line up the hitch pin hole, and install and tighten down our anti-rattle bolt. With our bolt tight, our cargo carrier is secured to the vehicle. Now, we'll go ahead and give you a few measurements. From the closest point of the cargo carrier to the back of the vehicle is 3-1/2 inches and the cargo carrier will add an additional 23 inches of overall length to your vehicle. more

Watch Video

8/9/2012 2:12:24 PM

Curt Hitch Cargo Carrier Review - 2010 Subaru Forester- Video

Today on our 2010 Subaru Forester, well test-fitting part number C18145. This is the Curt 20x48 Cargo Carrier for 1-1/4 and 2-inch Hitches. Now, weve already removed the included adapter for the 2-inch hitch, so were ready to go ahead and fit it to the vehicle. Well slide the cargo carrier shank into the hitch, line up the hitch pinhole and install and tighten down our anti-rattle bolt. With our bolt tight, our cargo carrier is secured to the vehicle. Well now go ahead and give you a few measurements. more

Watch Video

7/20/2012 11:30:50 AM

Curt Hitch Cargo Carrier Review - 2010 Subaru Impreza- Video

Today on this 2010 Subaru Impreza Hatchback, were going to be test fitting Curts 20x48 cargo carrier, part number C18145. To mount the cargo carrier on our vehicle, well insert the shank of the carrier into our receiver hitch on our vehicle. Well line up the pinholes, insert the anti-rattle bolt and well tighten it down with a -inch wrench. Well go ahead and take a couple of measurements to check for clearance and exhaust spacing on our cargo carrier. We have about 8- inches of ground clearance from the bottom of the cargo carrier to the ground and we have about 3- inches of rear bumper clearance from the outermost edge of the bumper to the closest portion of the cargo carrier. We have about 9- inches from the exhaust tip to the closest edge of our cargo carrier. more

Watch Video

7/2/2012 1:57:47 PM

  4