Thule Roof Rack Review - 2013 Volkswagen Jetta SportWagen- Video
Today on our 2013 Volkswagen Jetta Sportwgen, we're going to be doing a test fit of the Thule Aero Blade Roof Rack System and it's going to be part number THARB47 and the foot pack is going to be TH450R. Again that's going to be THARB47 for the Aero Blades and then the foot pack is going to be TH450R. All right really simple to put together especially if you already have that factory roof rail installed from front to back and then all you need to do is get the crossbars. On the back side here we did mount up the bottom foot pack to the backside of that bar to give us a nice reference point to place our next one. Really simple to put on. First thing we'll do is we'll take off the end cap, you just rotate that around, deep press the little piece here and pull the end caps right off. Once you have the end caps off, notice you will have your scale in here but we won't be using that for this because they are already are set. We'll remove the end cap off the 450R which will also have our tools included on it and then simply slide those on with the strap towards the inside and the tool access to the outside which is going to be that bolt right there. more
5/21/2015 4:02:10 AM
Thule AeroBlade Edge Roof Rack Installation - 2011 Volkswagen Jetta SportWagen- Video
Today on our 2011 Volkswagen Jetta Sportwagen well be test fitting the Thule Aeroblade Edge Roof Rack System for raised factory side rails, part number th7502-th7502. To begin our test fit well grab our front bar and place it onto the front part of our roof. Well find a fixed point on the side rails so that we can make sure that our feet are in line with each other. On this Jetta Sportwagen theres a line here at the front of the side rail. With our bar in place we can grab our strap, place it into the foot of our carrier and wrap it around our side rail. Youll notice that on your strap on one end you have four slots numbered one through four. more
8/1/2013 12:54:55 PM
Rhino Rack SXB Roof Rack Installation - 2010 Volkswagen Jetta SportWagen- Video
Today on this 2010 Volkswagen Jetta Sportwagon we will be installing a Rhino-Rack Roof Rack, part number SXB3. We already have our cross mounts put together, and we are ready to mount them up on top of our vehicle. This system is designed to attach to our factory raised side rails so there is not specific cross bar spread that we need to setup for. However, you may want to check the owners manual or the instructions for whatever accessories you will be using to see if they have a required cross bar spread. You need to make sure that the Rhino Rack cross bars run perpendicular to our factory raised side rails. To do this we will find a fixed point on the side rails and measure from there to the end of the clamp on the bottom of our Rhino Rack bar. more
10/26/2011 10:44:31 AM
Filter Videos
Filter Videos
