Malone Roof Rack Review - 2015 Nissan Rogue- Video

Speaker 1: Today we have our 2015 Nissan Rogue, we're gonna be installing the Malone Steel Top Square Bar, Roof Rack System. Everything you see comes with it, here on the table. And it comes pretty much already assembled, so the installation process is gonna be very easy.We already have our front bar installed on our vehicle. Now how we got it to this point, we set it onto the factory raised side rails, and then we picked a point up at the front here, mainly this line, and we measured back from that equal distance on both sides. And then we measured for our crossbar overhang, and tightened everything down.We'll go ahead and finish up with our rear bar here on the table. And show you exactly how we did that.First off, we're gonna take our end cap, and just pop that on our bar here. more

Watch Video

5/21/2018 11:27:13 AM

Inno Roof Rack Review - 2015 Nissan Rogue- Video

Speaker 1: Today on our 2015 Nissan Rogue we're going to be test fitting the Inno Aero Roof Rack system consisting of part numbers INXB100-2. These are the 39 inch aero crossbars. We'll also be using part number INXS100 and these are the flush feet for the factory raised side rails. We already have our front bar installed on our vehicle and how we got it to the point that it is now, we set them on top of the factory raised side rails and we measured back from the point such as this line here the same distance on both sides to keep it even and then we tightened it down. Our bar on the table here is going to be the rear bar for the side rails and we already have it partially assembled on our table right now.This is everything that comes with the kit. You don't need any tools to install this so this is pretty much an easy install. more

Watch Video

5/21/2018 8:58:38 AM

Yakima Roof Rack Review - 2015 Nissan Rogue- Video

Speaker 1: Today on our 2015 Nissan Rogue we're gonna be test-fitting the Yakima core bar roof rack system. That's gonna be consisting of part numbers Y00421. These are the Yakima core bars that you see here. These are 50 inches long. We'll also be using part number Y00147. These are the Timberline towers that specifically attach to your factory raised side rails.We already have our front bars installed on our vehicle, and the way that we got them to where they are now is we set them into place and then we picked a spot along the factory side rail here, this line here, and we measured back from that on both sides equally to make sure it stayed even, and then we measured for our cross bar overhand. more

Watch Video

5/21/2018 8:57:51 AM

Yakima Roof Rack Review - 2015 Nissan Rogue Y00147- Video

Speaker 1: Today in our 2015 Nissan Rogue, we're going to be test fitting the Yakima JetStream roof rack system. It's going to consist of part numbers Y00425. These are the JetStream crossbars. These also come in silver. We'll also be using part number Y00147, and these are the TimberLine Towers that are going to attach to your factory raised side rails.We already have the front bar assembled on our vehicle here. How we got it into place is we picked a point and measured back. more

Watch Video

5/21/2018 8:57:10 AM

Rhino-Rack Vortex Aero Crossbars Installation - 2016 Nissan Rogue- Video

Today on our 2016 Nissan Rogue, we'll be taking a look at and showing you how to install the Rhino-Rack roof rack kit. This consists of part numbers RRVA126B-2, that's going to be the vortex arrow crossbars. These bars also come in silver, part number RRVA126S-2 and part number RRSX001, that's the Rhino-Rack RS series roof legs. The Rhino-Rack crossbar kit is a perfect solution for carrying your vehicle accessories on your vehicle's roof rack, whether those are bike racks, cargo baskets, or ski and snowboard carriers. It's also going to empty up space inside your vehicle, and allow you to carry more cargo. The crossbar's going to be an aerodynamic shape, so it's going to help to reduce wind noise and drag, as well as that weather strip in the top, it's going to help keep dirt, debris, and liquid out of your crossbar. The weather strip is easy to remove, and you can insert channel-mounted accessories and easily cut down the weather stripand insert it around your channel-mounted accessories. The crossbars come with endcaps that have plastic lock cores, thought these can be removed, and you can purchase metal lock cores on our website. The part number for the metal lock cores is RRVA-LEC4. The foot pack is going to have rubber on the bottom, so it's going to give a nice, flush look to your crossbars. more

Watch Video

2/17/2017 8:42:12 AM

Thule AeroBlade Crossroad Roof Rack Installation - 2016 Nissan Rogue- Video

Today on our 2016 Nissan Rogue we'll be taking a look at and showing you how to install the Thule Roof Rack system. This is going to consist of part numbers THARB47 which will be the Thule Aeroblade Crossbars. These bars also come in black with part number THARB47B and part number TH450R which is the Thule Rapid Cross Road Roof Mounted Foot Pack. The Thule roof rack kit is a perfect solution for carrying your vehicle's roof rack accessories on your vehicle's roof whether that's bike racks, cargo baskets or ski and snowboard carriers. The crossbar is going to be an aerodynamic shape with a whether strip on the inside to help to reduce wind noise and drag. We can flip part of the end cap cover out of the way. more

Watch Video

2/17/2017 8:42:09 AM

Rhino Rack Roof Rack Review - 2015 Nissan Rogue- Video

Today on our 2015 Nissan Rogue, we're doing a test fit of the Rhino Rack Vortex Aero crossbars. The part number for the crossbars we're using today is RRVA126S-2. For the foot pack, we have here is RRSX001. We already have our front bar on. We're going to show you how we put this last foot pack on to our crossbar and then how we load that up on to our vehicle. We're just going to flip the crossbar over. We're going to line everything up down here at the bottom track. more

Watch Video

1/13/2016 3:16:06 PM

Yakima Roof Rack Review - 2015 Nissan Rogue Y00408- Video

Today on our 2015 Nissan Rogue we're going to be doing a test fit of the Yakima roof rack system for the 2015 Nissan Rogue. It's going to be a round bar setup with the factory RailGrab feet pads. If you look here, you'll see part number Y00138. This is going to be your RailGrab setup. It comes with a multitude of different feet that you can attach just by unthreading the bolt on the inside here and putting a new one on. This is a fully adjustable setup. more

Watch Video

5/1/2015 11:41:50 AM

Rhino Rack Roof Rack Review - 2015 Nissan Rogue RRVA126B-2- Video

Today on our 2015 Nissan Rogue we're going to be doing a test fit of the Rhino-Racks roof rack system. It's going to be mounted up on our factory crossbars. We'll go through on how to install it and make sure how it looks and fits for your application. This is going to be your RRVA126B-2, which is going to be your 49" Vortex black aluminum crossbar from Rhino-Rack. These are going to be your feet pad for your application, which is going to be RRSX001. We're going to show you how to put these on. These are the tools that we're going to need. more

Watch Video

5/1/2015 11:41:06 AM

Thule Roof Rack Review - 2014 Nissan Rogue- Video

Today on our 2014 Nissan Rogue we're going to test fit the Thule Crossroads roof rack system. We're using the 50" square bars. Those are part number THLB50, and the 450 foot packs or the Crossroads foot packs, the appropriate part number is TH450. Now we are using the 50" bars but with the setup the way it is you can go as large as you'd like with the width. It's a preference matter. Some people really like when they hang off so they can put some accessories here on the end. That's going to be up to you. more

Watch Video

10/20/2014 12:03:42 PM

Thule AeroBlade Crossroad Roof Rack Installation - 2012 Nissan Rogue- Video

Today on our 2012 Nissan Rogue, we'll be test fitting the Thule Rapid Crossroads roof rack system, part numbers THARB53 and TH450R. We'll begin our test fit by placing the front load bar onto the raised side rails of our roof. Now there's a cutout on the raised side rail from the part that anchors into the roof and to the elongated parallel rails on the raised side rails. We'll set the feet on both sides of the vehicle right next to these cutouts to make sure that the front load bar is perpendicular to the raised side rails of our Rogue. Once we've established this position, we'll then pop off the end cap to bring the rubber-coated steel straps around the underside of the raised side rails. We'll then use the included Allen key at the end of the end cap to tighten down the black Allen bolt to bring the straps up around tightly against the raised side rails. more

Watch Video

7/1/2013 10:32:13 AM

  1