Thule Roof Rack Review - 2012 Mazda 3- Video
Today on our 2012 Mazda 3 we're doing a test fit of the Thule roof rack kit. These are our Aero-Blade crossbars with part number THARB47. Our foot pack is TH460R. Our fit kit, using the fixed mounting points on our hatchback version of the Mazda 3, it's going to be part number THKIT3069. Now we already have our front bar in place. We've gone ahead and removed all of our covers. more
11/21/2016 4:02:57 PM
Rhino Rack Roof Rack Review - 2012 Mazda 3- Video
Today on our 2012 Mazda 3 we're doing a test test of the Rhino Rack Roof Rack Kit. This is consisting of 3 part numbers. The first is our Vortex Aero cross bars, part number RRVA118B-2. Our 2,500 series Legs for our Vortex Aero cross bars using RRRLKVA and our fit kit for our Mazda 3, part number DK289. Now we already have our front bar on, we've taken out our spacers here at the top and installed these bolts. This is where we're going to attach our cross bars. These are simple to remove, we just use a flat blade screwdriver, pushed it back, it popped right out, and then tighten those down. We do have that front cross bar installed, we've got part of our back bar installed as well. We're going to show you how to put the last kit together and then how to install it onto our vehicle. Everything that you see here is included with our kit. more
11/21/2016 4:02:42 PM
Thule Roof Rack Review - 2012 Mazda 3 TH7602-TH7602- Video
Today on our 2012 Mazda 3 we're doing a test fit of the Thule AeroBlade Edge Crossbars. The part number for our crossbars today is TH7602-TH7602. Then the part number for our fit kit for this is THKIT3069. We already have our front bar put together. We're going to show you how we put our back bar together, mostly with the last foot pack, and then how we'll mount it onto our vehicle. We're going to start out with everything that you see here. All of this is included with the kit, except for our wrench here. more
4/4/2016 10:36:17 AM
Rhino Rack Roof Rack Review - 2008 Mazda 3- Video
Today on our 2008 Mazda 3, we're doing a test fit of the Rhino-Rack Vortex Aero Crossbar Roof Rack. The crossbar numbers are RRVA118B-2, the Rhino-Rack 25 Series Legs are RRRLKVA, and the clamps and pads are DK041. Now we have he first one already on our vehicle, I'm just going to show you how we should install the second one. Here in the table is everything you get. You have your crossbar, you have your 2500 Series Leg with the covers. This is the clamp and the pad, and this is our end cap, and the two tools that also come with it. more
1/6/2016 7:31:30 AM
Whispbar Through Bar Roof Rack Installation - 2011 Mazda 3- Video
Today on our 2011 Mazda 3, were going to be test fitting the Yakima Whispbar System using the three bars, part number WB-S16 and the Fit Kit for this vehicle, WB-K451. The first thing we need to do is remove the fix-point covers. There are two on each side of the vehicle. Next we need to install our grub screws. On this Mazda, well be using the 60mm grub screws. These are the shorter ones included with the fit kit. more
10/30/2012 9:59:59 AM
Filter Videos
Filter Videos
