Inno Roof Rack Review - 2011 Kia Sorento- Video

Speaker 1: Today on our 2011 Kia Sorento we're gonna be testing the Inno Square Bar Roof Rack System. That's gonna be Part Numbers INB127. That's gonna be our 50" square bars right up top here. The other part is gonna be our Inno Feet that's gonna be Part Number INFR. This roof racking system can carry a wide variety of accessories such as, bike racks, cargo carriers, cargo racks, anything to that nature. Because of the square design you are going to have some wind noise, and some drag while you're driving, but you can purchase a ferring 00:00:36 that'll act as a wind deflector. more

Watch Video

8/8/2018 4:07:11 PM

Rhino Rack Roof Rack Review - 2011 Kia Sorento- Video

Speaker 1: Today on our 2011 Kia Sorento, we're going to be testing the Rhino-Rack Vortex Aero Roof Rack System. That's going to consist of part numbers RRVA118B-2. That's going to be our 46-inch crossbars we have up top. Then we're going to have our SX Series Legs, which is going to be part number RRSX009. As you can see, these bars also have a elliptical design, so it's going to help cut down on wind noise and drag while you drive. These crossbars also come in silver under part number RRVA118S-2.Now, if we look at our SX Series Legs, we're going to see it's kind of a clamp-style system where it basically sandwiches our factory side rails. more

Watch Video

8/8/2018 8:48:00 AM

Inno Roof Rack Review - 2011 Kia Sorento INXB108-2- Video

Speaker 1: Today on our 2011 Kia Sorento we're going to be test fitting the Inno Aero Roof Rack System. That's going to consist of part numbers INXB108-2. And the part number's going to be our 42 inch cross bars that we have on top. As you can see they have a nice aerodynamic shape to them. That's going to help cut down on wind noise and drag while you're driving. Our other part is going to be our Inno Flush Feet System, and ;ts going to be part number INXS100.So, how this is installed, we have this rubber coated steel strap that wraps under out factory side rail and comes up and tightens down, or hooks in to our flush feet system and is tightened down so that it's secured to our side factory side rails. more

Watch Video

8/8/2018 8:47:35 AM

Thule Roof Rack Review - 2018 Kia Sorento- Video

Speaker 1: Today, on our 2018 Kia Sorento, we'll be taking a look at, showing you how to install the Thule Roof Rack System. This is going to consist of the Thule AeroBlade Edge Roof Rack Bars, this is part number: TH7601B-TH7602B; and the Thule Fit Kit for the podium-style foot pack, part number: THKIT4056. Now keep in mind that our crossbars are also available in silver with part number: TH7601-TH7602.This roof rack system is going to be a low-profile, aerodynamic design, which will allow you to carry your different vehicle accessories on your roof, whether those are bike racks, ski and snowboard carriers or cargo baskets. It's going to free up space inside your vehicle and allow you to carry more gear or more passengers.The aerodynamic shape of our bars is going to help to prevent wind, noise and drag. The weatherstrip on the inside can be removed and cut down to accept channel-mounted accessories.Our end cap has the option to remove this plastic lock core and place in an all-metal lock core, which will help to reduce possibilities of theft and tampering of your roof rack system as well as any channel-mounted accessories.Our fit kit it going to be custom-cut and made to our vehicle to give us a nice, secure fit, and any portion of our fit kit that touches our vehicle is going to have a rubber coating to prevent any scratches or abrasions.This roof rack system is made out of a light-weigh aluminum, so it's durable and rust-resistant. The Thule AeroBlade Roof Rack System has a 165 weight capacity, though you do want to double check your vehicle's owner's manual to make sure your roof can withstand that much weight. more

Watch Video

11/1/2017 6:18:15 PM

Thule Roof Rack Review - 2017 Kia Sorento- Video

Today on our 2017 Kia Sorento, we'll be taking a look at and showing you how to install to Thule roof rack system. This is going to consist of the Thule AeroBlade crossbars, part number THARB47, the Thule Podium Footpack, part number TH460R and the Thule Fit-Kit for our Sorento, part number THKIT4056. Our crossbars are also available in black with part number THARB47B. The Thule roof rack system is a great solution for carrying your vehicle accessories on your roof, whether those are bike racks, ski and snowboard carriers, kayak carriers, or cargo baskets. The aerodynamic shape of our bars, as well as the weatherstrip on the inside, is going to help to reduce wind noise and drag. Remove our end cap out of the way, you can see our weatherstrip is easy to remove. more

Watch Video

7/24/2017 3:07:55 PM

Rhino Rack Roof Rack Review - 2015 Kia Sorento- Video

Today on our 2015 Kia Sorento we're going to be test fitting the Rhino Roof Rack System, consisting of part numbers RRVA118B-2, these are the vortex arrow cross bars, but they also come in silver as part number RRVA118S-2. We also have part number RRSX009, these are the SX series legs for the vortex arrow cross bars, particularly for the factory raised side rails. We already have the front one installed. You can see that our cross bar here has a nice aerodynamic shape to it, and that's going to cut down wind noise and drag while you're driving. Combined with the rear cross bar, it has a carrying capacity of 165 pounds. Now, you want to double check with your vehicle's manual to make sure that the roof can withstand that kind of weight. Let's go ahead and show you how the rear one goes on, and we already have it partially assembled on our table over here. We'll take our leg here, we'll make sure that this end fits into the T slot end of our cross bar. more

Watch Video

7/5/2017 1:07:33 PM

Thule Roof Rack Review - 2015 Kia Sorento- Video

Today on our 2015 Kia Sorento, we're going to be test fitting the Thule Roof Rack System consisting of part numbers THARB53. These are the Thule Aero Load Bars. These also come in black as part number THARB53B, and then part number TH450R and these are the foot packs that are actually going to attach to your factory raised side rails. With the front one installed, you can see that the load bars here have a nice aerodynamic shape to them. That's going to cut down wind noise and drag while you're driving. Along with the rear load bar, these actually have a carrying capacity of 165 pounds, although you want to double check with your manufacturer's instructions to make sure your roof can withstand that weight. Let's go ahead and show you how the rear one goes on. We already have it partially assembled on our table here. more

Watch Video

6/7/2017 8:17:06 AM

RockyMounts Roof Rack Review - 2015 Kia sorento- Video

Today in our 2015 Kia Sorento we're going to be test-fitting the Rocky Mountain Roof Rack system. This is going to consist of part numbers RKY3056, these are the crossbars, and part number RKY3002, and these are the feet that are actually going to connect to your factory raised side rails. We have the front one installed. As you can see it has a nice aerodynamic shape to it and that's going to cut down wind noise and drag while you're driving. Combined with the rear crossbar, these are going to have the carrying capacity of 165 pounds, although you want to double-check with your vehicle's manual to make sure that your roof can withstand that weight. Let's go ahead and show you how the rear bar goes on. We already have it partially assembled on our table here. We'll first take our foot here and you can see it has this T-shape portion here and it'll fit into this T-slot into our bar. more

Watch Video

6/5/2017 9:17:08 AM

Thule Roof Rack Review - 2013 Kia Sorento- Video

Today on our 2013 Kia Sorento we're doing a test fit of the Thule Aeroblade Crossbars. The part number for the crossbars we're using today is THARB53 and for our foot pack we're using TH450R. Now we already have that front bar in place. We're going to show you how to put our back bar together. We've got one of the U foot packs on our bar. We'll just show you this last one here. more

Watch Video

7/12/2016 8:06:46 AM

Thule Roof Rack Review - 2016 Kia Sorento- Video

Today, on this 2016 Kia Sorento, we're going to be test fitting the Thule AeroBlade Roof Rack system, consisting of part numbers THARB47, which are the load bars, part number TH460R, which are the Thule Podium Foot Pack, and part number THKIT4056, which is the Fit Kit, or clamps that go around to your factory raised side rails here. Now, we have the first one installed already. Let's go ahead and show you how the rear one installs. We have it partially assembled on our table here. We'll go ahead and show you how that goes together. First off, we'll take the Fit Kit portion, which has this tightening tool and this bolt here, which will go through the center portion of this Podium Foot Pack. You'll see it has a threaded hole right there. Let's go ahead and loosely install it for now. more

Watch Video

4/19/2016 2:37:54 PM

Thule Roof Rack Review - 2016 Kia Sorento TH7601-TH7602- Video

Today on this 2016 Kia Sorento, we're going to be test fitting the Thule AeroBlade Edge Roof Rack System, consisting of part numbers TH7601-TH7602, which will be the load bars with the feet, and part number THKIT4056 which is the Fit Kit that clamps around your raised factory side rails. We have the front one installed already. Let's go ahead and show you how the rear one installs. We have it partially assembled on our table here, the foot pack already attached to our load bar. Let's show you how the other one attaches. If you look at the end here you'll see it has a threaded hole here in the center. That's where our bolt from our Fit Kit will thread into. more

Watch Video

4/19/2016 2:37:36 PM

Whispbar Through Bar Roof Rack Installation - 2013 Kia Sorento- Video

Today on our 2013 Kia Sorento we'll be test fitting the Whispbar Through Bar Roof Rack using part number wb-s16. We'll also be using the raised factory side rail fit kit for Whispbar Flush Through and HD Roof Rack Systems, part number wb-k328. With our roof rack system assembled according to the instructions we'll begin our test fit by placing the front bar onto the front part of our side rails.We'll go ahead and fit our fit around the side rails. We can grab our Allen key and tighten the Allen bolt to secure our front bar into position. We'll need to tighten on both sides of our vehicle. We'll grab our rear bar and place it onto the rear part of our roof. more

Watch Video

6/26/2013 9:02:36 PM

  1