SeaSucker Roof Rack Review - 2018 Ford Edge- Video
Today on our 2018 Ford Edge we're going to be doing a test fit on the SeaSucker Monkey Bar roof rack system. That's part number 298-SX60000. It uses vacuum cups to adhere itself to your Ford Edge's roof. So that's very unique to this roof rack system. That means you can easily take it off and put it on maybe another vehicle in your household. It'll adhere to glass, like your Edge's roof, metal, must about any roof rack system. more
12/20/2018 8:07:12 AM
Rhino Rack Roof Rack Review - 2013 Ford Edge- Video
Speaker 1: Today on our 2013 Ford Edge we're going to be test fitting the Rhino Rack Vortex Aero Roof Rack System. This is going to consist of part numbers RRVA137B-2. These are the Vortex Aero Crossbars, 54 inches long. These also come in silver, part number RRVA137S-2. We'll also be using part number RRRLKVA, these are the 2500 series feet for the Vortex Aero Crossbars. And finally part number DK228, and that's going to be the fit kit, and the clamps that clamp on the door frame of your existing vehicle.Now, how we got the front one installed here, we had everything assembled, we put it into place, and then we measured from the center of the door jamb here to the center of the bar on both sides to make sure it was even, to get everything measured out. more
6/29/2018 7:48:29 AM
Rhino-Rack RS 2500 Vortex Aero Roof Rack Installation - 2013 Ford Edge- Video
Today on our 2013 Ford Edge we'll be taking a look at and showing you how to install the Rhino Rack RS 2500 Roof Rack System, part number: RRRS524B. This kit is also available in silver, part number: RRRS524. The Rhino Rack Roof Rack System is a great solution for carrying your bike racks, cargo baskets and ski and snowboard carriers on your vehicle's roof. This will allow you to empty up space inside your cargo area. This is an aerodynamic roof rack that is going to have vortex weatherstrip on the inside that helps to reduce wind, noise and drag compared to other styled crossbars. This weatherstrip on the top is removable and it is going to help to keep dirt, debris and liquid out of your crossbar. It is also easily cutdown to accommodate channel-mounted accessories. The locking end cap is going to make sure your refract system stays secure to your vehicle and the custom pad, as well as the clamp, is custom fit to your vehicle and has rubber on any portion that touches your vehicle; so it will help to reduce any kind of scratches or abrasions. This roof rack system has a 165 pound weight pound capacity, so you do want to double check your vehicle's owner's manual to make sure it can withstand that much weight. We all ready have our first crossbar installed on our vehicle. We're going to show you how we put the second one together. more
3/21/2017 2:32:19 PM
Rhino Rack Roof Rack Review - 2010 Ford Edge- Video
Today on our 2010 Ford Edge, we're going to be taking a look at the Rhino Roof Rack System. This consists of part numbers RRVA137B-2 and those are the Vortex Aero crossbars in black, 54 inches long. You can also get these in silver as part number RRVA137S-2. We also have part number RRRLKVA, and these are the 2500 series legs for the Aero crossbars, and part number DK228, and that's the custom fit kit which will clamp on to your vehicle. We already have the front bar installed, and you can see with the shape of the bar itself, it has a nice aerodynamic shape to it, and that's going to cut down wind noise and drag while you're driving. Along with the rear crossbar in place, it has a combined carrying capacity of 165 pounds, although you always want to double check with your vehicle's manual to make sure it can withstand that kind of weight. more
10/6/2016 1:57:09 PM
Yakima Roof Rack Review - 2015 Ford Edge- Video
Today on our 2015 Ford Edge Titanium we're going to be doing a test fit of the Yakima Q Tower Roof Rack System. As you can see we've already got our front bar up here in place, you can see what it's going to look like once you get it up on top of the vehicle. We're going to show you how to place on that second bar, place everything together, how it all assembles and comes together as one bar and set-up here. Note that we did already put the front bar on measuring from the edge of the glass here to the front of the foot pack here, that's going to be 13" in distance. The distance from this Q Tower to the other Q Tower on the other side, at the same point, is going to be 43 and 5/8 ", making sure that you have an even amount of bar overhang on each side. We'll go ahead and go through on how all that stuff that I just said, the bar overhang and what part is what part, right here right now. You're going to have the bar, which is part number Y00409, and your Q towers which will be your podium styles, they're going to sit up, those are part number Y00124. more
8/13/2015 2:11:23 PM
SportRack Roof Rack Review - 2010 Ford Edge- Video
Today on our 2010 Ford Edge, we're going to be doing a test fit of the Sport Rack Semi Custom roof rack. Now by semi custom it comes already put together. All you need to do is adjust it per the instructions to whatever number it says to adjust them for your vehicle. You do some minor adjusting, pretty much throw them up there, and you'll have it look like the one that's up here on the front. The only thing that I could advise as far as us putting it on the vehicle is you need to really keep an eye on this rubber seal, because it tends to want to push itself under or over, depending on what kind of vehicle you have. Just make sure that you maintain that full contact with that rubber seal so you don't get the metal apart rubbing on the vehicle. This is will be part: SR1010. more
3/26/2015 2:55:39 PM
Rhino-Rack Roof Rack Installation - 2013 Ford Edge- Video
Today on our 2013 Ford Edge, we'll be test fitting the Rhino Rack 2500 Series Roof Rack with Aero Crossbars 54 inches long in silver part number DA1375. We'll also be using the Custom DK Clamps and Pads for the Rhino Rack 2500 Series Roof Rack part number DK228. With our roof rack assembled according to the instructions, we'll grab our front bar and place it onto front part of our roof. To ensure that we have our bar in the correct spot, we need to measure 170 millimeters or 17 centimeters from the center of the door jamb to the center of our foot pack. We'll do this measurement on both sides to ensure that our feet are in line with each other. Once we have it in place, we can go ahead and use the included tool to tighten down our bolts which will secure our clamps around our roof line. We'll open our rear doors and grab our rear bar. To ensure that we have our rear bar in the correct spot we need to measure 700 millimeters or 70 centimeters from the center of our front bar to the center of our rear bar. more
9/30/2013 1:07:59 AM
Filter Videos
Filter Videos
