bing tracking image

2012 Dodge Journey Roof Rack Installation And Review Videos

     

RockyMounts Roof Rack Review - 2012 Dodge Journey- Video

RockyMounts  Roof Rack Review - 2012 Dodge Journey

Today, on our 2012 Dodge Journey, we're going to be doing a test fit of the RockyMounts Ouray Crossbars, with the Flagstaff towers. This is going to be part number RKY3056 and RKY3002. 3056 is going to be your Crossbar, that Ouray Crossbar, which has a nice sleek look. Then your towers, which are going to sit on top of your factory Crossbars, which are going to be the Flagstaff towers, part number RKY3002. When you get your towers, it's going to come with the end caps, too, for your Crossbars. Real simple and easy to put together. more


Watch Video

11/23/2015 10:56:06 AM



Inno Roof Rack Review - 2012 Dodge Journey- Video

Inno  Roof Rack Review - 2012 Dodge Journey

Today with our 2012 Dodge Journey, we're going to be doing a test fit of the inner roof rack system. As you can see, we've already got our front bar up here and in place on our vehicle. This is going to be part number INB127 for your crossbar, which is going to be that square bar. Then you're going to have your foot packs, which is going to be part number INFR. When you get your low bars, they're going to come with the two end-caps as well and your locking set with keys for the ends of your INFR foot pads. We'll go ahead and remove both the end-caps off here so we can expose the straps and linkage. Go ahead and loosen them up a little bit. more


Watch Video

11/23/2015 10:46:06 AM



Rola Roof Rack Review - 2012 Dodge Journey- Video

Rola  Roof Rack Review - 2012 Dodge Journey

Today, on our 2012 Dodge Journey, we have our Rola Sports Series Roof Rack, part #59899. We already have our front one installed all the way forward. As you can see, it's as forward as it gets. Now we'll show you how to put the feet on and go ahead and put it on the vehicle. Here we have our foot, we'll just need to make sure our grooves are all lined up and go ahead and slide it on, and then put our end cap on. Now when we measure our distance, we want to measure from the center of our post to the center of our post, and we want to have about 27-31 inches between. Same on both sides, whatever your measurement is. more


Watch Video

11/13/2015 10:51:28 AM



Thule Crossroad Roof Rack Installation - 2012 Dodge Journey- Video

Thule Crossroad Roof Rack Installation - 2012 Dodge Journey

Today on this 2012 Dodge Journey, we're going to do a test fit of a Thule Roof Rack System. We're using a Thule Crossroad Roof-Mounted Foot Pack part no. TH450 and a Thule Square Load Bars part no. THLB50. We're going to start off our crossfit with the roof rack already assembled so just got to place it onto the factory roof rack. Now placement on the roof rack will vary depending on the accessory that you're going to use on top. more


Watch Video

2/28/2012 3:01:01 PM



Thule AeroBlade Crossroad Roof Rack Installation - 2012 Dodge Journey- Video

Thule AeroBlade Crossroad Roof Rack Installation - 2012 Dodge Journey

Alright, today on this 2012 Dodge Journey we're going to do a test fit of Thule Roof Rack System. We will be using a Rapid Crossoad foot pack part number TH450R and the Thule Aeroblades part no. THARB53. Okay. Now we will start off our roof rack already assembled according to instructions so all I got to do is place it on the factory roof rack. The spacing on this roof rack will change according to the different types of accessories you use on top. more


Watch Video

2/28/2012 3:00:21 PM



Rhino Rack Roof Rack Installation - 2012 Dodge Journey- Video

Rhino Rack Roof Rack Installation - 2012 Dodge Journey

Alright, today on this 2012 Dodge Journey were going to install the Rhino Roof Rack, part number SXB4-SILV. Our vehicle is already equipped with the factory roof rack so were going to add our Rhino Rack to the top of that. Very simple to install and were going to start off with our Rhino Rack already reassembled according to the instruction, so we'll just place it on top of the factory roof rack. Ok, next well go ahead and make sure that the crossbar is square with the factory roof rack so we'll measure from the edge on the factory roof rack to the leading edge of the Rhino Rack. In this case were going to use a measurement of 10 inches. Ok, now well go ahead and move on to the second crossbar. more


Watch Video

2/13/2012 1:10:53 PM



  1