Chevrolet Cruze Roof Rack Installation And Review Videos

Inno Roof Rack Review - 2015 Chevrolet Cruze- Video

Today on our two thousand and fifteen Chevrolet Cruze we're going to take a look at the N O Aero bar roof rack. The crossbar part number is I N X B one zero zero dash one zero eight. The N O feet are I N X S two zero zero, and the pad and clamp are I N K five nine nine. Now we have the first one already on. That is crossbar one zero zero. Right here is one zero eight. more

12/17/2015 9:06:06 AM

SportRack Semi-Custom Roof Rack Review - 2013 Chevrolet Cruze- Video

Today on our 2013 Chevrolet Cruz we'll be test fitting the Sportrack Semi-Custom Roof Rack for naked roofs, fifty inches in length, part number SR1010. We'll begin our test fit by placing the front bar onto the front of our roof. We'll then need to measure, according to the fit guide, seven inches from the center of the door jamb to the first part of the foot. We'll make this measurement on both the driver's side and passenger's side of the vehicle to ensure the front bar is correctly in place. We can use the included allen wrench to loosen up the allen bolts to fit the brackets around the roof line. With the clamps in place, we can then again use the included allen wrench to tighten down the clips up against the roof line. Quick tech tip: You'll need to alternate sides when tightening it down so the bar doesn't favor one side of the vehicle. With the front bar in place, we can now place the rear bar onto the rear of our roof and measure the load bar spread. Now the load bar spread is the measurement from the center of the front load bar to the center of the rear load bar. We'll measure twenty-four inches from the center of the front bar to the center of the rear bar on both the passenger and driver's side of the vehicle. This will ensure that both bars are parallel to each other and perpendicular to the roof of our Cruz. more

9/12/2013 9:21:04 AM