Thule Roof Bike Racks Review - 2015 Chevrolet Tahoe- Video
Today on our 2015 Chevrolet Tahoe, we'll be doing a test fit of Thule Sprint. This is going to be for roof racks with T-track systems to mount your bike rack up on top of your roof rack system. As you can see, up on top of our vehicle, we have the Thule arrow blades today and I want to show you how this fits up on top of there. This will be part number TH5669. One the arrow blades, go ahead and rotate the end cap around, pulling the ends off. Next, you can either do this two ways, pulling the entire rubber strip and protective strip out, that protects that T-track from getting any dirt and debris inside, or you can trim it to fit your bike rack. Today we're going to pull it all the way out. Next, we'll take our bike rack, ensuring that the tops are loose, so that out T-tracks guides can fit into the rail like so. more
7/16/2015 5:02:02 PM
Thule Sprint Roof Bike Racks Review - 2015 Chevrolet Tahoe- Video
Today on our 2015 Chevrolet Tahoe we'll be doing a test fit of the Thule Sprint. This is going to be your rooftop-mounted bike rack for a single bike to be fork-mounted. It's going to be part number TH528. We have our bike in place so you can see what it's going to look like once you have it fully assembled and on your vehicle. Now we'll go through a few of the features and show you how it's assembled and put in place. Go ahead and move to the back here and we're going to go into the backwards order of how we would place it on. Go ahead and undo or press in the gray strap button there. more
7/6/2015 6:54:08 PM
SportRack Frame Mount Roof Mounted Bike Rack Review - 2013 Chevrolet Tahoe- Video
Today on our 2013 Chevrolet Tahoe we'll be test fitting the Sport Rack, roof mounted bike rack, Part #SR4611. With the factory roof rack system on our vehicle, we'll begin our test fit by placing our bike rack directly onto our crossbars. Here at the front platform, we'll bring our U-bolt around the underside of our front crossbar fitting the bolts back up through the head of our carrier. We'll secure it by placing a wing nut on each end of our U-bolt. Once we have those tightened down, we can repeat this process for the other side. Here at the rear, we'll place our plastic fitting between our bike rack and our rear crossbar. Then we'll drop our bolts through the top of the bike rack making sure that they go through the holes of the fitting then we'll secure it by tightening down a wing nut on each bolt. more
1/23/2014 11:39:29 PM
Filter Videos
Filter Videos
