Inno Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Speaker 1: Today on our 2013 Hyundai Santa Fe, we're gonna be test fitting the Inno Aero Light 2 Bike Rack, part number INH620. We already have a bike installed on our rack, let's take a closer look and show off some of the features.,Starting at the end here, we do have this open lock portion, and that's where the integrated cable lock is gonna come into play. You simply pull it out, plug it into this portion here, and then lock it into place at the end here, and it does come with two keys.The cradles themselves do move back and forth and side to side and as needed, and the anti sway cradle can fold in and out as needed also. We generally have it folded up when loading and unloading because this makes 10 times easier. It will grip your bike at three points, will have the two straps up at the top, as well as the one in the anti sway cradle. And that's gonna be the one that keeps the bike from moving to far back and forth and causing bike to bike contact.When removing these, you can either push the tabs like this one here on both sides in and remove the entire strip, or such as this case, just one, and that's what I'm gonna do. more
8/29/2018 2:17:46 PM
Swagman Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Speaker 1: Today in our 2013 Hyundai Santa Fe, we're going to be test fitting the Swagman Quad 2+2, two- and four-bike platform rack for 2-inch hitches, part number S64692. We already have a bike installed on our rack. Let's go ahead and take a closer look here.This is a pretty unique bike rack in that it can fit both motorhomes and vehicles, so you can take this with you on the road with your RV or utilize it with your home vehicle as well. Also, you can convert this from a four-bike to a two-bike as well by removing the bolt up in the center here and removing this last section of two bikes out.It's going to grip your bike at three points. We're going to have two wheel straps on either end, and the wheel cradles themselves are adjustable by loosening and tightening the knobs here and shifting them back and forth to accommodate bikes of different sizes or wheel bases.And then up at the top, we're going to have this padded frame hook. Now with the padded frame hook, it's going to help protect the frame of your bike once you're traveling to make sure there's no scratches on it even while in the install process. more
8/10/2018 10:39:17 AM
Swagman Hitch Bike Racks Review - 2013 Hyundai Santa Fe S64351- Video
Today our 2013 Hyundai Santa Fe, we'll be doing a test with a Swagman original, folding three bike rack. That's part number F64351. I've already got it plugged into the back of the Santa Fe here as you can see. Just to give you a good idea of what it looks like. It can be used for an inch and a quarter or two inch hitches. We've got out adapter on there for our two inch receiver here today. more
7/13/2015 1:17:01 PM
Curt Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Today on our 2013 Hyundai Santa Fe, we're going to be doing a test fit of the Curt Premium 4. This would be your hanging style four bike rack. Part number C18064. As you can see, it's going to have your 2" shank for your 2" receivers only. We're already going to have our bike up here on our platform so you can see what it's going to look like once you have it fully assembled and on the back of your vehicle. Let's start off by getting a few measurements starting with our closest distance first. more
7/6/2015 6:49:07 PM
Inno Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Today on our 2013 Hyundai Santa Fe, we're going to be doing a test-it of the Inno Tire Hold 3. This is going to be your platform-style three bike rack, part number INH305-306. As you can see, we've already got our bike up here on our platform, so you can see one, what it looks like once you have it fully assembled and on the back of your vehicle. This is going to come with your inch and a quarter, as well as your two inch shank, for you class one and two and three receivers. Just keep in mind that with your class one receivers that you're only going to be able to carry up to two bites and that is per your hitch's weight requirements. All right, let's start off by getting a few measurements. Our closest distance will be our first measurement. more
7/6/2015 6:41:06 PM
SportRack Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Today on our 2013 Hyundai Santa Fe we're going to be doing a test fit of the Sport Rack Ridge Swing. This is going to be your hanging style five bike rack, part number SR2415. As you can see, we've already got a bike up here on our cradle arm so you can see what it's going to look like once you have it fully assembled on the back of your vehicle. It does come with a two inch shank for your two inch receivers only and it's going to be connected to our receiver using an anti-rattle bolt. Let's go ahead and move it out, right after we get a few measurements. Our closest distance will be first from the front side of this t-handle and screw here on the front side to the back side of the bumper. About three and three quarter inches. more
7/6/2015 6:06:43 PM
SportRack Hitch Bike Racks Review - 2013 Hyundai Santa Fe SR2403- Video
Today on our 2013 Hyundai Santa Fe, we're going to be doing a test fit of the SportRack 3 hanging style three bike rack, part number SR2403. As you can see that we already have our bike up on our platform and on our cradle arm so you can see what's its going to look like once it's fully assembled and in place on the back of your vehicle. Now this rack does come with an inch and a quarter shank as well as that two inch adapter so you can use it with your class 1, 2 and 3 receivers. Just keep in mind that with your class 1 receivers that you're only able to carry up to two bikes and that is per your class 1 hitch requirements and weight specifications. The two inch adapter and an inch and a quarter shank are going to be attached using a anti-ratabolt down here at the bottom to reduce a lot of the sway, rattle and wobble that you will have. We'll show you that here in a few minutes, right after we get a few measurements. Our closest distance is going to be our first measurement and that's going to be about two and one-quarter inches from the backside of the bumper to the front side of this flange bracket in here. more
7/6/2015 6:06:23 PM
Thule Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Today on our 2013 Hyundai Santa Fe we will be test fitting the Thule Vertex tilting 4-bike rack. That's part number TH9029XT. This can be used for either 1-1/4" or 2" hitches. We've got a 2" hitch here today so we've got our adapter on there. We can go ahead and begin by inserting our shank into our receiver until our pinholes line up. That looks pretty good there. more
2/17/2015 9:13:41 AM
Thule Hitch Bike Racks Review - 2013 Hyundai Santa Fe th9031xt- Video
Today on our 2013 Hyundai Santa Fe, we will be test fitting the Thule Vertex Swing 4-Bike Rack. That's part #TH9031XT. This is for 2 inches, we have got a 2 inch receiver here today. We can go ahead and begin by inserting our shank into our receiver and line our pin holes up. Once we get that lined up, we will then take our included anti-rattle bolt and thread that through. Once we get that hand tightened, we will grab our socket wrench and we will tighten that the rest of the way down.The nice thing about this anti-rattle bolt is it's going to help reduce the play in the rattle within our hitch and our bike rack, once it's tight. more
2/16/2015 3:47:21 PM
Thule Hitching Post Pro Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Today on our 2013 Hyundai Santa Fe we're going to do a test fit on the Thule Hitching Post Pro. This is a 4-bike folding and tilting-style rack. It's designed for use with 1-1/4" or 2" receivers. Part number on it is TH934XTR. To begin our test fit we slide the shank of the rack right into the receiver tube of our hitch. We want it to go in far enough to line up our threaded hole with our hitch pinhole. Once we have those in line we're going to take our anti-rattle bolt which is provided. more
9/25/2014 8:54:18 AM
Thule Helium Aero Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Today on our 2013 Hyundai Santa Fe Limited, we're going to do a test fit on the Thule Helium Aero. This is a folding and tilting 2 bike rack. They've designed it so we can use it with 1 1/4 or 2 inch hitches. The part number on it is TH9042. If you need a 3 bike, we do have that available as well, part number is TH9043. The black attached pin here on the right side, we'll hold out and we'll slide the shank of the rack right into the receiver tube of our hitch. We need to slide it in far enough so that our pin goes through our hitch pin hole and back into the shank of the rack. more
9/24/2014 8:38:51 PM
Saris Freedom SuperClamp Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Today on our 2013 Hyundai Sante Fe we're going to do a test fit on the Saris Freedom SuperClamp. This is a platform-style 2-bike rack. It's designed for use with 1-1/4" or 2" hitches. The part number on it is SA4025. To begin our test fit we'll slide the shank of the rack right into the receiver tube of our hitch. We'll then line up our threaded hole with our hitch pinhole. Those in line, we'll take our anti-rattle bolt, which is provided. more
9/3/2014 11:50:30 AM
Yakima FullTilt Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Today on our 2014 Hyundai Santa Fe, we're going to do a test fit on the Yakima FullTilt. This is a folding and tilting 4 bike rack. It's been designed so we can use it with 1 1/4' or 2 hitches. The part number on it is Y02462. Now, we also have this available in a 5 bike configuration. That part number is Y02463. more
8/29/2014 10:59:54 AM
Saris Thelma Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Today on our 2013 Hyundai Santa Fe we're going to do a test fit on the Saris Thelma. This is a platform-style 3-bike rack. It's designed for use with 1-1/4" and 2" hitches. For convenience it's going to fold up nicely against the rear of your vehicle when it's not in use. Part number on it is SA4239B. To begin our test fit we need slide the shank of our rack into the receiver tube of our hitch. We'll slide it in far enough so that our threaded hole lines up with our hitch pinhole. more
8/29/2014 9:43:00 AM
Saris Bike Porter Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Today on our 2013 Hyundai Santa Fe, we're going to take a look at the Saris Bike Porter, this is a folding and tilting 4-bike rack. They've designed it for use with 1-1/4 inch or 2 inch hitches, the part number on it is SA404B. They do offer this in a 2-bike configuration as well, that part number is SA402B. Now to begin our test fit, we're going to slide the shank of the rack in until we line up our threaded hole with our hitch pin hole. Then, take our anti-rattle bolt and slide that in, begin threading it through rather. We will want to put this in from the driver side to the passenger side, so just keep that in mind when you're doing it. With it hand-tight, you can see still lot of movement, a lot of play in our connection, so we're going to take our wrench, and we'll tighten this on down. more
8/29/2014 9:40:47 AM
Saris Axis Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Today on our 2013 Hyundai Santa Fe, we're going to do a test fit on the Saris Axis. This is a folding and tilting 3-bike rack. They designed it so we can use it with inch and a quarter or two inch hitches. The part number on it is SA843B. To begin our test fit, we need to slide the shank of the rack into the receiver tube of our hitch. We need to line up our threaded pinhole with our hitch pinhole. Then we can thread in our anti-rattle bolt which is provided. more
8/29/2014 9:40:19 AM
Swagman Titan Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Today on our 2013 Hyundai Santa Fe we're going to do a test fit on the Swagman Titan. This a folding and tilting 4-bike rack. They've designed it so we can use it with 1 1/4" or 2" hitches. The part number on it is S63410. To begin our test fit we'll slide the shank of the rack into the receiver tube of our hitch. We want to put it in far enough so that our threaded hole is going to line up with our hitch pin hole. more
8/29/2014 9:37:02 AM
Kuat NV Hitch Bike Racks Review - 2013 Hyundai Santa Fe- Video
Today on our 2013 Hyundai Santa Fe we're going to do a test fit on the Kuat NV. This is a platform-style 4-bike rack. It's designed to tilt up against your vehicle and also away from it. Part number on it in the black and chrome that we see here, part number is N105-107. Now this is also available in a gun metal gray and orange. That part number is N101-103. Our rack's been designed for use in 2" hitches, so to begin our test fit we'll slide the shank of the rack right into the receiver tube of our hitch. more
8/29/2014 9:17:04 AM
