Prorack 4 Hitch Bike Rack Review - 2014 Dodge Avenger- Video
Today in our 2014 Dodge Avenger, we'll be test fitting the Prorack Tilting 4 Bike Rack for 1 1/4 inch and 2 inch hitches, part # PR8062404. To begin our test fit, we'll slide the shank of the bike rack into the receiver tube of our hitch, line up our pinholes, thread in our anti rattle bolt and tighten it down with a wrench. We'll then secure it with the provided clip. In this position, you have 7 3/4 inches worth of ground clearance. The closest point of the rack to our vehicle is about 3 3/4 of an inch away. Overall, we've added about 27 1/2 inches to the length of the Avenger. With our mast in the upright position, we do have access into the trunk. However, by pulling the big pin and clip at the base of the mast, we can tilt the rack away from our vehicle giving us even more access. more
4/17/2014 8:27:11 PM
Thule Hitching Post Pro Hitch Bike Rack Review - 2013 Dodge Avenger- Video
Today on our 2013 Dodge Avenger, we'll be test fitting the Thule Hitching Post Pro Part Number TH934XTR. To begin our test fit, we'll slide our bike rack shank into the hitch after removing the 2 inch adapter from our shank. We can then line up the hitch pinhole and install and tighten down our anti-rattle bolt. With our bolt tight, our bike rack is secure to our vehicle. Now we can go ahead and go over a few clearance measurements. Our ground clearance of the bike rack is 9 inches and from the closest point of the bike rack to the closest point of the vehicle is about 3 1/2 inches. more
6/13/2013 8:13:54 AM
Swagman Titan Hitch Bike Rack Review - 2013 Dodge Avenger- Video
Today on our 2013 Dodge Avenger, we'll be test fitting the Swagman Titan 4-Bike Carrier, for both 1-1/4 and 2-inch Hitches, Part Number S63410. This carrier will fit both 1-1/4 and 2-inches hitches using the included adapter. However, when using that with a Class 1 hitch, you're limited to only two bikes. We went ahead and remove the two-inch adapter, so we're ready to fit the bike carrier to our vehicle. We'll install the bike rack shank into the hitch, lineup the hitch pinhole and install our anti-rattle bolt. With our bolt tight, we can go ahead and make sure that the bike rack is secured to our vehicle. Now, we'll go over a few measurements. Our bike rack has a ground clearance of 10 inches. more
6/13/2013 8:06:58 AM
Filter Videos
Filter Videos
