Curt Hitch Bike Racks Review - 2013 Chrysler Town and Country- Video
Today on our 2013 Chrysler Town and Country, we're going to be doing a test fit of the Curt Premium 4. This is going to be your hanging-style for a bike rack. It's going to be Part #C18064. This comes with your 2 inch shank for your 2 inch hitches only. And it is a nice tilting model. As you can see, we've already got a bike on here, so you can see what it would look like and how it would fit, once it's all complete. We're going to start off by getting a few measurements, that way you know where your tolerances are for your vehicle. more
5/18/2015 8:28:11 AM
Saris Freedom Hitch Bike Racks Review - 2013 Chrysler Town and Country- Video
Today on our 2013 Chrysler Town and Country, we're going to be test fitting the Saris Freedom, 4-bike platform style rack for 2-inch hitches, part number SA4414B. We'll begin our test fit by inserting the shank of the rack into the hitch on our vehicle. You'll want to watch for the hitch pinholes to line up. With those in line, we'll take the threaded anti-rattle hitch bolt and thread that into place. We'll go ahead and get this hand tight and then we can finish it off with our wrench. Tightening this down will help take any extra play out off the rack helping to eliminate movement overall going down the road. more
7/7/2014 9:32:55 AM
Saris Freedom SuperClamp Hitch Bike Racks Review - 2013 Chrysler Town and Country- Video
Today on our 2013 Chrysler Town & Country, we're going to be test fitting the Saris Freedom super clamp, two bike platform style rack, part number Sa4025. We'll begin our test fit by inserting the shank of the rack into the hitch on our town and country. You'll want to watch for the hitch pin holes to line up. With those in line we can take the provided hitch pin lock and thread that into place. Go ahead and get that hand tight and then we can finish it off with our wrench.Tightening this down will help take any extra play out of the shank of the rack, helping to eliminate movement while going down the road. With that tightened down, we'll snap our lock on to the other side, then turn it to the lock position, that way it snaps on. more
7/3/2014 5:08:40 PM
Saris Axis Hitch Bike Racks Review - 2013 Chrysler Town and Country- Video
Today on our 2013 Chrysler Town and Country, we're going to be test fitting the Saris Axis 3-bike rack for inch and a quarter and two inch hitches. Part number SA843B. We'll begin our test fit by inserting the shank of the rack into the hitch on our vehicle. We'll want to watch for the hitch pin holes to line up. With those in line we can insert the included anti-rattle hitch lock. We'll go ahead and thread that down hand tight. Once we have that hand tight we can finish it off with our wrench. more
7/3/2014 4:50:27 PM
Yakima FullTilt 4 Bike Rack Review - 2013 Chrysler Town and Country- Video
Today on our 2013 Chrysler Town and Country we're going to be test fitting the Yakima FullTilt 4 Bike Rack for 1-1/4- and 2-inch hitches, part #Y02462. We'll begin our test fit by inserting the shank of our rack into the hitch on our Town and Country. You may want to keep a hand on the anti-rattle device to make sure it slides in without binding up. You'll notice the self-locking hitch pin. We'll go ahead and just push that in until it goes into the appropriate hole. We can then tighten the anti-rattle device here at the base of the rack. more
7/3/2014 7:10:02 AM
Saris Porter 4 Bike Rack Review - 2013 Chrysler Town and Country- Video
Today on our 2013 Chrysler Town and Country we're going to be test fitting the Saris Bike Porter four bike rack for inch and a quarter and two inch hitches part number SA404B. We'll begin our test fit by inserting the shank of the rack into the hitch on our Town and Country. You'll want to watch for the hitch pinhole to line up. With that in mind we'll go ahead and take the included threaded anti-rattle hitch bolt and thread that into place. We'll go ahead and get that hand-tight and then we can finish it off with our wrench. Tightening this down helps to take the extra play out of the shank of the rack, which helps to eliminate movement overall as you're going down the road. We'll attach our clip to the other side and grab a few measurements. The closest point of the rack to the vehicle is going to be here at the back of the mast. That measures about five and a half inches. more
7/3/2014 6:51:24 AM
Hollywood Racks Sport Rider Recumbent Bike Rack Review - 2013 Chrysler Town and Country- Video
Today on our 2013 Chrysler Town and Country, well be test fitting the Hollywood Rack Sport Rider two bike carrier for recumbence, part number hr1000r-1G. Now to begin our test fit, well slide the shank of the carrier into the opening of the hitch, line up our pin holes, thread our anti-rattle bolt through the pin holes and tighten them with a wrench. Now well go ahead and go over some clearance measurements to see how the bike carrier and this vehicle will fit together. There is about 11 of ground clearance, the closet part of the vehicle to the closet part of the carrier is about five inches. We have added about 27 to the overall length of the vehicle. To access our cargo area well pull the three pins at the bottom of the carrier to unfold the platform and the mast, this will allow us to have access to our cargo door. more
2/14/2013 4:41:37 PM
