Thule Vertex 4 Hitch Bike Rack Review - 2011 Cadillac SRX- Video
Today on our 2011 Cadillac-SRX we'll be test fitting the Thule Vertex Hitch-Mounted Hanging 4-Bike Rack, Part Number TH9029. Well begin our test fit by sliding the shank of the bike rack into the opening of the hitch. After lining up the pinholes well thread in our anti-rattle bolts, and then tighten it down using a wrench. With the bike rack secured well go over a few clearance measurements to see how the two fit together. We have about 16 of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about 4 away, and we've added about 13 to the overall length of our Cadillac. Well now lift up on the gray lever at the top of the mast and swing the cradle arms of the bike rack outward. more
9/18/2014 12:08:57 PM
Kuat NV Hitch Bike Rack Review - 2012 Cadillac SRX- Video
Today on our 2012 Cadillac SRX we'll be test-fitting the Kuat NV Platform Style Aluminum 2-Bike Rack, part number N101. We'll begin our test fit by sliding the shank of the bike rack into the opening of the hitch. We'll insert our pin into the pin holes, securing the lock on either side. Then we can turn the black knob at the back of the shank to engage the anti-rattle device. With the bike rack secured, we'll go over a few clearance measurements and see how the two fit together. We have about 15 1/2 inches of ground clearance. The closest part of the bike rack to the closest part of the vehicle is about 4 1/2 inches away. We've added about 15 inches to the overall length of our Cadillac. We can now lift up on the orange lever at the base of the bike rack and tilt the platform down. more
1/7/2014 3:40:09 AM
Hollywood Racks Traveler Tow n Go Bike Rack Review - 2012 Cadillac SRX- Video
Today on our 2012 Cadillac SRX we will be test fitting the Hollywood racks traveler tow-n-go hitch mounted three bike rack, part number HR135. For today's test we will be using the hidden hitch ball mount with an extra long shank, part number 80232. We will begin our test fit by sliding the shank of the ball mount into the opening of the hitch. We can then secure it with the pin and clip. Keep in mind the ball mount and hitch pin and clip are sold separately. Now when using the hitch pin there is going to be some wobble. more
1/7/2014 3:39:50 AM
Filter Videos
Filter Videos
