bing tracking image

Jeep Grand Cherokee Accessories and Parts Installation And Review Videos

     

Rhino Rack Roof Rack Review - 2014 Jeep Grand Cherokee- Video

Rhino Rack  Roof Rack Review - 2014 Jeep Grand Cherokee

Today on our 2014 Jeep Grand Cherokee, we're doing a test fit of the Rino Rack Arrow Bar Roof Racking System. The crossbars are RRVA126V-2. The foot pad is RLCP27. And the foot pad adapter is RRVA-FK2-2. Now we already have the first one already on. I'm going to show you how to put the second one on. We have our crossbar, we have our foot pad, and our pad for our fix point. more


Watch Video

1/14/2016 8:41:34 AM



Inno Accessories and Parts Review - 2015 Jeep Grand Cherokee- Video

Inno  Accessories and Parts Review - 2015 Jeep Grand Cherokee

Today on our 2015 Jeep Grand Cherokee, we're going to be doing a test fit of the Inno medium-sized fairing. This fairing is going to be 40 inches long. That's him coming now. Nice black finish, attaching to our square bars from Inno as well. We have 2 of the feet already in place. We're going to show you how to do the middle one and how to attach it. more


Watch Video

7/6/2015 5:41:06 PM



Trailer Brake Controller Installation - 2012 Jeep Grand Cherokee- Video

Trailer Brake Controller Installation - 2012 Jeep Grand Cherokee

Rate your transcript OrderClientKevin BrossRef #20497Order #TC0891082758 Today on our 2012 Jeep Grand Cherokee, we'll be installing our Tekonsha Prodigy P3 brake controller, part number 90195 with a direct fit wiring harness to connect directly to the manufacturer's brake controller port, part number 3045-P. Now, to begin the install of our new brake controller, on the driver side above the gas and brake pedal is a carpeted paneling that will need to be removed. To remove it, there are two push pin fasteners that will pry out that will release the carpeting, swing pull it out and set it aside for installation later. Next, above the emergency brake pedal, the white box is a grey plug. Grey plug will match the grey connector on the end of our new brake controller pigtail. We'll go ahead and put our grey plug on the pigtail into the grey socket on the manufacturer side. Now, once we push the connector into position and it locks in place, we'll go ahead and start the routing wires and securing it up underneath the dash. more


Watch Video

8/13/2014 12:50:06 PM



  1