Optronics GloLight LED Trailer Tail Light Review and Installation- Video
Hi, there neighbors. Today, we're going to be taking a look at Optronics GloLight LED Stop, Turn and Tail Trailer Lights. And this is what our lights look like when they're installed. I've currently got the tail lights turned on and you can see that here with the outer ring. The center section is for your stop, as well as your turn circuits. The 22 LED's inside are protected with the polycarbonate housing. more
8/14/2019 1:32:21 PM
Optronics GloLight LED Trailer Tail Light Review and Installation STL111RFMB- Video
Hi there, neighbors. Today we're going to be taking a look at Optronics GloLight LED stop, turn, and tail trailer lights. Here you can see our lights installed. I've got the tail lights on now, which is going to be our outer ring, but our stop and turn signals is going to be the inner strip. Here we have our stop signals as well as our turn signals. It features a polycarbonate housing that's sonically sealed, keeping it waterproof. more
8/14/2019 1:27:55 PM
Optronics GloLight LED Trailer Tail Light Review and Installation STL111RCMB- Video
Hi there neighbors, today we're going to be taking a look at Optronics glow light, stop turn, and tail trailer lights. And this is what our lights look like when they're installed. Our taillights are going to be our outer band like you see here, and our center strip is going to be for our brake lights, as well as our left and right turn signals.These are going to be your standard oval 6 1/2 x 2 1/4" lights. So they're going to fit right into the existing holes on your trailer. Now, if you don't have oval holes on your trailer, you can purchase brackets here at etrailer.com, Optronics has brackets. And we also have the rubber grommets available to keep your lights secure inside the bracket.It has a polycarbonate casing that's sonically sealed. more
8/14/2019 1:27:40 PM
Optronics GloLight LED Trailer Tail Light Review and Installation STL111RCFB- Video
Hi there, neighbors. Today we're going to be taking a look at Optronics GloLight LED Stop, Turn, and Tail trailer lights. These lights are easy to install. They simply mount right onto your trailer, and they pre-drilled holes you can run either nut and bolt through or self-tapping screws to keep it in place. This is going to be more secure than the grommet style, where it just pokes in there, and the grommet holds it in place. They work with your standard three-wire pigtail. more
8/14/2019 1:27:27 PM
Review of Peterson Trailer Lights - Red Clearance Lights - 423000- Video
Ellen: Hey everyone. I'm Ellen here at etrailer.com. And today we're going to be taking a look at the Peterson Clearance or Side Marker Trailer Light with Reflector. This is going to be an incandescent bulb, and it's going to give you that lighting function for your trailer, whether that's going to be your side marker or your rear clearance light. It does have a red lens going over a white incandescent bulb. And just has this plastic base that's molded to allow your hardware to go through. more
8/12/2019 9:42:21 PM
Review of Optronics Trailer Lights - Clearance Lights - MCL131RC210B- Video
Ellen: Hey everyone. I'm Ellen here at etrailer.com and today we're going to be taking a look at the Optronics mini red LED clearance or side marker light. Now this is going to be a great upgrade for any incandescent lights that you might have on your trailer or camper. It's going to give you that red light for any kind of clearance lights, especially on the back of your trailer. This is a P2 rated light, so they're basically .. That just means that it can only be seen from a certain angle, so it doesn't work as a clearance and a side marker light. more
8/8/2019 8:57:19 PM
Optronics Fusion LED Combination Tail Light Bar Installation- Video
Hi there, trailer owners. Today we're going to be taking a look at Optronics Fusion LED Tail Light Bar.They're available with either a clear lens and red LED, or with the red lens, like we have here.I would also recommend that you pick up Optronics's chrome bezel for the Fusion LED Light Bar. This is going to encase the light to help protect it, as well as giving it a nicer look when it's installed.What I really like about this light is that it's a combination light that has all of your lights in one nice little assembly. It makes it much easier to install, and it's long, large size will make it stand out behind your vehicle when going down the road, so you can be sure that people behind you can see your intentions.Of the lights that it has available, includes a tail light, which is going to be your dimmer red lights, a brake and turn signal light, which is going to be brighter red lights extending all the way down, as well as a backup light, which is a nice little addition to your trailer, particularly if you have a trailer like we do here, where we have a lot of gear stacked up high, so it's hard to see behind you, and the backup lights on your truck really aren't going to do you much good because you're blocking all that light. We can now get that light back here and be able to see what we're doing at night, backing up.The light measures 20 and a half inches long by one inch wide and three-quarter inches deep. Inside we'll have 19 LEDs providing us with our lights.The tail light assemblies are sonically sealed so they're going to be completely water tight, so they're also going to be great for marine applications.These lights make a great upgrade from incandescent to LED, as LEDs typically last much longer than incandescent lights, and they also draw less power and run cooler. more
7/16/2019 9:42:19 AM
Review of Bargman Trailer Lights - Tail Lights - 30-92-107- Video
Today we're going to take a look at the Bargman five-function trailer tail light with the red and the clear lens. Now, this is an incandescent trailer light that'll serve five function. On the bottom, here, it'll do stop, turn, and tail. Right up here on each corner is a rear reflex, and, in the middle, where the clear lens is, is a backup light. It does have nice radius styling, helps provide a nice smooth look. The sockets they use for the bulbs, they are corrosion resistant bulb sockets to protect the bulbs. more
7/15/2019 2:52:14 PM
Review of Optronics Trailer Lights - License Plate Lights - LPL41CB- Video
Today we'll be taking a look at the Optronics LED Trailer License Plate Light. This is going to illuminate your license plate when you're out on the road, so that you can stay within compliance and also so other drivers can see your license plate and you don't have any issues when you're going down the road. It's a nice replacement for any kind of existing light. Since it's going to have LEDs in it, it's going to last longer and you pretty much don't have to worry about any kind of maintenance with this, since we don't have to worry about any kind of brittle filaments that can go bad. The LEDs are going to last much longer and you'd have no bulbs to replace.It also has a brighter output with less power. We'll have a durable polycarbonate lens and housing. more
7/11/2019 1:53:17 PM
Optronics LED License Plate Light Review and Installation- Video
Randy: Hey guys, it's Randy here at etrailer.com. We get inquiries from customers all the time about different lights and how to get their trailer set up. Today we're going to be taking a look at a license plate light. This is required in most areas to illuminate your license plate so it can be seen.The one we have here today is from Optronics. This is going to be an LED light, so it gives us cleaner and brighter light, and they tend to last a lot longer than your incandescent lights. You're going to see mainly in trailers nowadays when people go to rebuild them they start switching these lights out so they can get good, nice, clean, bright looking and fresh lights when comparing those to the incandescent type.This one in particular is going to be one of the better looking license plate lights that we have here on offer at etrailer. more
7/9/2019 8:12:39 AM
Review of Peterson Trailer Lights - Clearance Lights - 422400- Video
Today we'll be taking a look at the Peterson Mini Light side marker and trailer light. This is an incandescent light that serves both as a clearance and side marker light. It's a surface mount light. Comes with a little bracket attached, and has this snap-in base.If you ever need to change that bulb, you can just come to this little tab on the side, get your fingers in there, and kind of pry it out. Then do the same on the other side. And then you can remove that lens cover of that lens and get access to the bulb.This bulb type is a 194193, and you'll just wiggle that to get it out. more
7/5/2019 2:07:19 PM
Review of Peterson Trailer Lights - Clearance Lights - 169R- Video
Today we'll be taking a look at the Peterson Piranha LED clearance or side marker trailer light. This is a submersible light sealed with some epoxy on the back here to keep our diodes protected from any kind of water or debris from getting in there and causing any damage. You can see it's a nice thick epoxy, so we don't worry about anything getting in there and causing any issues.Wire coming out of those diodes. We'll have our black wire for power, white wire for ground. And this can be used with a bracket. It's just as a surface mount bracket that is sold separately here at Etrailer.com. more
7/5/2019 1:57:30 PM
Review of Peterson Trailer Lights - Clearance Lights - 169A- Video
Today we'll be taking a look at the Peterson Piranha LED clearance or side marker trailer light.This is a submersible light since it's epoxy sealed, so that going to keep all our diodes from any kind of corrosion or any kind of damage. That means we can use this on a marine trailer anytime we're going in and out of the water, or just any other trailer that we want to have an amber clearance light. And we'll know that it's going to be protected from any kind of dirt or debris from getting in there and causing issues.Those LEDs are also going to have an advantage over the old incandescent bulb styles since there's no brittle filaments that can break with these. There's no bulbs to replace. They're virtually maintenance free once you install them in. And they're going to last a lot longer, have a lower power draw, and give you typically a brighter light than you would get with your incandescent bulb. more
7/5/2019 1:37:21 PM
Review of Peterson Trailer Lights - Liscense Plate Lights - M400- Video
Today we'll be taking a look at the Peterson trailer license plate light. This is going to help to illuminate your license plate on your trailer to help stay within compliance when it's mounted above that license plate.It's just a small incandescent bulb inside there. To replace that bulb, just need to back out the Phillips head screw up at the top, and then that'll just assemble the whole thing. It's really just held in place by that little guy. Then we can pull apart our housing. We'll see in there we'll have a vibe bar or V bar socket. more
7/5/2019 12:42:20 PM
Review of Peterson Trailer Lights - Clearance Lights - 424200- Video
Today we'll be taking a look at a Peterson Armored Clearance and Side Marker Trailer Light. Now, this is going to help your trailer to stay visible and DOT complaint by giving you that clearance and side marker light for your trailer. It's housed in the durable steel bracket. So, it's going to keep our light protected and also sort of finish off the look and make it look sort of more beefy than your typical lights.It has an incandescent bulb in there. And to replace that, you'll just need to back out these two screws on either side to get access to that bulb. This works with 12-volt DC systems. more
7/5/2019 12:32:20 PM
Review of Peterson Trailer Lights - Clearance Lights - 424000- Video
Today we'll be taking a look at the Peterson Armored Clearance and Side Marker Trailer Light. This is going to give you better visibility for your trailer, since it's going to allow other drivers to see where you are, and also stay safe and DOT compliant.It's going to be a metal housing to keep our light protected, and that's also going to be a surface mount design, so our ground connection will be made by that metal surface making contact with our trailer, so we'll just have one wire to actually connect. It does not come with any mounting hardware for this, so you will have to pick some up on your own. It has an incandescent bulb in there, and to replace that you'll just need to remove the two Phillips head screws in that housing.The nice thing about this light is that it does have a viber socket, which is kind of like a little rubber socket to help absorb any road shock to help make that light last a little bit longer, so you don't have to worry about replacing it prematurely. So it's just kind of a softer material to help absorb some of that vibration. Lens just goes right back over it, put our two tabs in place, and then we can tighten those screws down.The bulb type for this light is 168, which you can find pretty commonly. more
7/5/2019 12:12:20 PM
Review of Peterson Trailer Lights - Interior Lights - Utility Lights - 433600- Video
Today we're going to take a look at the Peterson Trailer interior dome light with the switch and the clear lens. Now this is an incandescent dome light that'll provide bright white light to illuminate your trailer's interior. Has this push button nylon switch at the top here that'll control the on and off function. Does use incandescent bulbs that can be easily replaced. Does use a bulb type 1141. It's a durable steel base with the screw on lens and it has a clear lens over an incandescent bulb. more
7/3/2019 3:32:32 PM
Review of Optronics Trailer Lights - Tail Lights - STL108RB- Video
Today we're going to take a look at the Glolight Square LED Combination Tail Light for Trailers under 80" wide. This one's for the passenger side.Now this trailer taillight will serve six functions on trailers less than 80" wide. Serves as a tail light, a brake light, a turn signal, a rear reflector, a side marker light, and a side reflector. The Glolight lens on this will create a nice solid light pattern with the smooth appearance. The outer band right here of LEDs, functions as your tail light. And then the center portion of the red LEDs will act as a turn signal to brake light.I am going to hook this up to some 12-volt power at the end of this video, just to show you what it looks like. more
7/3/2019 3:13:33 PM
Review of Peterson Trailer Lights - Clearance Lights - 425000- Video
Today we're gonna take a look at the Petersen clearance or side marker trailer light with the red lens and the chrome plated base. Now this is an incandescent trailer light that will function as a clearance or side marker light when properly mounted. The premium bulb provides up to 15,000 hours of light, and it's all in this durable chrome plated ABS housing. Has the red lens that's over the incandescent bulb, and this light is compatible with 12 volt DC systems. It is a flush mount design to the trailer, with the included stainless steel screws, and it requires about a one and a quarter inch diameter socket hole for a flush mount installation. It is a twist in socket. more
7/3/2019 12:02:19 PM
Review of Peterson Trailer Lights - Tail Lights - 431800- Video
Today, we're going to take a look at the Peterson Trailer Round Stop, Turn, And Tail Light with the red lens for the passenger side. Now, this is a combination trailer tail light that'll serve three functions when it's properly mounted. Tail light, stop light, and turn signal light. Does use an incandescent bulb that can be easy to replace. It's a bulb type 1157. It's all in a durable polycarbonate housing with a screw on lens and the red wrap over lens will cover the incandescent bulb. more
7/3/2019 10:02:15 AM
Review of Peterson Trailer Lights - Tail Lights - 411SC- Video
Today, we're going to take a look at the Peterson trailer backup light with the stainless steel housing and the clear lens. This is an incandescent trailer light that'll provide a backup light function for trailers or utility trucks. It does use an incandescent bulb, can be to replace. It's a bulb type 1156. Has this nice clear lens over the incandescent bulb, and the lens is held in place by this metal retainer ring on the outer edge, here. That's how you'll access to replace the bulb. more
7/3/2019 9:57:21 AM
Review of Peterson Trailer Lights - Tail Lights - PM425-3- Video
Today we're going to take a look at the Peterson trailer stop, turn, and tail light with the steel housing and the red lens. This is a combination trailer taillight that'll serve three functions when it's properly mounted. It'll serve as a tail light, a stop light and a turn signal light. The socket that the bulbs installed in is a vibar socket which absorbs any road shock and vibration to prolong the bulb life and it does use an incandescent bulb that can be easily replaced. The bulb type is 1157. If you notice it has this red lens over the incandescent bulb and the lens is held in place by this metal snap ring. more
7/3/2019 9:52:21 AM
Review of Peterson Trailer Lights - Clearance Lights - 422600- Video
Today we'll be taking a look at the Peterson Mini Light clearance and side marker trailer light. This is going to be a rectangular incandescent trailer light bulb. We'll have our housing which provides us with the ground connection there whenever we put in our hardware. Then we'll have our wire to connect to the back.Has just a plastic base. It's compatible with 12 volt DC systems and then it just surface mounts to your trailer. These little notch cut out and that bracket's for our wiring can go out couple different ways here. more
7/3/2019 12:22:19 AM
Review of Peterson Trailer Lights - Clearance Lights - M154KR- Video
Today we'll be taking a look at the Peterson Clearance and Side Marker Trailer Light Kit. This is going to include your light and the mounting bracket to get this installed. That mounting bracket provides us with a housing for our light and then it also has our ground connection there and the wiring coming off of it so we can get everything hooked up and lit. This is compatible with 12 volt DC systems. It has bulbs that are incandescent, but it is a sealed waterproof housing and lens unit, so it is submersible. You can use this on your boat trailers and it'll still stay lit without it getting any damage from the water. more
7/3/2019 12:12:24 AM
Review of Peterson Trailer Lights - Reverse Light - 393C- Video
Today we'll be taking a look at the Petersen trailer backup light. This is going to be an incandescent, rectangular style light with a clear lens to help you get your trailer backed up into a parking space or just to illuminate the area behind you. It's going to be a surface mount lights. That basically means that our ground connection is made by this metal plate making contact with our trailer or the screws making contact. Now these screws come with it and that's to attach the lens to the light housing. As far as mounting hardware, you'd use these four holes along the perimeter, but it does not come with any hardware for that, so you will have to pick up something on your own, whether that's nuts and bolts or some type of other self-tapping screw. more
7/2/2019 11:52:18 PM
Hopkins Smart Light Submersible Trailer Tail Lights Review and Installation- Video
Jake: Hey guys, it's Jake here with the etrailer. Today we're going to be taking a look at and I'm going to show you how to install these Hopkins replacement taillights. These are going to be fully submergible taillight, so it's going to work great for your landscaping trailers, like we have here, or if you have a jet ski trailer or a boat trailers that you need a replacement light for.These lights are going to come in a kit of two, if you need two lights, or you can buy just the left or the right.The nice part about buying the kit of two taillights is that you're going to get this tester. This is going to plug into the four pole on your trailer and you're going to be able to see if all of your lights are working properly.The light housing itself is going to have a sturdy plastic construction and it'll have a rubber gasket around both the backlight and the side marker light to be able to help to keep water out.What's nice about this kit is that the left rear taillight is going to have an integrated white light underneath shining down on your license plate to make sure others can see your license plate while driving at night.Now that we've gone over some of those features, let's go ahead and show you how easy it is to get installed. We're going to start by removing our taillights to get our new ones in place. We'll take our white wire with our ring terminal on it, slide it over one of the studs on the back of our light. more
7/2/2019 8:28:52 AM
Hopkins Smart Light 8 Function Trailer Tail Light Review and Installation- Video
Jake: Hey, guys. It's Jake here with etrailer.com. Today we're going to be taking a look at, and I'm going to show you how easy it is to swap your factory tail lights on your trailer out for these Hopkins tail lights. These tail lights are going to be fully submergible in water, so you're going to be able to use them for your jet ski and your boat trailers, as well as your landscaping trailers. Or, if you have a skid loader trailer, that'll work for that too.These are going to be a good replacement for if you have a broken or damaged tail light. We do sell these in a single left or right rear tail light, or you can buy them in a set, like we have here.What's nice about this kit is that the left rear tail light is going to have an integrated white light underneath shining down on your license plate to make sure others can see your license plate while driving at night. more
7/2/2019 8:22:14 AM
Review of Optronics Trailer Lights - Tail Lights - STL0067RPG- Video
Today we're going to take a look at the ONE Series LED driver's side six-function submersible trailer tail light with the red lens. Now, this lED trailer tail light will serves six functions, offers stop, tail, turn, reflector, and side marker. Also, this one is the driver's side so it does have the license plate light on the bottom that illuminates your trailer's license plate for easy identification. This is a ONE Series design, provides a nice bright light using fewer diodes than other LED lights. It is sonically sealed. Waterproof housing and lens unit is submersible so it's ideal for use on trailers that'll be submerged like a boat trailer. more
7/1/2019 12:42:20 PM
Review of Optronics Trailer Lights - Tail Lights - STL0066RBG- Video
Today we're going to take a look at the ONE Series LED passenger side trailer five function submersible tail light with the red lens. Now this is an LED trailer combination tail light which serves five functions stop, tail, turn, reflector and side marker. It's a ONE Series design LED which provides bright light using fewer diodes than other LED lights, and it is sonically sealed waterproof housing and lens unit is submersible. Has a built in rear reflex reflector on it to remove the need for a separate reflector, and the LEDs make great replacements for incandescent lights because they'll last about 50 times longer. They're more efficient, provide brighter light with less power output and of course no bulbs to replace, no brittle filaments.It's a durable polycarbonate lens and housing. Has a red screw-on lens over white LED and it is a surface mount design for your trailer. more
7/1/2019 10:57:18 AM
Review of Peterson Trailer Lights - Trailer Lights - 415K- Video
Today we're going to take a look at the Peterson Round Submersible Trailer Backup Light with the grommet and the two wire plug. Now this is an incandescent trailer light. Which will provide a backup light function for trailers and utility trucks. It's a nice sealed waterproof housing and lens unit. It uses a premium bulb that's rated up to 15,000 hours and the bulb type it uses an 1156 dual filament design. Does use a wedge-base socket to prevent premature failure. more
6/18/2019 10:47:19 AM
Review of Peterson Trailer Lights - Clearance Lights - 425850- Video
Today, we're going to be taking a look at the Peterson Trailer Clearance Light. This is going to be a nice round lens, amber light to help you stay visible out on the road, and also stay compliant with all DOT laws. We'll have our two prongs to the back, so that we can get that mounted up to any of our wiring harnesses that look the same. It's a standard size, so there's a lot of different little wiring harnesses that'll work with this. Just plug that into the back. It does come with some dielectric grease on there, so you might notice there's some sticky stuff. more
6/12/2019 2:07:18 PM
Review of Optronics Trailer Lights - Clearance Lights - MCL61RB- Video
Today we'll be taking a look at the ThinLine LED Clearance or Side Marker Light. This is going to be a submersible light, so it'll work for our marine trailers where we need to have it stay nice and watertight, but it also works for just about any other trailer or enclosed trailer that you might want to mount it up on, and it should have a nice long life since we don't have to worry about any water or debris getting in there. It does have a sonically sealed, waterproof housing, so it is submersible.We'll have two diodes in there to give us our light. It's a rectangular style with a red lens. This can work out for your clearance or your side marker lights since this is P2 rated. Basically that means that it gives you 45 degrees of viewing from the center line or from when you're looking at it. more
6/12/2019 1:42:37 PM
Review of Optronics Trailer Lights - License Plate Lights - LPL81C1B- Video
Today we'll be taking a look at the Optronics LED trailer license plate light. This is going to illuminate your license plate on your trailer to make it visible to other drivers, and also to stay within DOT compliance. It's going to be durable housing, polycarbonate lens and housing's also made of that polycarbonate. This is sonically sealed, so that means that the housing and the lens unit are submersible. It's going to work for marine trailers or really any trailer that's going to be out in the elements for a long time. It's going to keep any dirt, water, debris from getting in there and causing issues with your electrical connections. more
6/5/2019 4:07:21 PM
Review of Peterson Trailer Lights - Red Reflector - B480R- Video
Today we'll be taking a little quick look at the Peterson Quick Mount Trailer Reflector. This helps to keep your trailer visible even when it doesn't have any lights on. You can see the reflector picks up the light and throws it right back at you, and that helps you know again where the trailer is. Has sort of a diamond pattern in there. It looks really nice. It's made of a durable acrylic construction. more
5/23/2019 10:42:49 AM
Review of Peterson Trailer Lights - Identification Light Bar - 428400- Video
Today we'll be taking a look at the Peterson thin line identification light bar. This has three lights sitting on one metal bracket, so it's all one piece. That makes it easy to have three clearance lights mounted up all at once.It's a pretty easy install. We'll just have one black power wire to connect and then it's grounded by the mounting holes, so I have my little alligator clamp on the back there going to that. It has two little indentions and that's where you'll put through your hardware. It doesn't come with any screws to get this installed, so you will have to pick that up on your own. more
5/20/2019 12:32:55 PM
Review of Optronics Trailer Lights - Stop Turn Tail Lights - STL22RBH- Video
Today we'll be taking a look at the Optronics Micro-Flex LED trailer light. This is going to have three different functions. We'll have our running lights, brake lights, and turn signal function, so we'll be able to stop, turn, and use our tail lights as well.Has a three-wire plug at the back, so it makes it easy to connect this up. Just plug it in to a three-pronged harness that fits that same design there. It's a pretty standard plug. You can find a lot of wiring options here at etrailer.com.The light has a Micro-Flex faceted lens, which just helps to reflect all that ambient light. more
5/20/2019 12:22:21 PM
Review of Peterson Trailer Lights - Stop Turn Tail Reverse Light - M880-7- Video
Today we'll be taking a look at the Peterson Trailer Tail Lights. This is going to offer you four different functions in one light. Right now I have it turned on with just a running light circuit, but it's also going to serve as your stop and tail light or turn light and it also gives you your backup function by giving you that white LED, just a clear light there.So it's really nice that it provides four in one and it's a really nice looking light, has that red lens going over most of our LED's and then the single byte one to serve as our reverse signal.The other advantage with using LEDs is that it keeps us from having to do any maintenance with our light, no bulbs to replace as there's no filaments that can break, so it's going to last for a long time. We really don't have to worry about it once it's installed.They're also going to be more efficient, use less power for just the same output of light and they don't really build up as much heat as your traditional incandescent bulb.It measures about six and a half inches long, by about two and a quarter inches wide side to side there and then from front to back, it's about an inch and a half deep going to that outer portion on our port here.Now on the back we'll have a plug to get our wiring functions. This is going to be part number 417-43, that's that three wire plug. You can find that here at etrailer.com using that part number, it is sold separately. more
5/20/2019 11:17:24 AM
Review of Optronics Trailer Lights - Interior Lights - 06001072B- Video
Today we're going to take a look at the Europa Incandescent RV Directional Light With Switch. This allows you to get a easy access little dome light in your RV, or your other vehicle if you want to mount it pretty much anywhere. We'll be able to swivel our light to get it where we need it to be, whether we're trying to read a map late at night, or just trying to read a book and one of the little nooks in our RV somewhere.Does swivel around. It's kind of . You kind of have to coax it a little bit, but it will give you some adjustability as far as getting that light pointed where you need it to look .. need it to be. more
5/8/2019 6:33:09 PM
Optronics Trailer Clearance and Side Marker Light Review and Installation- Video
Ryan: Hey, everybody. Ryan here at etrailer.com. Today we're going to be taking a look at, and showing you how to install the Optronics trailer clearance or side marker light, which is an incandescent bulb, and a red lens. Here we have our Optronics light in place and turned on. Even though this is a single incandescent bulb, this is going to put out enough light to keep you, not only safe, but legal. These lights are going to work great for a direct replacement. more
5/8/2019 11:27:51 AM
Review of Optronics Trailer Lights - Clearance Lights - MCL11SACKB- Video
Today we can take a look at the mini LED submersible clearance and marker light with locking ring. It's an Amber LED with the clear lens.Now this small round trailer light will function as both a clearance light or a side marker light when properly mounted.It's sonically sealed waterproof housing and lens unit is submersible has a stainless steel locking ring that will secure the light and prevent theft. And it's an LED so it makes great replacements for incandescent lights because the LEDs last 50 times longer, they're more efficient, provide brighter light with less power output and no bulbs to replace or no brittle filaments.It's a durable polycarbonate housing and lens. It is a clear lens over an Amber LED. It is compatible with 12 volt DC systems. It is a recessed Mount with the locking ring. more
5/2/2019 12:47:18 PM
Review of Peterson Trailer Lights - Clearance Lights - 428100- Video
Today we're taking a look at the Peterson Identification Light Bar. Now this unit adds or replaces an identification light bar on your trailer. The lights are incandescent lights so each one has one incandescent bulb. So we have a three-bulb design total. It is a submersible ID light bar for over 80 inch applications.We have a black polycarbonate base that's corrosion-proof, and again, it has three lights on it. Each one has a sealed design, so it is submersible. more
4/26/2019 7:48:07 AM
Review of Optronics Trailer Lights - Clearance Lights - MCL56AMB- Video
Today we're going to take a look at the Optronics LED Clearance or Side Marker Light. This is going to help you stay safe out on the road, help other drivers see where you are with your trailer, and acts as your side marker or your clearance light. Since this is P2 rated, it can really only be used as one or the other. It can't be used as both at the same time. We'll have the amber lens going over our white LED. This is going to be a sonically sealed light, so that means that our lens and our housing is submersible. more
4/25/2019 12:50:28 PM
Review of Optronics Trailer Lights - Tail Lights - BUL06CFB- Video
Today we're going to take a look at the LED backup light for truck or trailer. This light is going to give you that backup signal whenever you turn on your lights and you go into reverse. Helps to illuminate the night, make it a little easier to see where you're going, and also lets other drivers know that you're backing up.It's going to be a submersible light so it'll work out well for marine trailers as well as just your everyday trailer, enclosed trailers, other things like that. You can also use this on flatbed trucks. Anything that's going to have that larger, bulkier frame that you need this nice big recessed mount backup light for.It does have that built-in flange with a little kind of foam gasket there. Helps to give it a little bit of road shock protection and also seal up the back of our light.As you can see, my light is on right now. more
4/25/2019 12:50:15 PM
Peterson LED Light Kit Review- Video
Jake: Hey guys. This is Jake here at etrailer. We're going to be taking a look at, and showing you how to install, the Peterson LED Tail Light Kit for trailers over 80" wide.Now, these new LED tail lights are going to be a good replacement for your incandescent factory lights that might come on your trailer. They're also going to be great for those boat trailers because they are fully submergible so they're going to do well in those heavy water situations.Now, you're kit is going to come included with a full set of wiring in order to wire your whole trailer up, and this license plate holder in case your old one might be broken or brittle.So the LED lights that make up this tail light are going to be brighter, and draw less power from your system. They are also going to last 50 times longer than the standard incandescent bulbs.The dimensions of this light are going to be 5-3/8" long, 4-5/8" tall and 1-13/16th deep.Now the durable service mount technology in the LED circuit board is going to withstand those shocks and sharp jarring of the trailer.The included wiring harness is going to be 25 feet long. It does include a four pull connection so if you need a longer one or a different configuration just check etrailer.com.So here you can see we have our old incandescent lights. more
4/24/2019 2:42:14 PM
Dragon's Eye LED Clearance or Side Marker Light Review- Video
Jake: Hey guys. It's Jake here at etrailer. Today we're going to be taking a look at and show you how to install the Dragon Eye Amber Side Markers.This light is gonna have have two LED's, one on this side and one on this side. It's going to be pointed forward and backwards. The difference between this light and another lights is, that this light is gonna have an amber lens with clear LED's. Now, you do have an option on etrailer.com for a clear lens and amber LED's. more
4/24/2019 2:32:20 PM
Review of Optronics Hitch Step - Fixed Step - STL12RCB- Video
Today we'll be taking a look at the Optronics LED Trailer Tail Light. Now, this is going to have several functions including your stop, turn, and tail light. So, it'll act as those three functions. It is a submersible light so you can use this on boat trailers, enclosed trailers, pretty much anywhere where that will need to have those lightning functions.It is a sonically sealed light, so it's water-proof. Again, we can use it on a boat trailer. Our lens and housing is made of a durable polycarbonate. more
4/18/2019 7:04:43 PM
Diamond Dragon's Eye LED Clearance or Side Marker Light Review and Installation- Video
Today we're gonna be taking a look at and showing you how to install the Dragon's Eye LED Clearance or Side Marker Light.Now this is what the light's going to look like when it's turned on. As you can see, the two diodes put off more than enough light. I really like it because it's LED, which means you're not gonna have to worry about any brittle filaments breaking like your traditional style incandescent lights, and it's gonna use less power to put off a brighter light.Another reason I like this light is because how compact it is. It's going to measure only 2-5/8" long, 1-1/4" tall. From bolt hole to bolt hole, it's going to measure 1-15/16" and it's going to be 3/4" deep.The light is DOT compliant. It is a great upgrade from an incandescent light, because the LEDs last a lot longer. more
4/16/2019 10:07:32 AM
Optronics Light Guide LED Truck/Trailer Light Review and Installation BUL603CRB- Video
Today we're gonna be taking a look at, and showing you how to install, the Light Guide LED Truck and Trailer Light.Now what sets this light apart from many of the others is not only is it a super bright reverse light, you also have the added safety of a running light. Now these lights are LEDs, which are much more reliable than your traditional incandescent style bulb. Overall, they're gonna use less power and be brighter.Now here's the measurements to see if it'll work for your needs. The light itself is four and 5/16 of an inch round. The thickness of the light, without the plug, is an inch and 1/16 thick. If you add the plug on there, the thickness is gonna go up to one inch and 11/16.All right, here on the back of the light we have our connection points. more
4/15/2019 10:57:15 AM
Peterson LumenX LED Trailer Tail Light Review and Installation M826R-9- Video
Today we're going to be taking a look at and showing you how to install the Peterson-Lumenx LED Trailer Tail Light. This light's going to give us all our necessary functions like our running lights. Our turn signals and our brake lights. As you can see these LED's are really going to put off a lot of light. Not only help keep you safe but other passengers on the road as well.Now what sets this light apart from any of the others is that it's LED. Those LED's are going to last a lot longer, they're going to be more reliable because you don't have to worry about any brittle filaments like tour traditional incandescent light has. more
4/15/2019 10:52:15 AM
Optronics ONE LED Trailer Tail Light Review and Installation- Video
Today, we're gonna be taking a look at and showing you how to install the Optronics ONE LED trailer taillight. This light's going to provide us with all our necessary functions to help us stay legal and safe, such as our running lights, our turn signals and our brake lights. As you can see, even with fewer diodes than most they're still more than bright enough to keep visible. Now what I really like about these lights is that their LED, which means you're not gonna have to worry about any brittle filaments like your traditional style incandescence light, which means they're gonna be more reliable, last a lot longer, put out a brighter light all while using less power. These lights are sonically sealed, which means they can't be submersed. However, my personal opinion, I would not have power to it when doing so or keep it under water for any length of time.It does have a polycarbonate lens which is going to be nice and durable and less susceptible to cracking. more
4/15/2019 10:42:52 AM
