Trailer Wiring Harness Installation - 2007 Jeep Liberty- Video
Today on our 2007 Jeep Liberty, we'll be installing the Tow Ready T-One Connector, part number 118524. Now this particular vehicle already has some additional wiring installed that will allow it to be towed behind a motor home so we're going to do things a little different on this one. Because we know we cannot pull the taillights completely off on this vehicle, we're going to go ahead and run the green wire with the two connectors over to the passenger's side leaving the box as well as the yellow, the small red and the ground wire over on the driver's side. We'll run the wire underneath the lower rear bumper fascia. Securing it with zip ties and running it behind some of the brackets that hold the rear bumper on. Now that we have it over to the passenger's side, we'll go ahead and remove the passenger's side rear taillight by first opening up the rear hatch of the vehicle and then removing the two Torx head screws shown here. Now that we have these two screws out, we'll go ahead and pull the light assembly out. more
10/24/2014 1:15:51 PM
