Trailer Wiring Harness Installation - 2011 Chevrolet Silverado- Video
Today on our 2011 Chevy Silverado we're going to review and install the Bargman custom fit vehicle wiring harness with a seven blade trailer connector, part number 54701-003. Now to begin our install, we need to find the mounting location for our new seven blade trailer connector. For our application we're going to mount ours here in the side rail of the pick up bed just behind the tail light. Next, we're going to make a pilot hole where we're going to mount our seven blade connector. Then we'll open up our pilot hole to two inches with our hole saw bit. Next, we'll go ahead and take the T-connector portion of our wiring harness, feeding it through our pre-drilled hole. Continue feeding the entire wire into the pickup bed side until our molded connector is up against the bed side how we're ready to secure it. more
8/17/2015 12:11:35 PM
Trailer Wiring Harness Installation - 2011 Chevrolet Silverado 50-97-410- Video
Today on our two thousand eleven Chevrolet Silverado, we're gonna review and install the Bardman fifth wheel gooseneck ninety degree wiring harness with seven pull trailer connector part number five zero dash nine seven dash four one zero. Now to begin our install, we need to find the mounting location for our new seven blade trailer connector. For our application, we're gonna mount ours here in the side rail of the pickup bed, just behind the tail light. Next, we're going to make a pilot hole where we're gonna mount our seven blade connector. Then we'll open up our pilot hole to two inches with our hole saw bit. Next, we'll go ahead and take the t-connector portion of our wiring harness, feeding it through our pre-drilled hole. Continue feeding the entire wire into the pickup bed side until our molded connector is up against the bedside and we're ready to secure it. To secure the connector, we'll use the self tapping screws provided with the install kit. Now just like that, our seven blade connector is mounted, and we'll move underneath to make our wiring connections. We're here underneath the pickup bed's side, below the tail light, behind the bumper. more
8/17/2015 12:11:06 PM
Hopkins Endurance Fifth Wheel Wiring Harness Installation - 2011 Chevrolet Silverado- Video
All right, today on this 2011 Chevrolet Silverado, we're going to install part number 41157 from Hopkins. This is the Endurance 5th Wheel gooseneck, 90 degree wire harness. All right, first thing we do is go ahead and find a location in the truck bed to install this. In this case, we're going to be right behind the taillight, below the stake pocket about 3/4 of the way down to the bed. Once we know where we're going to put our connector, we'll go ahead and drill out a pilot hole. We're going to drill out a 1/4 inch hole first, then go back at it with our hole saw. The hole saw we are using will be 2 and 1/8 inches. more
10/4/2013 8:21:33 AM
Pollak Twist-In Trailer Connector Installation - 2011 Chevrolet Silverado- Video
All right. Today, on this 2011 Chevrolet Silverado, we're going to install Part Number PK11916. Now, our truck has a cap for the wiring harness, but doesn't have a plug in it all ready. So first step, we're going to go ahead and remove the cap. Looking at the cap in the bumper, we'll push down on a small tab on the left hand side. We'll use a screw driver to help push it out then we'll twist the cap. more
4/22/2013 5:38:51 AM
Fifth Wheel and Gooseneck Wiring Harness Installation - 2011 Chevrolet Silverado- Video
Today on this 2011 Chevy Silverado were going to install the tow ready 5th wheel Gooseneck 7 way tow harness extension part number 20110. Before we can begin making any installations, we need to locate where we are going to mount our 7 pole connection in the bed. This will fit to the sheet metal of the bed and then make a connection with our wire. Were going to mount our 7 pole connector on this area here, so first what were going to use is a small drill bit, go ahead and make my hole and then check the area to make sure that I'm not going to run into any obstruction. Im just going to leave my drill bit sitting there so I can then look from underneath and verify that there are no obstructions and then well drill it out to our two inch hole. All right thats for double checking I know were good, so now we go ahead and drill out to our two inch hole. more
12/19/2011 10:16:10 AM
