Hello neighbors. It's Brad here at etrailer and today we're taking a look at installing the custom Redarc mounting panel for your brake controller on a 2019 Toyota Sequoia. In many times when mounting up the Redarc, you're gonna be using this little plate and it's gonna need a hole drilled in the dash for this to slide in and you can kind of put it wherever you want which is fine. But the problem is you are drilling into your dash and if you have options to make the installation easier and a little bit cleaner, this is gonna be the option for it because this fits into your Toyota knockout plate. You can simply take out the old one here and then this pops in place just as it would as an OEM. So it's in a really nice spot here. more
8/3/2022 10:06:05 AM
Trailer Brake Controller Installation - 2008 Toyota Sequoia- Video
Today we are going to be installing brake control part number 90185, the Prodigy, along with the Prodigy wiring harness, part number 3040-P, on a 2008 Toyota Sequoia. We are inside the vehicle now, and the first thing that we are going to do is to locate the aftermarket port that we are going to plug the 3040-P into. The first thing we want to do is go ahead and remove this. There is actually a thumbscrew right here that needs to be removed and then there are a couple of pop rivets here that you just need to pry away from, then pull that out into position. You might need to actually remove a little bit of the bottom plate here, as well, to allow the plate to be removed. And you can see there are a bunch of electrical connections here. The port is kind of hidden that we are going to be connecting to. It is actually taped to this blue harness here, almost by the fuses. You can see I have already cut the tape here and I can pull the connector out, right there. more
1/19/2009 7:35:03 AM
Filter Videos
Filter Videos
