Trailer Brake Controller Installation - 2012 Toyota Tundra- Video
Today in our 2012 Toyota Tundra, we'll be installing the Curt TriFlex Trailer Brake Controller part number C51140. We'll be using this in conjunction with the direct connect wiring harness part number C51362. To begin our install, we'll first locate the manufacturer's tow port located on the driver side just above the edge of the kick panel. We can then take the direct connect harness white plug end and plug directly into the manufacturer's tow port. We'll then go ahead and start routing the harness over towards the center of the vehicle near the console being careful to stay away from any moving parts, such as the parking brake pedal. Next, we need to mount the brake controller. To mount the brake controller, we'll use the brake controller bracket and hardware provided with the install kit. We'll go ahead and take the hardware and secure the bracket directly to the brake controller first. Then we can take the bracket and secure itto the dash using the hardware provided. more
12/3/2013 2:26:21 PM
