bing tracking image

Chevrolet Corvette Trailer Hitch Installation And Review Videos

     

Curt Trailer Hitch Installation - 1977 Chevrolet Corvette- Video

Curt Trailer Hitch Installation - 1977 Chevrolet Corvette

Speaker 1: Today on our 1977 Chevrolet Corvette, we're gonna take a look at and show you how to install the Curt Custom Fit Class I Trailer Hitch Receiver offering the 1-1/4" by 1-1/4" receiver tube opening. Its part number is: C11758. Now, here's what our hitch is gonna look like installed on the Corvette. As you can see, all you're really gonna have is your receiver tube opening. Most of your bracing and cross braces are gonna be hidden up behind that rear fascia, which is nice. It'll keep a nice clean look here on the back of the car. more


Watch Video

10/11/2017 3:22:10 PM



Trailer Hitch Installation - 2002 Chevrolet Corvette- Video

Trailer Hitch Installation - 2002 Chevrolet Corvette

We are going to install part number 11034 from Curt on a 2002 Chevrolet Corvette. As you can see here, we already have one of the mufflers taken down already. Basically we did that to give you a better view of the frame. This is such a tight working area to begin with. The instructions say you do not have to do it, but I think overall it would be worth the effort to take down the mufflers and get your work done and then put them back up when you are done. What is going to happen is the hitch is going to install on this frame rail here and on the end of this frame rail here behind the bumper. What we are going to do is hold the hitch up into place, center it, and we are going to mark our holes. To take down the muffler, there is a bracket right here that gets unbolted. And you can simply pull it down and get our exhaust out of the way. And this clamp right here, which is in its original position right here, we just loosen it up and just push it back. Then we can take the whole assembly off. more


Watch Video

4/27/2009 8:53:21 AM



Trailer Hitch Installation - 2005 Chevrolet Corvette- Video

Trailer Hitch Installation - 2005 Chevrolet Corvette

Today we are going to install part number 11380 from Curt, and we are going to install this hitch on a 2005 Chevrolet Corvette. This is a base Corvette, with none of the performance packages from the factory installed on this vehicle. If you do have a performance package on here you will run into a problem with the muffler. Sometimes the muffler length will interfere with installing the hitch. If you have a base Corvette you can install this hitch with relatively no problems with clearances. But you may want to have to double-check if you do have a performance package. We will show you the attaching points where the hitch installs. more


Watch Video

1/12/2009 9:37:36 AM



  1