Redarc Tow-Pro Liberty Brake Controller Installation - 2010 Dodge Nitro- Video
Hey everybody. Clayton here at etrailer.com. Here at etrailer, we install, test, and review, a lot of different products to help you as a customer make a more educated decision before your purchase. Today we're gonna be working on a 2010 Dodge Nitro. We're gonna be taking a look at and I'll be showing you how to install the Redarc Tow Pro Liberty Brake Controller. This is what our Redarc is gonna look like installed. more
4/13/2021 2:13:00 PM
Trailer Brake Controller Installation - 2011 Dodge Nitro- Video
Today on this 2011 Dodge Nitro we're going to show you a Tekonsha Voyager Brake Controller, part number 39510. With this brake controller we're also going to need a couple additional parts. We're going to need part number ETBC7. This is the brake controller installation kit, and also we're going to use part number 18136 from Tow Ready. This is a universal mounting bracket. When we do our install, we'll actually start with that part first. This is what the Tekonsha Voyager Brake Controller looks like installed in a typical location. more
6/30/2015 2:04:58 PM
Trailer Brake Controller Installation - 2010 Dodge Nitro- Video
Today on this 2010 Dodge Nitro we are going to install brake controller part number 90885 from Tekonsha. This is their Prodigy P2 brake controller. And to install this, we are going to use part number ETBC7. The first thing we need to do is go ahead and take the bracket from the ETBC7 kit. We are going to install that on to the bracket that is on the hitch. The next step is to go ahead and do some partial assembly on the 7-pole itself. What we will do is we will go ahead and add the gray cable that comes with the kit and we will hook it up to our 7-pole connector. What we are going to do is actually just wind this up in electric tape and leave our leads out that we need. We are going to leave our 4-pole sticking out and we are going to need our brake wire which is going to be blue and out black wire for 12 volt power supply. And then we will just wrap up our purple and white wires. Our white wire is going to go directly to the frame for ground. And then the purple wire is going to be for reverse lights if it is ever needed. And to our black and blue wires we are going to install the grey cable that has the black and white wires inside of it. What we are going to do is just peel away the grey sheath. Then stripe our wires back and make our connections: black to black and white to blue. Cover those up with some electric tape. Next we will go ahead and install the loom along the wires like this. 1:20 more
4/1/2011 2:49:41 PM
Filter Videos
Filter Videos
