Hopkins Plug-N-Tow Trailer Wiring Harness Installation - 2003 Toyota Highlander- Video
Today on our 2003 Toyota Highlander, we'll be installing the Hopkins Plug and Tow Vehicle Wiring Harness with Four Pole Trailer Connector, part number 33425. Right here behind the driver's side tail light, there's two little tabs here. Remove that and that will let us gain access to the wiring behind the tail light. Let's go ahead and set aside. Next, we'll go ahead and take the spare tire cover and set it aside and go ahead and take this panel pull it up out of the way. There's a couple push fasteners here that connect this so we're going to go ahead and take those out so we can go ahead and remove this threshold and this plastic compartment so we can run our wire across. Next, we'll go over to the passenger side here and remove a couple of panels. more
5/26/2015 9:48:09 AM
Trailer Wiring Harness Installation - 2003 Toyota Highlander- Video
Today on our 2003 Toyota Highlander, well be installing Tow Ready T-1 connector, part 118413. To begin our installation, well need remove the rear cargo cover, the spare tire cover, inside compartment cover; well also remove the panels behind the taillights. With all of our interior removed from the vehicle, well now have access to our wiring. Well need to unplug the harness at the connector just behind the taillight. With the connector unplugged, well feed the brown and yellow wire from our T-1 connector up behind the body panel to our taillight assembly. We can then connect the factory harness into one side of our T-1 connector and the other side well plug in to the taillight. more
6/1/2012 10:08:08 AM
