Best 2012 Dodge Journey Trailer Wiring Options- LED Tail Lights- Video
Today on our 2012 Dodge Journey we'll be looking at our best trailer wiring options. We have two options here today. Both of these options are for Dodge Journeys that have LED taillights. If you have incandescent taillights, which are just standard light bulbs, we have different options available for you on our website. Right over here to the right is the Tekonsha T-One connector, part number 118536. To the left is the CURT custom vehicle-to-trailer wiring harness, part number C56154. Both of our wiring harnesses here give us a standard four-pole flat connector to hook up to our trailer. more
1/17/2017 3:54:51 PM
Best 2012 Dodge Journey Trailer Wiring Options- Video
Today on our 2012 Dodge Journey, we'll be having a look at our best trailer wiring options. Okay, we have two wiring options here today. Both of these options are for Dodge Journeys that have LED taillights. Over here to our right, we have the Tekonsha T1, part number 118536, and over there to the left we have the Curt T Connector, part number C 56154. Now if you're curious if your vehicle has LED taillights, we have a look over at our Dodge Journey here. We can show you what those look like. more
12/14/2016 2:43:03 PM
Trailer Wiring Harness Installation - 2012 Dodge Journey- Video
Today on our 2012 Dodge Journey we will be installing the tow-ready T-1 vehicle wiring harness, part number 118536. To begin our install, we will first open up the rear hatch. We will need to access the wiring behind the tail lights. To remove the tail light assemblies, remove the two push-pin fasteners on each side. To remove the push-pin fasteners, we will generally pry out on the center of the fastener and then remove the fastener completely. Once we remove the two push-pin fasteners, we will gently pop the tail light assembly out of its position, releasing the alignment tabs underneath, being careful not to break them. Now with one side done, we will go ahead and repeat the same process on the other side. Now we have access to both tail light wiring assemblies. Starting on the driver's side, we will begin routing our new tow-ready T-1 wiring harness. We will take the green wire connector and feed it between the rear fascia or buffer cover and the body or sheet metal of the vehicle. We will repeat the same process with our four-pole connector. more
1/14/2014 2:24:35 PM
