Best 2011 Dodge Journey Trailer Wiring Options-- LED Tail Lights- Video
Today on our 2011 Dodge Journey, we'll be looking at our best trailer wiring options. All right. We have two options here today. Both of these options are for Dodge Journeys that have LED tail lights. If you have incandescent tail lights, which are just standard light bulbs, we have different options available for you on our website. Right over here to the right is the Tekonsha T-One Connector, part number 118536. To the left is the Curt Custom Vehicle to Trailer Wiring Harness, part number C56154. more
1/17/2017 9:51:02 AM
Best 2011 Dodge Journey Trailer Wiring Options- Video
Today on our 2011 Dodge Journey we'll be having a look at our best trailer wiring options. We have two wiring options here today. Both of these options are for Dodge Journeys that have LED taillights. Over here to our right we have the Tekonsha T1, part number 118536. Over here to the left we have the CURT T-Connector, part number C56154. Now if you're curious if your vehicle has LED taillights, if we have a look over at our Dodge Journey here we can show you what those look like. They have these rings with multiple lights going around the outside edge. more
12/14/2016 2:42:29 PM
Trailer Wiring Harness Installation - 2011 Dodge Journey- Video
Today on our 2011 Dodge Journey, we'll be installing the Tow Ready T-One Vehicle Wiring Harness, part number 118536. To begin our install we'll first go ahead and open up the rear cargo hatch. Then we'll remove the two fasteners that secure the taillight housing on the driver's side. These are pushpin fasteners so we'll use a flat blade screwdriver to pry the center out and then remove the entire fastener. Next we'll go ahead and gently pull backwards on the taillight assembly unlocking the two fasteners underneath, be careful as you remove the taillight assembly that you don't break the alignment tabs underneath. We'll go ahead and repeat this same process for the opposite side. Next we can take the new tow ready harness and take our yellow wire connector and red wire connector and plug them in line with the manufacturer's wiring to the taillight assembly starting with the yellow wire connector or gray connector on the manufacturer's side. more
10/10/2014 10:25:24 AM
