Roadmaster Direct-Connect Base Plate Kit Installation - 2021 Toyota Tacoma- Video
Hello, neighbors, it's Brad here at etrailer, and today we're taking a look and installing the Roadmaster Baseplate on a 2021 Toyota Tacoma. And this is what your baseplate is gonna look like when it's installed on your truck. And overall, it's a pretty clean look. It's exposed so you can see the entire thing across, but it sits underneath the front bumper well enough to where it has a pretty clean look overall. Now it does have a mounting point for your breakaway switch, as well as your six-pole, which is a nice added convenience. You won't have to worry about fabricating anything up there. more
2/26/2024 11:01:52 AM
Roadmaster EZ5 Base Plate Kit Installation - 2018 Toyota Tacoma- Video
Speaker 1: Today on our 2018 Toyota Tacoma, we're going be installing Roadmaster's EZ5 Base Plate kit, part number RM-521196-5.This base plate is gonna allow you to tow your vehicle behind your RV, motor home, or whatever else you want to pull it with. It's going to be tucked up nicely behind the bumper, so you're almost not even going to notice it's there. Even when the arms are installed that connect to your tow bars, they're only going be slightly in front of your bumper there, so they don't stick out too far, so you don't have to worry as much about walking around it while they're in and banging up your leg on it.When you're ready to hook up your tow bars, simply slide in the arms on each end, then twist it to lock it in place. You'll do that with the other arm as well, and now you can make your connection. On the front of your base plate, you're going have locations to mount your safety chains, your breakaway switch, and your 6 volt connector for your wiring. It has all the necessary brackets and everything to make it easy to install all the other components you'll need for a flat tow set up. more
7/16/2018 10:07:15 PM
Roadmaster XL Base Plate Kit Installation - 2003 Toyota Tacoma- Video
Today on 2003 Toyota Tacoma, we're going to be taking a look at and showing you how to install the Roadmaster XL Base Plate Kit with Removable Arms, part number 1159-1. Here's what it looks like once it's installed. It's going to use all three existing holes in the frame with the exception of this U-bolt that's going to slide over the top of the frame on the rearmost part. This base plate is designed to be used with all the Roadmaster tow bars, quick connects and standard tow bar. When you take out the pin, it's going to be virtually undetectable from the front of the vehicle, as you remove your cables, or you can just tuck them up inside and zip tie them out of the way. First up on our Toyota, it's going to be to remove the factory tow hook in this loop here and the same thing on the driver's side. We'll use a 17 mm socket and let's remove those. more
8/2/2016 4:06:38 PM
Filter Videos
Filter Videos
