Trailer Hitch Installation - 2007 Toyota Prius - Hidden hitch- Video
Today on our 2007 Toyota Prius, we'll be installing Hidden Hitch part number 60894. This is what our hitch will look like once installed. Next we'll go ahead and give you couple measurements to assist your selecting accessories for your new hitch. From the center of the hitch pin hole to the outer most edge of the bumper is one and a half inches. From the top of the receiver tube opening to the ground is ten and a half inches. This will assist your selecting accessories such as a ball mount, bike rack or cargo carrier. more
9/29/2014 9:33:41 AM
Trailer Hitch Installation - 2007 Toyota Prius - Draw-Tite- Video
Today on our 2007 Toyota Prius well be installing the Draw-Tite Hitch, part number 24808. This is what our hitch will look like once its installed. Next well go ahead and give you a couple measurements to assist your selecting accessories for your new hitch. From the center of the hitch pin hole to the outermost edge of the bumper is 1-1/2 inches. From the top of the receiver tube opening to the ground is 10-1/2 inches. This will assist your selecting accessories such as a ball mount, bike rack or cargo carrier. Now well go ahead with installation. First to begin our install well first need to remove the underbody panel on the drivers side. more
9/29/2014 9:31:58 AM
Trailer Hitch Installation - 2007 Toyota Prius- Video
Today we are going to install part number 11468 from Curt and we are installing this on a 2007 Toyota Prius. First thing we need to do is take down this shield right here. This will come off and the hitch will go in the place where this tie down hook is. Once we take this shield off we can unbolt this hook and there is another hook on the passenger side that we need to take off also. The first thing we need to do is take down this shield here for now. We will end up trimming it when we put the hitch back up. Alright, next we will want to take down the tie down bracket. Now go do the same thing for the other side. Next we can go ahead and install the hitch onto the vehicle and you can actually put the passenger side over the exhaust and let you help hold it up while you do the driver side first. Once you have the hitch held up by a couple bolts, it is a good idea to go ahead and snug down the bolts to help you line up the hitch with the rest of the holes. Alright once you get your holes lined up, you will have to move around the hitch a little bit and get your last bolt on this side started. Go ahead and snug it up and then go back and do the remaining one on the driver side. more
8/7/2008 11:26:30 AM
