Curt Trailer Hitch Installation - 2012 Subaru Outback Wagon- Video
Hello, neighbors. It's Brad here at etrailer. And today, we're gonna be installing a CURT trailer hitch on a 2012 Subaru Outback. Installed on the Subaru, the hitch looks really nice. In fact, it just has the receiver tube opening hanging down as it uses the bumper support to mount up the hitch. So you get a nice clean look and a little bit more added ground clearance than having the rest of the hitch hanging down. more
11/15/2021 1:44:09 PM
Trailer Hitch Installation - 2012 Subaru Outback Wagon - Curt- Video
Today on our 2012 Subaru Outback Wagon, we'll be taking a look at and installing the Curt Custom Fit Class 2 Trailer Hitch Receiver, part number C12290. Here's what our hitch will look like once it's installed. It's going to have that nice black pattern coat finish, and sleek look and design on the back of the vehicle. It's going to be tucked up underneath the back end here, and almost flush with the back end of the vehicle. It's only going to be out maybe about a half an inch, tucked back underneath the back end of the bumper, so you won't be backing into anything or have to worry about that clearance on the back side. It's going to have an inch and a quarter by inch and a quarter receiver tube opening, with a tongue weight capacity of 350 pounds, and a max towing capacity of 3500 pounds with that nice cleat steel chain tie downs for safety. It's going to have a fully welded design and fairly easy installation with only minor drilling. more
12/22/2015 8:37:21 AM
Trailer Hitch Installation - 2012 Subaru Outback Wagon - Curt 13390- Video
Today on our 2012 Subaru Outback Wagon, we will be taking a look at and installing the Curt Custom Fit Class 3 trailer hitch receiver, part number 13390. We'll give you a few measurements to help you in selecting some hitch accessories, such as ball mounts, bike racks, and cargo carriers. From the top of the receiver tube to the ground is going to be about 14". From the center of the pin hole to the outermost edge of the bumper is going to be about 2 1/2". Here's what our hitch is going to look like once it's installed. It's going to have that nice round bar design and it's going to be nice and sleek against the back end of the vehicle with that black powder coat finish to help prevent any kind of rust and corrosion. With it's fully welded design, it's going to be nice and sturdy, offering a 600 pound tongue weight capacity and 4000 pound towing capacity with it's 2" by 2" receiver tube opening and plate steel design. It's going to have a 5/8" pin hole going straight through the center. more
12/22/2015 8:36:06 AM
Trailer Hitch Installation - 2012 Subaru Outback Wagon - Draw-Tite- Video
Today on this 2012 Subaru Outback Wagon were going to install part number 75673 from Draw Tite. This is what the hitch looks like when its installed on the vehicle. Next well go ahead and give you some measurements thatll help you out in selecting some accessories such as a ball mount, a bicycle rack, or a cargo carrier. From the center of the hitch pin hole to the edge of the bumper will be five and three-quarter inches. From top of receiver opening down to the ground will be about 16 inches. Now Ill go ahead and show you how the hitch is installed. more
10/8/2012 10:57:53 PM
Trailer Hitch Installation - 2012 Subaru Outback Wagon - Hidden Hitch- Video
Today on this 2012 Subaru Outback Wagon were going to install part number 90208 from Hidden Hitch. Now well go ahead and give you some measurements to help you out in selecting some accessories such as a bicycle rack or a cargo carrier. From top of receiver opening down to the ground will be 14 inches. From the center of the hitch pin hole to the edge of the bumper will be four and a half inches. Now Ill go ahead and show you how the hitch is installed. Our first step is to go ahead and remove the muffler. more
10/8/2012 3:46:12 PM
Trailer Hitch Installation - 2012 Subaru Outback Wagon - Draw-Tite 36493- Video
Today on this 2012 Subaru Outback Wagon we're going to install part number 36493, from Draw-Tite. Now we'll go ahead and give you some measurements to help you out in selecting some accessories such as a bicycle rack or a cargo carrier. From top of receiver opening down to the ground will be 14 inches. From the center of the hitch pin hole to the edge of the bumper will be four and a half inches. Now I'll go ahead and show you how the hitch is installed. Our first step is to go ahead and remove the muffler. more
10/8/2012 10:45:00 AM
