Best 2009 Nissan Rogue Trailer Hitch Options- Video
Hey everybody, Ryan here at etrailer. Today, for the 2009 Nissan Rogue, we're gonna be checking out our best trailer hitch options. We're gonna be looking at three different hitches available for the road: the etrailer.com, the CURT, and the Draw-Tite. And don't get me wrong, they're all fairly similar to the next one, but if you we're to ask me what one I would pick for my own Rogue, it'd be either the etrailer or the CURT. Honestly, I'd lean more towards the etrailer one just 'cause I like the way it looks a little bit better, the finish of it, more of a matte black, and I think it blends in a little bit, but that's not the only reason, the appearance. The etrailer and the CURT are going to have a little bit higher Tongue Weight capacities, so you can load them down a little bit more, and the receiver tube is gonna come out just a little bit further than the Draw-Tite, so it buys you a little bit of extra bumper clearance. more
8/24/2023 11:54:40 AM
Best 2009 Nissan Rogue Trailer Hitch Options 75902- Video
Hey, everybody, Ryan here at etrailer today for the 2009 Nissan Rogue. We're gonna be checking out our best trailer hitch options. We're gonna be looking at three different hitches available for the road, the etrailer.com, the CURT, and the Draw-Tite. And don't get me wrong, they're all fairly similar to the next one, but if you we're to ask me what one I would pick for my own Rogue, it'd be either the etrailer or the CURT. Honestly, I'd lean more towards the etrailer one just 'cause I like the way it looks a little bit better, the finish of it, more of a matte black, and I think it blends in a little bit, but that's not the only reason, you know, the appearance. The etrailer and the CURT are going to have a little bit higher ton weight capacities so you can, you know, load 'em down a little bit more, and the receiver tube is gonna come out just a little bit further than the Draw-Tite so it buys you a little bit of extra bumper clearance and that's important, especially if you plan on using folding-type accessories. more
8/3/2023 11:37:02 AM
Trailer Hitch Installation - 2009 Nissan Rogue - Curt- Video
Today on our 2009 Nissan Rogue, we're going to be taking a look at showing you how to install the Curt class II custom fit trailer hitch receiver, part number C12122.So here's what our hitch looks like once we have it fully installed. The cross tube's going to be hidden behind the bumper here and all we're going to see is the receiver tube sticking out. Our hitch is a class II hitch, which means it's going to give us an inch and a quarter by inch and a quarter receiver tube opening. This will be good for some bike racks, smaller cargo carriers or light duty towing.The way we're going to mount all of our accessories is the hitch has a hole here in the side and it is going to accept a standard half inch pin and clip. And these aren't included in the kit, but you can pick them up here at etrailer.com along with some locking devices to make sure your accessories are secure.Our safety chain connection points are going to be a loop style, bolted to the bottom of the receive tube. And you can see we'll have plenty of room to get most sized hooks on and off.Curt does recommend using a safety strap when carrying any non-trailer loads, such as a bike rack or a cargo carrier.Our hitch is going to have a tongue weight of 350 pounds, which is the maximum downward force at the receiver tube. more
12/19/2018 10:02:21 AM
Best 2009 Nissan Rogue Trailer Hitch Options e98846- Video
Today we're going to be taking a look at the best hitch options for your 2009 Nissan Rogue. Up top here we're going to have our etrailer brand hitch. Then right below that we're going to have our CURT hitch. Then finally down here at the bottom we're going to have our Draw-Tite hitch. Now all three of them are going to be Class 3 hitches, which means they're going to give us that 2" by 2" receiver tube opening and give us a wide variety of options for accessories to mount up. But if I was looking for a hitch for my Rogue, I would definitely go with the etrailer hitch for a few different reasons. more
12/14/2018 1:32:28 PM
Trailer Hitch Installation - 2009 Nissan Rogue - Draw-Tite- Video
Today on our 2009 Nissan Rogue, we're gonna be taking a look at showing you how to install the Draw Tite class three custom fit trailer hitch receiver, part number 75902. So here's what our hitch looks like once we have it installed. The cross tube is going to be hidden behind the bumper, and all we're going to see is the receiver tube sticking out. It is a class three hitch, means it's going to give us that two inch by two inch receiver tube opening, and we're going to have a lot of different options whenever it comes to accessories to mount up.The way we're gonna mount any of our accessories to the larger hole towards the front of our vehicle, and it's gonna accept a standard five ace pin and clip. Now these are not included in the kit, but you can pick them up here at etrailer.com as well as some locking devices to keep your accessories safe. The secondary hole towards the receiver tube opening here is going to be exclusively for the J pin stabilization device, and that's going to be nice for any of those accessories that don't have a built-in anti rattle to keep the noise down whenever you're driving down the road.Our safety chain connection point is gonna be a loop style welded to the bottom of the receiver tube, and as you can see, we're going to have plenty of room to get most size hooks on or off. more
12/14/2018 1:17:53 PM
Trailer Hitch Installation - 2009 Nissan Rogue - Draw-Tite 36542- Video
Today on our 2009 Nissan Rogue we're going to be taking a look at and showing you how to install the Draw-Tite Class 2 custom fit trailer hitch receiver, part number 36542. Here's what our hitch is going to look like once we have it installed. The crosstube is going to be hidden pretty well behind the bumper and all we're going to see is the receiver tube sticking out.It's a Class 2 hitch, which means it's going to give us that 1-1/4" by 1-1/4" receiver tube opening, which is going to be great for bike racks, small cargo carriers, and some light duty towing. The way we're going to mount any of our accessories is through the hitch pin hole here on the side. It is going to accept a standard 1/2" pin and clip. These aren't included in the kit but you can pick them up here at etrailer.com, along with locking devices to keep your accessories secure.Our safety chain connection point's going to be a loop style welded to the bottom of the receiver tube. more
12/14/2018 1:17:33 PM
Trailer Hitch Installation - 2009 Nissan Rogue - Curt C13204- Video
Today on our 2009 Nissan Rogue we're going to be taking a look at and showing you how to install the CURT Class 3 custom fit trailer hitch receiver, part number C13204. Here's what our hitch is going to look like once we have it installed. The crosstube's going to be hidden pretty well behind the bumper and all we're going to see is that receiver tube sticking out.It's a Class 3 hitch, which means it's going to give us that 2" by 2" receiver tube opening, which is going to have a lot of different options for accessories that we can mount up. The way we're going to mount all of our accessories is through the hitch pin hole here on the side. It is going to accept a standard 5/8 pin and clip. These aren't included in the kit but you can pick them up here at etrailer.com along with some locking devices to make sure your accessories are secure.The safety chain connection points are going to be a loop style welded to the bottom of the receiver tube. more
12/14/2018 1:17:13 PM
