Curt Trailer Hitch Installation - 2010 Mazda CX-9- Video
Today in our 2010 Mazda CX Nine, we're gonna do a review and install of the Curt class two, one and a quarter inch receiver two pitch, part number C12112. Here's what our hitch will look like once it's installed. As you can see it's a fully welded construction with a nice black finish. So it blends in with the underbody of our vehicle. Here, we have a rectangular cross tube and a receiver tube, keeping a good percentage of our hitch hidden behind the rear face ship. This is a one and a quarter inch by one and a quarter inch receiver tube, half inch pre-drilled hole on both sides of the receiver tube for our pin or lock and chain hold downs for securing our trailer. more
6/6/2022 1:38:19 PM
Best 2010 Mazda CX-9 Hitch Options- Video
Today on our 2010 Mazda CX9 we'll be looking at our best hitch options. We have three hitches here today. On the top we have a CURT class three, part number 13575. The middle one here is a Draw-Tite class three; it's part number 75531. Finally on the bottom is a CURT class two, part number C12112. Now you may notice our CURT hitches have a rectangular steel construction, whereas our Draw-Tite hitch here is a round tubular design. Doesn't really make much of a difference there at all. more
11/15/2016 11:45:14 AM
Trailer Hitch Installation - 2010 Mazda CX-9 - Curt- Video
Today on our 2010 Mazda CX9, were going to be installing the Curt Hitch, part number 13575. This is what our hitch will look like once its installed. Here are a couple of measurements that will assist you in selecting accessories for your new hitch. From the center of the hitch pinhole to the outermost edge of the bumper is 4-3/4 inches. From the top of the receiver tube to the ground is 12-3/4 inches. This will assist you in selecting accessories such as a drawbar, a bike rack, or a cargo carrier. more
5/3/2012 3:56:30 PM
